FSG 49 Maintenance and Repair Shop Equipment

Maintenance and Repair Shop Equipment

Note-Specialized equipment which is designed for automotive maintenance and repair, and which is also used for the maintenance and repair of nonautomotive vehicles or equipment, will be classified in Class 4910. Jigs, fixtures, and templates used in conjunction with maintenance and repair shop specialized equipment are classified in this group. However, jigs, fixtures, and templates used in conjunction with metalworking machinery are classified in Group 34. Infrared assemblies, subassemblies, and components specifically designed as test and maintenance specialized equipment are classified in the appropriate classes of this group. Excluded from this group is infrared equipment designed for testing communications and night vision equipment.

Supply Items Included in Federal Supply Group 49
MONITOR,PHASE

An item which provides continual quantitative visual indication of cyclic variations between two or more phases of electrical energy, warning upon departure from predetermined phase variation limits. May initiate an audible warning. See also PANEL, MONITOR.

SIMULATOR,GYROSCOPE SIGNAL

An item whose electrical output provides synthetic signals similar to those produced by a gyroscope(s).

SIMULATOR,NAVIGATIONAL CONTROLS

An item whose electrical output provides synthetic signals similar to those produced by navigational controls.

CALIBRATOR SET,INSTRUMENT APPROACH SYSTEM

A fixed number of components and/or items, not all having the same basic name which are required for evaluating the overall performance of an instrument approach system. May exclude certain operating components supplied separately or already present at the point of usuage.

SIMULATOR SUBASSEMBLY,SONAR TARGET SIGNAL

Two or more different types of items having a common mounting or mounted on each other which together form a portion of a sonar target signal simulator but which in itself is not a complete functioning item and cannot be assigned a more definite item name.

CALIBRATOR,COMPUTER

An item specifically designed to determine by comparison the correct values of a computer.

HOLDER,METER

TEST SET,AUTOMATIC PILOT

A test set primarily designed for use in making examinations of automatic pilots and their components.

TEST SET,AUTOMATIC PILOT FLIGHT CONTROLLER

A test set primarily designed for use in making examinations of CONTROLLER, FLIGHT, AUTOMATIC PILOT.

TEST SET,AUTOMATIC PILOT INTEGRATORS

A test set specifically designed for use in making examinations of pitch, yaw, and drift integrators of an automatic pilot. See also TEST SET, AUTOMATIC PILOT.

TEST SET,BOMB DIRECTOR

A test set primarily designed for use in making examinations of a bomb director.

TEST SET,FIRE CONTROL SYSTEM

A test set primarily designed for use in making examinations of a fire control system. Excludes TEST SET, BOMB DIRECTOR.

TEST SET,FLIGHT CONTROL SYSTEM

A test set primarily designed for use in making examinations of a flight control system.

TEST SET,INDICATOR

A test set specifically designed for use in making examinations of indicators.

TEST SET,RADOME

A test set primarily designed for use in making examinations of radomes.

TEST SET,REMOTE SWITCHING CONTROL

A test set designed primarily for use in making electrical examinations of a remote switching control. It tests the continuity of circuits and/or checks the operation and positioning of remote setting switches.

TEST SET,SYNCHRO

A test set primarily designed for use in making examinations of the operation of synchros, such as measuring the accuracy of angular motion. See also TRANSFORMER, SYNCHRO OVERLOAD.

TESTER,STARTER TORQUE

A device designed to measure and indicate the torque developed by an engine starter.

TESTER,CYLINDER COMPRESSION

A device designed for testing the compression of engine cylinders.

ADAPTER,TEST

An adapter which provides facilities for electrically connecting an item to be tested and a piece of test equipment. Do not use for interconnecting cables. Includes plug-in electronic component socket adapters which provide terminations for dynamic testing while an electronic component is inserted. See also COUPLER, TEST SET.

STAND,MAINTENANCE,AIRCRAFT ENGINE

A structure designed for overhauling, assembling, disassembling and repairing aircraft engines. See also STAND, AIRCRAFT ENGINE; TEST STAND, AIRCRAFT ENGINE and STAND, MAINTENANCE, RAIL TYPE.

STAND,MAINTENANCE,AIRCRAFT ENGINE ACCESSORIES

See also STAND, MAINTENANCE, RAIL TYPE.

STAND,MAINTENANCE,AIRCRAFT ENGINE NACELLE

See also SUPPORT, AIRCRAFT ENGINE NACELLE; and STAND, MAINTENANCE, RAIL TYPE.

STAND,MAINTENANCE,AIRCRAFT POWER UNIT

See also STAND, MAINTENANCE, RAIL TYPE.

STAND,MAINTENANCE,AIRCRAFT TURRET

TEST STAND,IGNITION MAGNETO

A device designed for testing the electrical output and operating characteristics of a MAGNETO, IGNITION.

TEST STAND,AIRCRAFT GENERATOR

A device designed to test the performance and operational characteristics of aircraft generators.

TEST STAND,AIRCRAFT ENGINE

A device designed to test the performance and/or operational characteristics of aircraft engines. For mobile items, see TEST STAND, ENGINE, SEMITRAILER MOUNTED. See also STAND, AIRCRAFT ENGINE; and STAND, MAINTENANCE, AIRCRAFT ENGINE.

CASE,TEST SET

INTERCONNECTING BOX

An inclosure which includes mounts and protects such items as switches, circuit breakers, jacks, fuseholders, connectors, terminals and/or terminal boards, resistors, capacitors, transformers, and the like. It is primarily designed to interconnect two or more electrical and/or electronic items, except primary power source(s) such as generator(s) and battery(ies). It may include a cover or door. For inclosures which connect one or more primary power source(s) to one or more electrical and/or electronic item(s), see DISTRIBUTION BOX. See also CIRCUIT BREAKER BOX; TERMINAL BOX and INTERCONNECTING CABINET.

GRINDING MACHINE,VALVE FACE

A grinding machine designed to reface internal combustion engine valves. It may be equipped to perform other related operations such as grinding valve ends, tappets, and rocker arms.

TEST STAND,OIL TEMPERATURE CONTROL VALVE

A device designed to test the performance and operating characteristics of engine oil temperature control valves, at simulated actual operating conditions.

TESTER,PRESSURIZED CABIN LEAKAGE,AIRCRAFT

A unit designed for testing, on the ground, the volume of air leakage from aircraft pressurized cabins.

ACTUATOR,ELECTRO-MECHANICAL,ROTARY

A self-contained power transmitting device designed to convert electrical energy into controlled mechanical force, in the form of torque (rotational mechanical movement). Comprised of an electric motor(s), gear box(es), limit switch(es), and such accessories as required for the specific moving and positioning of other components. Excludes hydraulic and pneumatic cylinders and screwjacks.

TEST STAND,HYDRAULIC SYSTEM COMPONENTS

A cabinetlike item usually with a front work area and consisting of the necessary instrumentation, integral hydraulic system and component mounting facilities. Designed to provide the hydraulic pressure for testing and/or calibrating hydraulic system components, such as valves, actuating cylinders, pressure regulators, accumulators, hose lines, hand and/or engine driven pumps and the like. May include facilities for filling and checking hydraulic systems for leakage and performance. See also PUMPING UNIT, HYDRAULIC.

TABLE,RADAR MAINTENANCE

A table equipped with various electrical receptacles, circuit breakers, and terminal boards used in the maintenance, repair or testing of radar equipment.

TABLE,ELECTRICAL TEST AND MAINTENANCE

A table designed for general use in the testing of electrical circuits in the maintenance of instruments and appliances operated by electricity.

ANALYZER SET,ENGINE

A complete multiple test unit designed for use in the testing of exhaust, ignition, voltage, revolutions per minute, etc., of a gasoline or diesel engine. Excludes ANALYZER, IGNITION AND VIBRATION, RECIPROCATING ENGINE.

POWER DISTRIBUTION-REFERENCE SIGNAL GROUP

A collection of items, with the dual function of distributing electrical power to other components, and of providing signals which are used as a reference in time, amplitude, frequency, and the like.

TESTER,PITOT AND STATIC SYSTEMS

A device designed to check the pitot and static systems of aircraft, guided missiles, rockets or the like for leaks. It may also be used to calibrate air speed indicators, altimeters, rate of climb indicators and machmeters.

TESTER,STATIC SYSTEM

A device specifically designed to check the static tube system of a guided missile, rocket, or the like for leakage. Excludes TESTER, PITOT AND STATIC SYSTEMS.

SIMULATOR,RADAR TARGET

An item whose reflection properties are similar to those of a radar target. It is designed for fixed position installation so that its range and azimuth, with respect to the equipment with which it is used is known. It is normally used for the calibration of a radar set. See also TARGET, RADAR.

TABLE,TILTING,GYRO INSTRUMENT TESTING

DYNAMOMETER,RUN-IN

A mechanical device used for running-in new and rebuilt internal combustion engines under load prior to their applicable installation by simulating actual load conditions and applying them to the engines. It employs a closed hydraulic turbine torque absorption system, and includes a tachometer, intake manifold vacuum gage, temperature gage, and indicator plate for valve operation. Excludes DYNAMOMETER, VEHICLE CHASSIS, SINGLE DRIVE.

TESTER,EXHAUST GAS TEMPERATURE CIRCUIT

A unit primarily designed for examining the exhaust gas temperature circuit of a jet aircraft for error. It induces artifical heat to simulate engine operating temperatures. It may also be used to perform tests on aircraft thermoswitches and/or exhaust gas temperature indicators.

TEST CENTRAL,AIRBORNE WEAPONS SYSTEM,AUTOMATIC

A grouping of set(s) two or more set(s), for the automatic coordinated preflight testing of weapons systems, subsystems, and components thereof, of an aircraft, and provide a display and/or printed readout of malfunction areas.

INDICATOR,DISTANCE

An indicator for the direct display of the spacing between two or more points or objects, such as aircraft or ships, in scalar values, such as feet, yards, miles, and the like.

TEST STAND,DEMAND OXYGEN REGULATOR

An apparatus designed to test demand type oxygen regulators for flow capacities, oxygen concentration and pressure characteristics at the desired altitudes.

TEST STAND,ENGINE,SEMITRAILER MOUNTED

A mobile unit usually equipped with a control booth, instrumentation, engine controls, auxiliary power unit, fuel, oil, electrical systems, and the like, primarily designed for testing aircraft engine.

HOLDER,MAINTENANCE FIXTURE,MULTIPOSITION

A device having a stationary or adjustable base with movable arm(s) for affixing maintenance fixtures to hold items in convenient working positions. It is commonly used for benchwork and may be free standing. For items which include maintenance fixtures, see MAINTENANCE FIXTURE (as modified).

TEST HARNESS,AUTOMATIC PILOT SYSTEM

A collection of items specifically designed to be used in test, repair and overhaul operations of automatic pilot systems and components. It must contain specific bracketing for mounting, supporting and/or positioning two or more automatic pilot components. It may include electrical cabling and tools for operating and adjusting the components. Do not use for a collection of similar items designed to be used in testing, overhauling, or repairing a single component of an automatic pilot system.

ACCUMULATOR,HYDRAULIC

An accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

PARTS KIT,RADAR TEST SET

GRINDING MACHINE,VALVE SEAT,ELECTRIC

A motor driven grinding machine that utilizes an abrasive wheel, designed for precision grinding and refinishing of internal combustion engine valve seats. It consists essentially of a base, upright and grinding supports, work holder, electric motor(s), spindle(s), grinding head(s), gage(s), and any necessary accessories such as diamond dressers and abrasive wheel sets. It usually has a coolant system for wet grinding and it may be portable (disassembled in container base) for ease of transportation. Excludes GRINDING KIT, VALVE SEAT, ELECTRIC.

PHASEMETER

An item that indicates in electrical degrees the displacement between two or more wave forms. See also INDICATOR, PHASE SEQUENCE.

STAND,MAINTENANCE,RAIL TYPE

An item consisting of a pair of horizontal parallel rails or tracks mounted on telescoping legs with adjustable foot assemblies and rail coupling devices. Designed for supporting engine cradles, missile component cradles, and the like, during maintenance operations and transferring of the cradles from one rail type transporting and/or storage vehicle to the other. Excludes rail type maintenance stands having attached cradles or additional equipment designed for specific items.

LEVEL,TEST STAND

A device which utilizes a VIAL, LEVEL. It is used for leveling, adjusting and setting angles for test stand of which it is a component part.

OILER AND PICKLER,AIRCRAFT ENGINE,TRAILER MOUNTED

A complete unit capable of being transported by land or air. It is designed to preoil all internal moving parts of aircraft reciprocating engines after removal from storage and to coat with a protective pickling solution prior to storage for prevention of rust, corrosion, and the like.

PANEL,PATCHING,PROGRAMMING

A panel consisting of s single flat-surfaced item which contains contact springs, jacks, sockets, and the like, and is encased in a frame assembly. It is used for connecting to the internal wiring of the electronic equipmetnt in use. It may be designed to accept either nonremovable or interchangeable patchboards that can be programmed with patchords to create the circuit required for a given operation. Excludes PANEL, PATCHING, ANTENNA; PANEL, PATCHING, COMMUNICATION; and SWITCHBOARD, PATCHING, COMMUNICATION. See alos PATCHBAORD, ELECTRICAL.

BORESIGHTING EQUIPMENT,WEAPON

An item consisting of a combination of various devices designed to bring the bore axis into parallel alignment with the line of sight of the aiming system. It may include a target sighting disk.

SHOP EQUIPMENT,AIRCRAFT ARMAMENT SHELTER MOUNTED

SHOP EQUIPMENT,AIRCRAFT FIRE CONTROL

SHOP EQUIPMENT,AIRCRAFT,SHIP MOUNTED

A group of maintenance equipment items not all having the same basic name, which are of supplementary nature to a major component or equipment and permanently mounted aboard an ocean-going vessel.

PARTS KIT,HYDRAULIC JACK

PARTS KIT,SEAL REPLACEMENT,MECHANICAL EQUIPMENT

A parts kit consisting of numerous items. The kit may contain seals, gaskets, packing, and/or retainers for repairing mechanical equipment. Excludes kits including tools, collars, pins, sleeves and associated hardware. Excluds PARTS KIT (1), SEAL REPLACEMENT, ARTILLERY.

PARTS KIT,SERVO VALVE

A parts kit used to repair a SERVOVALVE, HYDRAULIC.

KEYBOARD,DATA ENTRY

A device for data input by key depression which causes the generation of the selected character, numeral or the like.

TEST EQUIPMENT,HELICOPTER ROTOR HEAD BALANCE AND BLADE TRACK RUN

A group of items such as balancers, tracker blade strobex, beam indicator scales, magnetic pick-ups, mechanical accelerometers, patch targets, cables and other accessories for testing the rotor head balance and the rotor blade track run of a helicopter. It does not contain spare replacements.

TOOL AND EQUIPMENT KIT,AIRCRAFT EJECTION SEAT

A group of items specifically designed to perform maintenance on an aircraft ejection seat.

TOOL AND EQUIPMENT KIT,RADIO SET

A group of items specifically designed to perform maintenance on a radio set.

MASK,PLASMA SPRAY

A item usually metallic with an open pattern, mounted on a part(s) to cover selected areas during a metal coating (deposition) process. The item may have attaching hardware consisting of a base assembly, knob, spring, clamp, plate, and the like.

FIXTURE,AIRCRAFT MAINTENANCE

A fixture designed to hold/position aircraft components to facilitate inspection, repair, testing and/or replacement of components. D0 not use if a more specific name applies. See FIXTURE (1) (as modified).

ADAPTER KIT,TEST

An adapter kit containing items such as adapters, cables, power supply, switching units, and auxiliary test means. Cases and special tools may be included. It is used to adapt items to the standard interface of a piece of test equipment.

TEST PROGRAM SET

A collection of items consisting of electrical/electronic and other specialized equipment used for inspection, fault isolation, maintenance and/or repair and any other evaluations of the components and/or equipment. May include cables, fixtures, interface test adapter, software and operational instructions.

MAINTENANCE KIT,AIRCRAFT

A maintenance kit for components of airplanes, helicopters, and the like.

TOOL KIT,CYLINDER COMPRESSION TESTER

A group of items with special tools used in conjunction with TEST, CYLINDER COMPRESSION.

CASE,ELECTRICAL-ELECTRONIC TEST AND MEASURING EQUIPMENT

A case specifically designed for electrical-electronic test and measuring equipment. It may be designed to protect against shock and vibration.

FIXTURE SET,AIRCRAFT MAINTENANCE

A group of two or more FIXTURE (1), AIRCRAFT MAINTENANCE. It may also include attachment hardware, gaskets, valves and fittings.

MAINTENANCE SUPPORT STATION

A group of items used to reprogram all reprogrammable devices within a computer controlled aircraft system. It is capable of interfacing with other related systems, reprogramming software and developing and updating software tools required to maintain the system. It houses the equipment required to process software changes such as interface units, instruction manuals, stimuli cabinets containing one or more independent computer systems, and computer programs for processing environmental changes. It also contains line replaceable units representing a mock-up of the unit being sustained.

TEST SET,STORES MANAGEMENT SYSTEM

A test set specifically designed for testing and fault isolation of a stores management system (SMS) WHICH PROVIDES THE PILOT AND NAVIGATOR OF AN AIRCRAFT WITH WEAPON STORES STATUS AND A MICROPROCESSOR-PROGRAMMED CONTROL OVER THE OPERATION AND SAFETY-CRITICAL RELEASE OF ALL AIRCRAFT STORES.

REPAIR KIT,AIRCRAFT,MAINTENANCE

A group of tools and parts used for equipment maintenance or repair. May provide replacement parts to facilitate such functions as inspection, test and repair, for the specific purpose of restoring and/or improving operational status of a component or equipment.

TEST SET,AIRCRAFT ENGINE

A test set primarily designed for use in making examinations of the performance and/or characteristics of aircraft engines.

TEST SET,COUNTERMEASURES SET

A test set primarily designed for use in making examinations of a countermeasures set. Excludes TEST SET, COUNTERMEASURES DISPENSING SET.

TEST SET GROUP,COUNTERMEASURES

A group that provides facilities for testing countermeasures.

TEST STATION,PNEUMATIC SYSTEM COMPONENTS,AIRCRAFT

A group of items containing a console and peripheral equipment specifically designed for use in testing pneumatic components of aircraft such as valves, controls, and pressure regulators. May also supply fuel, condition air, and provide a mechanical loading system along with appropriate instrumentation and data acquisition/control logic for testing. See also TEST SET, PNEUMATIC SYSTEM COMPONENTS.

ADAPTER KIT,HYDRAULIC SYSTEM COMPONENTS TEST STAND

An adapter kit containing items such as adapters and connecting hardware. It is used to connect hydraulic system components to a TEST STAND, HYDRAULIC SYSTEM COMPONENTS. See also ADAPTER SET, HYDRAULIC SYSTEM COMPONENTS TEST STAND.

ADAPTER SET,HYDRAULIC SYSTEM COMPONENTS TEST STAND

A collection of various types and sizes of adapters used to connect aircraft hydraulic components to a TEST STAND, HYDRAULIC SYSTEM COMPONENTS. May include a display rack, container, or the like, for ease in selecting and storing the adapters. Excludes ADAPTER SET, TEST. See also ADAPTER KIT (1), HYDRAULIC SYSTEM COMPONENTS TEST STAND.

TEST STATION,ELECTRICAL-ELECTRONIC EQUIPMENT

A group of items including a console and peripheral equipment specifically designed for use in testing electrical-electronic equipment. May include self-test capabilities. See TEST STATION, GUIDED MISSILE; FAULT LOCATOR (as modified)

ADAPTER GROUP,COMPUTER TEST SET

A group of items composed of the necessary test card assemblies, extender assemblies, cables, plugs and the like to be used as an interface between the computer test set and item under test.

TEST SET,STORES MANAGEMENT SUBSYSTEM

An item specifically designed for providing the necessary shop testing of the stores release equipment of an aircraft, such as air-to-ground pylons, launchers, adapters and bomb racks. Differs from TEST SET, STORES MANAGEMENT SYSTEM, in that it does not test the entire system, but the shop replaceable subsystems of the stores management system.

CONTROL PANEL,TEST

A panel that is specifically designed to control the actions of and is an integral part of a test set or a test station. Excludes PANEL, TEST, ELECTRICAL; PANEL, POWER DISTRIBUTION; PANEL, INDICATOR; and PANEL BLANK.

MODIFICATION KIT,MAINTENANCE AND REPAIR SHOP EQUIPMENT

An item or items employed to modify specially designed maintenance or repair shop equipments.

TEST STATION,RADAR,AIRCRAFT

A group of electrical and/or electronic general purpose test equipment, primarily designed for use in making examinations of radar equipment. A controlled environment is required. See also, SIMULATOR (1), RADAR TARGET and SIMULATOR (1) , RADAR TEST EQUIPMENT.

COMPARATOR SET,AREA FLOW

A collection of items used to measure the change in the mean flow area of each individual opening on gas producing turbine nozzles.

TEST STAND,ELECTRO-OPTICAL SYSTEM COMPONENTS

An item containing the necessary instrumentation and mounting facilities for testing and/or calibrating electro-optical components such as those in targeting and navigation systems.

TEST STATION,FUEL CONTROL SYSTEM COMPONENTS

A group of items containing a console and/or perpheral equipment specifically designed to provide appropriate instrumentation and data acquisition/control logic for testing of components of an aircraft fuel system.

TEST STATION,GYRO

A group of items containing a console(s) and/or peripheral equipment specifically designed to provide appropriate instrumentation and data acquisition/control logic for testing gyro's and/or components.

BATTERY COMPARTMENT,NIGHT VISION VIEWER

A hollow cylindrical or rectangular item designed to house the batteries required for the functioning of a VIEWER,NIGHT VISION.

TEST SET,ENVIRONMENTAL CONTROL SYSTEM,AIRCRAFT

A test set designed to make examinations of environmental control systems such as air conditioning, heating, pressurization, and the like, which affect the interior of an aircraft.

NOISE SUPPRESSOR SYSTEM,AIRCRAFT

An enclosed cell designed to suppress noise during the trim/power testing of aircraft engines.

TEST STATION,PHOTOMETRIC SYSTEM-SYSTEM COMPONENTS

A cabinet or bench style item consisting of instruments, mechanical and electrical/electronic equipment required to test and/or fault isolate a photometric system or components of a photometric system such as those in a heads-up display or multi-function display.

HEATER,AIRCRAFT ENGINE MAINTENANCE

A specifically designed heating device used to heat engine components such as turbines, flanges, bearings, seals and the like, during maintenance/assembly. Usually has external/remote controls and an external power source.

TEST SET SUBASSEMBLY,AIRCRAFT COMPONENTS

TEST STATION,AIRCRAFT EJECTION SEAT

A grouping of items containing all necessary electrical/electronic and peripheral equipment designed to perform fault isolation and functional/operational testing of aircraft ejection seats.

TEST STATION,RADIO FREQUENCY

A test station containing a console and peripheral equipment specifically designed to perform fault isolation and functional/operational testing of radio frequency system(s) for aircraft. Excludes TEST STATION, ELECTRICAL-ELECTRONIC EQUIPMENT.

RIGGING KIT,AIRCRAFT MAINTENANCE

A collection of items such as pins, brackets, support cables, measuring devices, and the like used to secure components in place while maintenance, inspection, removal and/or installation is being performed on adjoining components. Not normally used in servicing functions. May include carring/storage case. Excludes MAINTENANCE KIT (1), AIRCRAFT.

TEMPLATE,CONTROL RIGGING,AIRCRAFT

A device made of metal and/or plastic used for the aligment of controls and/or components of an aircraft control system and/or aircraft engine. It may have a graduated scale for measurement and/or holes for the insertion of rigging pins.

BELLMOUTH ASSEMBLY,ENGINE TEST FACILITY,AIRCRAFT

A fabricated device, generally constructed with a flared end and a straight type body. It is designed to be mounted in front of aircraft engines during testing. It may have probes.

ACCESSORY KIT,TEST SET

An accessory kit containing two or more supplemental items, such as attentuators, dummy loads, BRIDGE, IMPEDANCE, isolation transformers, and the like which are necessary to perform test and/or perform maintenance procedures on a piece of equipment or a system in conjunction with a TEST SET, (as modified).

INSTALLATION KIT,SHOP EQUIPMENT

An installation kit to adapt a SHOP EQUIPMENT (as modified) in a container, trailer, semitrailer, shelter or the like.

TESTING MACHINE,ELECTROMECHANICAL ACTUATOR

A device designed to check the functions and pre-set data of an electromechanically actuated component.

STAND,MAINTENANCE,AIRCRAFT WHEEL

A stand designed to support aircraft wheels during assembly, disassembly, repair and/or overhaul. May have retaining facilities and/or a flat working surface mounted on the framework.

BORESIGHTING EQUIPMENT,AIRCRAFT ORDNANCE

A specific number of devices designed to check the harmonization or possibly boresighting of the armament system installed in an aircraft with the opto-electronic target kit in simulated flight systems of the aircraft on the ground.

SIZING RING,SEAL,HYDRAULIC ACTUATOR

An item designed to alter the diameter of an existing hole without damage to the original material. It makes the altered item tight and secure.

FIXTURE,ENGINE MAINTENANCE,AIRCRAFT

A fixture designed to hold/position aircraft engine/engine components to facilitate inspection, maintenance, repair, testing and/or replacement of components.

FIXTURE,FUEL SYSTEM COMPONENTS,AIRCRAFT

A fixture designed to hold/position fuel system components/subassemblies to facilitate inspection, maintenance, repair, testing and/or replacement.

FIXTURE,HYDRAULIC SYSTEM COMPONENTS,AIRCRAFT

A fixture designed to hold/position aircraft hydraulic system components/subassemblies to facilitate inspection, maintenance, repair, testing and/or replacement.

FIXTURE,PNEUMATIC SYSTEMS COMPONENTS,AIRCRAFT

A fixture designed to be attached to aircraft pneumatic system components/subassemblies to facilitate inspection, maintenance, repair, testing and/or replacement.

INSTALLATION AND REMOVAL TOOL,BUSHING

An item specifically designed to perform attaching and interface functions on aircraft fuel tanks.

CONTROLLER,COMPOSITE REPAIR SET,AIRCRAFT

A unit designed to control temperature, pressure and vacuum over a programmable period of time to bond composite materials. See also COMPOSITE REPAIR SET, AIRCRAFT.

COMPOSITE REPAIR SET,AIRCRAFT

A portable set which provides the capability to automatically generate, control and monitor vacuum pressure, cure time, and temperature of dry-out andrepair of bonded composite aircraft structures. Set shall include CONTROLLER, COMPOSITE REPAIR SET, AIRCRAFT, monitoring devices, heating blankets, vacuum source, temperature indicators/recorders and and necessary cables/connectors.

TANK UNIT,TEST,AIRCRAFT COMPONENTS

A container used with a TEST STAND (as modified) or TEST STATION (as modified) to facilitate testing of aircraft components. May include gauges, hook up lines, controller, adapters and the like. May be base mounted or car contained for portability.

COMPUTER,TEST DATA,AIRCRAFT MAINTENANCE

An item which as an insertion or modular design is part of a test kit or test facility. It controls test runs, compares mechanical and electric/electronic values of the components to be checked with stored nominal data and enables the printout of test logs.

MASK,SHOT PEEN

A device designed to shield and protect an item during the shot blasting process.

ROTATOR,ENGINE

A motorized device designed to facilitate indexing the first stage compressor for installing or removing the turbine blades.

PANEL,INTERFACE DEVICE

An item which is specifically designed to contain wiring and circuitry components necessary to interface the Avionic Unit Under Test and the prime Automatic Test Equipment.

ACCESSORY SET,INTERFACE DEVICE

A grouping of various hardware items such as extender cards, adapter, probes, cable assemblies, indicator overlays, alignment fixtures, and the like, to support the testing of units Under Test on the Automatic Test Equipment as required by the Test Program Set.

FIXTURE ASSEMBLY,TEST,INTERFACE DEVICE

A device which provides additional circuitry to resolve incompatibilites between the Unit Under Test and the Automatic Test Equipment, which is not appropriate for inclusion in the PANEL, INTERFACE DEVICE because of weight, size or heat limitations. It may also be used as a holding fixture to secure the Unit Under Test.

FIXTURE ASSEMBLY,HOLDING,INTERFACE DEVICE

A specifically designed item used to maintain proper positioning of an Avionic Unit Under Test during testing on Automatic Test Equipment.

ADAPTER ASSEMBLY,INTERFACE DEVICE

A device designed to facilitate connection, provide accommodation, enable application, to permit use of a given item with an unlike item.

CABLE ASSEMBLY,INTERFACE DEVICE,ELECTRICAL

A specifically designed item, with or without branches, having one or more ends processed or terminated in fittings for use between Units Under Test and interface devices.

CABLE ASSEMBLY SET,INTERFACE DEVICE,ELECTRICAL

A grouping of items having the same basic name for use with two or more separate CABLE ASSEMBLY, INTERFACE DEVICE.

ADAPTER SET,AIRCRAFT MAINTENANCE

A group of two or more ADAPTERS (1) used to facilitate aircraft maintenance/repair. May also be used to assist in installation/removal of aircraft components. All parts may be contained in a bag or case. Excludes ADAPTER SET, TEST.

REPAIR KIT,COMPOSITE

A group of items such as fiberglass, epoxy resin compounds, and the like.

TEST SET,IGNITION,AIRCRAFT ENGINE

A collection of items designed to provide status of various components of an aircraft engine ignition system.

HOLDER,TEST STRIP

A supporting/holding piece designed to temporarily secure a test strip for coating, stripping, shotpeening, or painting processes, during maintenance and repair of aircraft components.

MASK,DRUM ROTOR DISK

An item designed to protect the drum rotor disk during various repair procedures.

STAND,MAINTENANCE,AIRCRAFT WING

A structure designed for assembly, disassembly and repair of aircraft wings and/or wing sections.

TEMPLATE,ENGINE MAINTENANCE,AIRCRAFT

A device designed to facilitate the alignment of engine components during assembly/disassembly. May have locating pins, drill points, special markings, and the like.

JIG,COMPOSITE REPAIR,AIRCRAFT

A jig designed to facilitate alignment for bonding of layers of composite materials of aircraft structural components.

MOLD,COMPOSITE REPAIR,AIRCRAFT

A contoured fixture designed to facilitate the layup, forming, and curing of composite aircraft skin sections.

TEST SET,COUNTERMEASURES DISPENSING SET

A test set primarily designed for use in making examinations of a DISPENSING SET, COUNTERMEASURES. It may include one or more test units, carrying case, cable, computer and the like.

TEMPLATE,AIRCRAFT MAINTENANCE

A device designed to facilitate the alignment of aircraft components during assembly/disassembly. May have locating pins, drill points, special markings and the like. See also TEMPLATE, ENGINE MAINTENANCE, AIRCRAFT, and TEMPLATE, CONTROL RIGGING, AIRCRAFT.

DRAWER,ELECTRICAL TEST SET ADAPTER

An item designed to fulfil a partial function in an ADAPTER (2), TEST which is constructed as a drawer unit. The item is not functional without other drawer units.

FIXTURE,MACHINING,AIRCRAFT ENGINE MAINTENANCE

A fixture designed to hold aircraft engine or auxiliary power unit individual parts, subassemblies, or assemblies in position for machining to design tolerances during modification or repair.

JIG,ALIGNMENT,AIRCRAFT MAINTENANCE

A jig designed to align aircraft components during maintenance and/or test procedures.

JIG,BONDING,AIRCRAFT MAINTENANCE

A jig designed to align and secure aircraft components during bonding processes. Excludes JIG(1),COMPOSITE REPAIR,AIRCRAFT.

JIG,DRILL,AIRCRAFT ENGINE MAINTENANCE

A jig designed to align drill points when performing maintenance on aircraft engine components.

JIG,DRILL,AIRCRAFT MAINTENANCE

A jig designed to align drill points when performing maintenance on aircraft components.

TEST KIT,AERIAL REFUELING BOOM NOZZLE

A collection of items designed to test an aerial refueling boom nozzle.

ADAPTER SUBASSEMBLY,ELECTRICAL TEST SET

An item which is a subassembly of an Adapter, Electrical Test Set and cannot be assigned a more definite item name.

GUARD,SAFETY,COMPONENT TESTING,AIRCRAFT

An item used for the protection of the testing personnel, when testing equipment for aircraft components such as valves, pumps, hoses, actuating cyclinders or motor components to be tested.

PROBE ASSEMBLY,VACUUM

A device attached to a Composite Repair set which is used to monitor vacuum pressure during the repair of bonded composite structures.

CASE,TURBINE ENGINE COMPONENTS,AIRCRAFT

A reusable item with various shapes and designed to store aircraft turbine engine components during maintenance operations. It may have several compartments and a carrying handle.

CASE,TOOL KIT,AIRCRAFT MAINTENANCE

A reusable item with various shapes designed to store tool kits for maintenance operations. It may have several compartments and a carrying handle.

COOLING CIRCUIT,TEST BENCH,AIRCRAFT RADAR

A cooling circuit consisting of pipes, sleeves, fittings, and the like, and used to reduce the temperature of an aircraft radar during maintenance and/or repair.

JAW SET,SIZING

Two or more similar items used to produce the proper dimensions of aircraft engine components during maintenance or repair.

ADAPTER,PRESSURE TEST

An item which provides the facilities for connecting hydraulic or pneumatic items to be tested to a piece of test equipment. Excludes ADAPTER, MECHANICAL TEST; and ADAPTER (2), TEST.

TEST SET,HYDRAULIC FLUID,AIRCRAFT

A system designed to provide both hydraulic power to and perform various functional and operational checks of the aircraft hydraulics systems without the necessity of starting and running the aircraft's engines.

ADAPTER,TEST BLOCK

An adapter which provides the facilities for connecting hydraulic or pneumatic items to be tested to a piece of test equipment. Excludes ADAPTER, MECHANICAL TEST and ADAPTER (2), TEST.

TEST PLUG,AIRCRAFT COMPONENT

A device designed to replace a valve or the like in a hydraulic/pneumatic component or system for the purpose of testing during repair/maintenance and/or overhaul. Excludes PLUG, TUBE REPAIR and PLUE,(as modified).

TEST STAND,AIRCRAFT OXYGEN SYSTEM COMPONENTS

A Test Stand which has the necessary instrumentation, mechanical and electrical facilities for testing the components of an aircraft oxygen system such as CONCENTRATOR, OXYGEN, AIRCRAFT. May include work surface and storage space for test accessories such as hoses, adapters, and the like. Excludes TEST STAND, DEMAND OXYGEN REGULATOR.

TEST SET,FUEL CONTROL SYSTEM

An item specifically designed to provide appropriate instrumentation and data acquisition/control logic for testing of an aircraft or vehicular fuel system and/or components.

ADAPTER,CABLE BREAKOUT

An item designed to electrically and physically accommodate cable connectors and the terminations to which the cable would normally be connected, and thereby provide facilities for the insertion of test equipment leads, probes, and the like, for test and/or monitoring of power, intelligence, and the like, that may be on the wire complement of the cable. The item may provide facilities for either series, shunt, or interwire tests of the cable under actual operating conditions.

ADAPTER SET,CABLE BREAKOUT

A set consisting of two or more ADAPTER, CABLE BREAKOUT with associated connecting cables that provide facilities for the insertion of test equipment leads, probes, and the like, for test and/or monitoring of power, intelligence, and the like, that may be on the wire complement of the cable. The item may provide facilities for either series, shunt, or interwire tests of the cable while under actual operating conditions.

ADAPTER SET,TEST

A grouping of items consisting of two or more ADAPTER (2), TEST. May include a mounting, or other facility for storage and rapid access to individual adapters.

CALIBRATOR,BAROSWITCH TEST SET

An item designed specifically to be used with baroswitch standards, altimeter standards, or the like, to calibrate a baroswitch test set. It may also include the standards.

CONDUCTIVITY CELL,BATTERY WATER TESTING

A plastic cuplike item consisting of a base to which five (5) standard spaced contractor pins are attached, two of the pins having platinum or platinum plated electrodes firmly attached thereto inside the cup. The cup is provided with a removable cap individually fitted to the inside diameter of same. Used as a component in a battery-water tester assembly to determine whether the water to be used in storage batteries has been contaminated.

CONSOLE,POWER DISTRIBUTION

A console specifically designed to distribute and control electrical power. It includes equipment to supply either alternating or direct current of various output characteristics.

COUPLER,TEST SET

A component which provides a means of transfer of electrical energy between a test set and another component(s). See also ADAPTER, TEST.

COUPLER,SELECTOR,TEST SET

A single component with the dual function of providing coupler facilities, and of selecting components of another item during the conduct of a testing operation.

DOLLY,TEST EQUIPMENT

A hand-propelled device consisting of three or more wheels attached to a frame, and designed for carrying or supporting test equipment. May include facilities for connecting and interconnecting components of the test equipment to obtain electrical operating power or functional utility. Test equipment components are not included.

RECORDER-SIMULATOR

A single component with the dual function of providing synthetic signals, and of making a permanent representation of these signals in a form suitable for analysis.

SIMULATOR,ACCELEROMETER SIGNAL

An item whose electrical output provides synthetic pitch and yaw signals similar to those produced by an accelerometer.

SIMULATOR-VERIFIER,COMPUTER

A single component with the dual function of providing synthetic signals which are fed into a computer, and of determining discrepancies between computed and independently derived solutions.

TEST KIT,RADAR

A collection of items, such as cables, dummy mixers, and matching networks, required for use with test instruments in making a limited number of tests on a radar receiver.

TEST SET,CONTROL

A test set specifically designed for use in making examinations of controls.

TEST SET,ELECTRONIC SYSTEMS

A test set specifically designed for use in making examinations and providing discrete evaluations of the over-all performance of a system(s) or subsystem(s). Excludes TEST SET (1), ANTENNA SYSTEM; TEST SET (1), FIRE CONTROL SYSTEM; TEST SET (1), FLIGHT CONTROL SYSTEM; and TEST SET (1), TELEMETERING SYSTEM.

TEST STAND,CONVERTER

An item, usually with a front working area, and including mechanical and electrical facilities for the accomodation of a component such as a data converter for test purposes. May also include mounting surfaces for associated test equipment. See also CONSOLE (as modified) and RACK (as modified).

TEST STAND,ELECTRIC AND HYDRAULIC SYSTEM COMPONENTS

A cabinetlike item usually with a front work area and consisting of the necessary instrumentation and mechanical and electrical facilities for component mounting. Designed to simultaneously test efficiency of packaged hydraulic pressure and electric power generating equipment. Component under test is equipped with self-contained power source. Excludes TEST STAND, HYDRAULIC SYSTEM COMPONENTS.

TEST STAND,HYDRAULIC PUMPING UNIT

A cabinetlike item with a front work area and consisting of the necessary instrumentation and facilities for testing a PUMPING UNIT, HYDRAULIC, (as modified). The item is not designed for mounting components under test. Excludes TEST STAND, HYDRAULIC SYSTEM COMPONENTS.

TEST STAND,RECEIVER

An item, usually with a front working area, and including mechanical and electrical facilities for the accommodation of a component such as a radar or radio receiver for test purposes. May also include mounting surfaces for associated test equipment. See also CONSOLE (as modified) and RACK (as modified).

TESTER,AIRCRAFT ACCELEROMETER

BASE,TEST SET CASE

An item of various shapes and material designed to form the bottom portion of a CASE (2), TEST SET. It is mounted to the case by means of bolts, clamps, latches, or the like.

TEST STAND,ELECTRIC,HYDRAULIC AND PNEUMATIC SYSTEM COMPONENTS

A cabinetlike item usually with a front work area and consisting of the necessary instrumentation, mechanical and electrical facilities for component mounting. Designed to test efficiency of packaged hydraulic and pneumatic pressure and electric power generating equipment. Component under test is equipped with self contained power source. Excludes TEST STAND, HYDRAULIC SYSTEM COMPONENT; TEST STAND, ELECTRIC; and HYDRAULIC SYSTEM COMPONENTS.

TEST SET,PNEUMATIC SYSTEM COMPONENTS

An item designed specifically for making examinations of pneumatic system components, such as valves, pressure regulators, accumulators, hose lines, pressure switches, and the like. May include facilities for checking pneumatic systems for leakage and performance. See also TEST SET, LEAKAGE, GUIDED MISSILE DRAINAGE EQUIPMENT.

CHILL BAR,AIRCRAFT ENGINE MAINTENANCE

A device used to dissipate heat in the welding area so as not to deform the airfoil during aircraft engine maintenance.

PLUG-IN UNIT,ELECTRICAL-ELECTRONIC TEST EQUIPMENT

An electronic subassembly designed to be plugged into one or more basic pieces of test equipment to extend the capabilities of the basic instrument. The basic instrument cannot function without one or more plug-in units (as required) in position.

REPAIR KIT,THERMAL INSULATION PIPE COVERING,AIRCRAFT

A repair kit used to repair the INSULATION PIPE COVERING, THERMAL, AIRCRAFT. It is generally contained in a case or other container.

BORESIGHT,ALIGNMENT ELECTRONIC SYSTEM

A grouping of items designed for making examinations of alignment measurements for information on aircraft weapons systems and navigation systems. The alignment information obtained is accurately measured, processed, displayed and/or recorded in some fashion. It consists of a laser transmitter, receiver/recorder, and a boresight processing unit, set-up fixtures, and associated cables.

CONTROL BOX,HYDRAULIC SYSTEM COMPONENTS TEST STAND

An enclosure which includes, mounts and electrical devices such as switch(es), connector(s), circuit card(s), and the like it. It is specifically designed to control a TEST STAND, HYDRAULIC SYSTEM COMPONENTS.

TOOL AND EQUIPMENT KIT,HYDRAULIC SYSTEM COMPONENTS TEST STAND

A group of items specifically designed to perform maintenance on a TEST STAND,HYDRAULIC SYSTEM COMPONENTS.

TOOL KIT,HYDRAULIC SYSTEM COMPONENTS TEST STAND

A group of items with special tools used in conjunction with a TEST STAND,HYDRAULIC SYSTEM COMPONENTS (11017).

TEST SET,HYDRAULIC SYSTEM COMPONENTS

An item or collection of items designed specifically for making examinations of hydraulic system components, such as valves, pressure regulators, accumulators, hose lines, pressure switches, and the like. May include favilities for checking hydraulic systems for leaks and performance. See also TEST SET, LEAKAGE, GUIDED MISSILE DRAINAGE EQUIPMENT, OR TEST SET, PNEUMATIC SYSTEM COMPONENTS.

ANALYZER,BALANCER AND VIBRATION

A portable instrument which performs critical test, such as propeller balance, in-flight engine monitoring, mils broadband, failure and trend prediction, reduction gearbox assembly break-in, on-wing engine diagnostics, torguemeter run-out, turbine seal break-in. May include interconnections, cabling, transducers, storage/carrying case and other related accessories. EXCLUDES: TEST EQUIPMENT, HELICOPTER ROTOR HEAD BALANCE AND BLADE TRACK RUN; BALANCING, MACHINE, DYNAMIC-STATIC, HORIZONTAL; BALANCING, WHEEL, NONELECTRIC; AND ANALYZER, SPECTRUM.

TUBE,OVERFLOW,OIL FILLING,AIRCRAFT

An item used to canalize in a pan oil overflowed during filling of aircraft elements like engine, air generator, gear box and the like.

TEST CAP,AIRCRAFT MAINTENANCE

An item or assembly that closes an existing opening during maintenance. It may include gasket(s), or clamps and may have provisions for drainage or bleeding pressurized lines. It protects an opening from foreign objects and dirt and enables testing procedures. Excludes CAP, FILLER, OPENING&#59; CAP, PIPE&#59; CAP, QUICK DISCONNECT&#59; CAP-PLUG, RADIATOR TESTING&#59; PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

ADAPTER,POLISHING,AIRCRAFT ENGINE COMPONENT

Accommodates the positioning arm of a polishing machine to fit the surface of an aircraft engine component with a contact surface conforming to the surface of the aircraft engine component to be polished. It consists of a mounting plate and a foot fabricated from an appropriate material. The mounting plate attaches to a polishing machine and the foot is specially ground to hold a PAD, POLISHING AND RUBBING. The polishing machine rotates the aircraft engine component and moves the pad to contact the surface to be polished. The polishing device may be directly mounted or be attached with a section of TAPE, FASTENER, HOOK.

MANIFOLD,TEST

A vessel that has multiple inlet or outlet ports for filling, draining, or measurement of temperature, pressure, flow rate, or other properties. It may be a component of a test set or stand, or replace end item component manifolds for test purposes. It may include fittings and gages or connections to associated test equipment. Excludes manifolds that are an original component of an end item other than maintenance or test equipment.

MASK SET,SHOT PEEN

A group of MASK, SHOTPEEN's that are required for maintenance of aircraft engines or other items requiring shot blasting as a part of regular maintenance.

ANALYZER,ENGINE

An instrument capable of performing two or more diagnostic tests on the exhaust, ignition, electrical, and the like, systems of a gasoline or diesel engine. Connecting and test cables may be included. See also METER, MULTIPLE SCALE and MULTIMETER.

COVER,ANTENNA,RADIO FREQUENCY TEST

An enclosure for an ANTENNA, used during the testing of an ANTENNA or ANTENNA GROUP. It has a radio frequency absorbing liner and radio frequency connecter(s) to monitoring device. For generalized items with no connectors see: ABSORBER, RADIO FREQUENCY RADIATION.

FIXTURE SET,MACHINING,AIRCRAFT ENGINE MAINTENANCE

A group of two or more FIXTURE (1), MACHINING AIRCRAFT MAINTENANCE. May include hardware such as adapters, gaskets, valves, clamps, cables and fittings.

VENTILATION SYSTEM,FUEL CELL,AIRCRAFT

Consists of a blower and breathing air supply, breathing masks, filters, and hoses. May also include, standby oxygen supply, adapters, netting, jacks, caps, and plugs. May have storage for all items necessary for the maintenance of CELL, FUEL, AIRCRAFT. This system replaces fuel vapor in the CELL, FUEL, AIRCRAFT with ambient air oxygen. It also provides breathing air for maintenance and inspection personnel. May be provided in a deployable container or trailer mounted.

FILLER AND BLEEDER,HYDRAULIC SYSTEM,HAND OPERATED

A combination of storage tank(s), filters, switches, gages, hoses, and fittings sufficient to service a hydraulic system. The power for moving the hydraulic fluid is provided by a hand pump. May include hose racks or reels, and related plugs, caps, tools and miscellaneous hardware.

FILLER AND BLEEDER,HYDRAULIC SYSTEM,POWER OPERATED

A combination of storage tank(s), filters, switches, gages, hoses, and fittings sufficient to service a hydraulic system. The power for moving the hydraulic fluid is provided by compressed air or mechanical pump. May include a compressor, motor, engine, pump, hose racks or reels, and related plugs, caps, tools and miscellaneous items.

CHILL BAR SET,AIRCRAFT ENGINE MAINTENANCE

A group of two or more CHILL BAR, AIRCRAFT ENGINE MAINTENANCE. May include hardware such as adapters, gaskets, clamps, cables and fittings.

TIRE INFLATOR,AIRCRAFT,AUTOMATIC

A collection of items assembled to safely inflate TIRE, PNEUMATIC, AIRCRAFT to required pressure. This item will include a safety cage for the tire, a source for the correct inflating gas, metering equipment, hoses, connectors, stand and electronic controls to insure correct inflation.

STAND,MAINTENANCE,AIRCRAFT COMPONENT

An aerospace ground equipment frame used for supporting off-aircraft subassemblies and subsystem components during and awaiting maintenance. May be multifunctional or capable of holding items in multiple position. Wheels, casters, or shock absorbing legs may be included. Use a more specific STAND name if available.

TEST SET,OPTICAL SENSOR,FIRE DETECTION SYSTEM

A test set specifically designed for making examinations of fire detector system optical sensors.

GUARD SET,SAFETY,COMPONET TESTING,AIRCRAFT

INC 67536 CANCELLED ON 050206~All Except USA A group of two or more GAURD, SAFETY, COMPONENT TESTING, AIRCRAFT having different characteristics.

BLANKET,COMPOSITE CURING

An item usually flexible designed to repair composite structures by curing (hot bonding). It has one or more electrical zones which allow it to apply uniform heat exactly where the area is being repaired. It may also have a sensor to control temperature in hazardous areas. It connects to a CONTROLLER,COMPOSITE REPAIR SET,AIRCRAFT.

THERMOREACTOR,PORTABLE

A heating device which uses a combustible gas to provide heat necessary to dry or polymerize paints, varnished, lacquers, composites, and the like. If mounted on a vehicle, use "THERMOREACTOR, TRUCK MOUNTED". For items including an enclosure, use "OVEN, THERMAL DRYING, GAS BURNING.

TEMPLATE SET,CONTROL RIGGING,AIRCRAFT

A group of two or more TEMPLATE, CONTROL RIGGING, AIRCRAFT having different characteristics.

CONSOLE,INTERFACE TEST UNIT

A console that provides digital test set interface for operational support and control. It may contain mounting for power, low frequency feed modules, switching connector assemblies and interface connector modules. Excludes: TEST SET, INTERFACE

CONSOLE,TEST CONTROL

A console designed to test and control high power functions. It may include test set computer, disk drive devices and data communication links. Excludes: CONSOLE, POWER DISTRIBUTION

CONSOLE,RADIO FREQUENCY

A console unit that provides RF stimulus and measurement capabilities. May include RF synthesizers, modular spectrum analyzer, microwave transition analyzer, power meters, RF interface module and spread spectrum modulator. Excludes: MEASURING SET, FIELD STRENGTH, RADIO

CONSOLE,LIQUID COOLING

A console which absorbs generated heat which is carried through a liquid cooling system. The item may contain test flow rate ports, sensors to monitor temperature and pressure.

CONSOLE,INSTRUMENTATION

A console that performs control and monitoring fot all instrumentation. Also, may contain system timing, wave form digitzing, communications bus interface and power supply.

SUPPORT PLATFORM,JACK

An item, usually square in shape, made of various materials and designed to be placed under a SHOE, JACK-SUPPORT or the like, providing additional support and helping to prevent the SHOE, JACK-SUPPORT from sinking into the ground or surface upon which it is placed. A handle(s) may be included on item to aid in carrying and placement. Excludes: SHOE, JACK.

TEST SET,CALIBRATION,ATTITUDE AND HEADING

A set of components used to determine the accuracy of calibration of an ATTITUDE AND HEADING REFERENCE UNIT that provides measurements of the aircraft pitch, roll, heading and Euler angles for use by the flight deck displays, flight control system, flight management system and other avionics equipment.

REFILL KIT,AIRCRAFT COMPOSITE REPAIR SET CONTROLLER

A refill kit designed for a CONTROLLER, COMPOSITE REPAIR SET, AIRCRAFT. It consists of one or more paper rolls, inking ribbons, and the like. It may include one or more fuses, and the like.

DUMMY INSTRUMENT,AIRCRAFT

An item designed to be mounted on an aircraft in place of the real instrument such as a display unit, radio set, altimeter and the like to test the connecting wire and the location on board. It conforms to the outside configuration of this instrument without the electric or electronic systems.

FLANGE,HOSE REEL DRUM

An item usually flat and circular which is mounted on the two sides of a DRUM, HOSE REEL to constitute a REEL ASSEMBLY, HOSE. Excludes FLANGE, REEL, CABLE.

LID,TEST SET CASE

An item of various shapes and material designed to enclose the top portion of a CASE (2), TEST SET. It is mounted to the case by means of bolts, clamps, latches, or the like.

TEST SET,PRECIPITATION STATIC DIAGNOSTIC

A device used to test aircraft and associated test objects for precipitation static electromagnetic interference (EMI). It induces a localized, high voltage static charge onto the outer skin of the aircraft (or other test article) to simulate actual atmospheric precipitation static conditions that may occur when flying through harsh changing weather conditions such as ice, snow, sleet, cloud and sand storms. Excludes TESTER, PITOT AND STATIC SYSTEMS.

TEST SET,MULTI SYSTEM,AIRCRAFT

An all purpose box having multiple test connectors and electrical test points that tests multiple aircraft systems. Various hook-ups allow additional systems to be diagnosed and tested by adding alignment fixtures, cable assembliers, probes and cards. It may be used to test the rigging, throttle location on the engine throttle handle linkage, and with the addition of other test boxes, the radar receiver's antennas.

INSTALLATION AND REMOVAL TOOL,PANEL FASTENER

An item specifically designed to assist in attaching and detaching components of panel fasteners such as studs, grommet assemblies, and the like, without damaging adjacent structures.

STAND,MAINTENANCE,AIRCRAFT LANDING GEAR

A frame designed to support a LANDING GEAR (as modified) during maintenance operation.

SHOP EQUIPMENT,UNMANNED AIRCRAFT,TRUCK MOUNTED

Shop equipment used in the preparation and maintenance of a DRONE,AIRCRAFT or UNMANNED AERIAL VEHICLE on the ground. It is used to perform preflight check and is also used for maintenance on the ground. It may be equipped with a weather station, an emergency recovery system, means to execute test, and the like. It is generally installed in a shelter or it may be containerized and it may also include electrical power supply facilities.

DIE,PANEL FASTENER INSTALLATION AND REMOVAL TOOL

A device in particular sizes and shapes, designed to be held in an INSTALLATION AND REMOVAL TOOL,PANEL FASTENER (68270) or other manual or powered tool that installs and/or removes panel fasteners.

TEST SET,MAGAZINE-LOADER,COUNTERMEASURES DISPENSER

A test set primarily designed for use in making examinations of a MAGAZINE, DISPENSER (as modified) or a LOADER,CHAFF DISPENSER,AIRCRAFT. It may includea control unit, one or more test units, adapters, cables, a shipping container, and the like. Excludes TEST SET,COUNTERMEASURES DISPENSING SET.

TEST SET,COMMON AIRCRAFT ARMAMENT

A collection of items, such as a laptop computer, power supply, and a measurement unit. It is used to troubleshoot aircraft electrical and pneumatic systems for bomb racks, launchers, associated adapters, and the like.

TOOL KIT,COUNTERMEASURES SET TEST SET

A special tool kit used in conjunction with a TEST SET, COUNTERMEASURES SET. It alows dissambly, interface, and the like, of countermeasures set to facilitate the use of a TEST SET, COUNTERMEASURES SET.

MISSION EQUIPMENT SUPPORT SET,TESTER

A group of items used to reconfigure the main Automatic Test Station to meet the testing requirements of a unit during testing. It may include hardware and/or test equipment that can be installed, integrated with, or removed from the Automatic Test Station as required.

COMPUTER,SPECIAL PURPOSE

One or more computers which may or may not have one or more associated software designed to perform one or more specific tasks. For a computer not designed for a specific task, see COMPUTER DIGITAL. Do not use if a more specific name applies.

STAND,MAINTENANCE,AIRCRAFT ENGINE-EMPENNAGE

A stand that is designed to safely hold an empennage/tail assembly or a propulsion jet engine. This item can be used for such purposes as ground support and maintenance activities on manned or unmanned aircraft. For stands designed for engines only, see STAND,MAINTENANCE,AIRCRAFT ENGINE.

TEST CAP SET,AIRCRAFT MAINTENANCE

A group of several TEST CAP,AIRCRAFT MAINTENANCE (66913) with different characteristics.

CASE,ASSESSORY SET,ELECTRICAL

The case is cushioned and fitted to protect contents. Excludes CASE, (2) CASE,TOOL AND ACCESSORIES.

ADAPTER,SPARK PLUG TESTER

An interchangeable adapter designed to accommodate various types of spark plugs in a TESTER, SPARK PLUG.

HONING MACHINE,VERTICAL

HONING MACHINE,HORIZONTAL

JACK,DOLLY TYPE,MECHANICAL

TEST SET,GENERATOR AND VOLTAGE REGULATOR,AUTOMOTIVE

A test set primarily designed for use in making examinations of low-voltage automotive generators and voltage and current regulators.

TEST SET,IGNITION COIL

A test set primarily designed for use in making examinations of ignition coils.

TOWBAR,MOTOR VEHICLE

TESTER,STARTER TORQUE

A device designed to measure and indicate the torque developed by an engine starter.

TESTER,CYLINDER COMPRESSION

A device designed for testing the compression of engine cylinders.

TESTER,PRESSURE EQUALIZER,HYDRAULIC BRAKE

A device designed for testing the pressure of hydraulic brakes.

RELINER,BRAKE AND CLUTCH

A device combining drilling, countersinking, riveting, and usually grinding facilities. It is designed to accomplish the operations necessary for delining and relining clutch plates and/or shoe-type brakes.

AUTOMOTIVE REPAIR SHOP,TRUCK MOUNTED

INC 05774 REINSTATED ON 060217~(All Except USA)

LIFT,MOTOR VEHICLE

A power-operated device consisting essentially of a vertically movable supporting structure for elevating motor vehicles to a height convenient for maintenance operations.

LIGHT,IGNITION TIMING

A neon lamp type indicator designed to show the interval of electrical impulses from the distributor or magneto to individual spark plugs of a gasoline engine.

GRINDING MACHINE,BRAKE LINING

A motor driven device used to smooth and size shoe mounted brake linings by means of abrasive action.

SCREEN,HEADLIGHT BEAM ADJUSTMENT

A flat, rectangular surface, with vertical and horizontal reference lines, on which fixed headlight beams are projected to determine whether they are correctly aimed.

DETECTOR,ENGINE BEARING OIL LEAK

A device consisting essentially of a tank, tubing, and fittings necessary to force oil through the lubricating system of an engine at a uniform, predetermined pressure, enabling an observer to locate faulty bearing points by noting the rate of leakage therefrom.

RIM,CURING,TIRE MOLD,VULCANIZER

A metal rim that conforms to the bead contour of pneumatic tires and supports the tube and/or tire when used with tire rebuilding equipment.

VULCANIZING MOLD,TIRE

A metal form in which pneumatic tire casings are partially or entirely inclosed and subjected to pressure and heat for the shaping and curing of retreads and/or repair sections.

ANALYZER,GASOLINE ENGINE EXHAUST

An instrument designed to indicate the efficiency of gasoline engine carburetion by determining the air-fuel ratio and/or the completeness of combustion.

BUFFING MACHINE,TIRE TREAD

A power-driven machine employing a rotating wheel rasp for smoothing and surfacing the tread areas of rubber tires.

ROLLER,TIRE TREAD

A hand- or power-operated roller used for applying pressure to remove air pockets in the application of tread stock or rubber composition material to tire casing, to obtain solid adhesion within the repair.

TESTER,ENGINE DISTRIBUTOR

An indicating device designed primarily for checking performance of gasoline engine distributors.

INDICATOR,WHEEL ALIGNMENT

A composite group of gages and attachments, with or without runway facilities, designed to measure the degree of caster, camber, kingpin angle, toe-in and/or turning radius of automotive vehicle wheels.

BALANCER,VEHICLE WHEEL

An instrument that indicates amount and position of unbalance in vehicle wheels.

BORING MACHINE,CONNECTING ROD

BORING MACHINE,ENGINE CYLINDER

TEST STAND,IGNITION MAGNETO

A device designed for testing the electrical output and operating characteristics of a MAGNETO, IGNITION.

CREEPER,MECHANIC'S

A low, caster-mounted platform designed to support and facilitate movements of personnel engaged in maintenance operations underneath motor vehicles.

GRINDING MACHINE,CRANKSHAFT

SPREADER,TIRE

A device for opening and holding pneumatic tire casings during interior inspection and/or repair.

STRAIGHTENER,MOTOR VEHICLE FRAME

A group of related components used in the detection and correction of distortion in motor vehicle frames.

TESTER,SPEEDOMETER

A power driven device for checking accuracy of automotive type speedometers by comparing their performance with a master speedometer of known accuracy.

VULCANIZER,HOT PATCH

A clamp-type device designed for application of self-bonding patches and/or valve stem units in the repair of inner tubes or similar items.

CLUTCH REBUILDER,MOTOR VEHICLE

A fixture for holding disk-type automotive clutch assemblies for adjustment, testing and/or repair.

VULCANIZER,PLATE,INNER TUBE

A stationary device consisting of a clamping fixture and permanent heating unit used for bonding rubber repair sections to pneumatic tubes.

VULCANIZER,SPOT PRESS,TIRE AND TUBE

A stationary device consisting of a clamping fixture and permanent heating unit used for bonding rubber repair sections to pneumatic tires and tubes. It may include additional equipment such as sandbags, tire contour plates, and the like.

STAND,MAINTENANCE,AUTOMOTIVE AXLE

STAND,MAINTENANCE,AUTOMOTIVE CRANKSHAFT

STAND,MAINTENANCE,AUTOMOTIVE ENGINE

CLEANER AND TESTER,SPARK PLUG

A device for removing foreign matter from the electrode end of a spark plug by abrasive blast action and/or for determining the serviceability of a spark plug by observing its performance under simulated engine combustion pressures and voltages or under varied voltage conditions only.

TESTER,SPARK PLUG

CASE,TEST SET

GAGE,TIRE PRESSURE,SELF-CONTAINED

An instrument designed primarily to indicate air pressure in pneumatic tires, without the aid of additional air pressure. May also be designed for the precision checking of the accuracy of other tire pressure gages.

LATHE,BRAKE DRUM

CLEANER,SPARK PLUG

A device designed for removing foreign matter from the electrode end of a spark plug by abrasive blast action.

TUBE,BLEEDER,HYDRAULIC BRAKE

A flexible tube usually having threaded metal fittings on one or both ends, used for bleeding air from and/or draining or flushing hydraulic brake systems.

DEMOUNTER,PNEUMATIC TIRE

A hydraulically and/or manually operated device employed to force a pneumatic tire from its rim by means of pulling action applied to the rim and pushing action applied simultaneously at several points on the bead periphery of the tire. See also BEAD BREAKER, PNEUMATIC TIRE.

STRAIGHTENER,MOTOR VEHICLE AXLE AND HOUSING

A device whose basic assembly is primarily designed for holding axles, axle housings, and drive shaft housings between adjustable centers while being brought into the desired degree of alignment by the application of pressure supplied by a hand jack. It may also be used to perform other functions such as removing and replacing sleeves in housings or removing gears from shafts.

GRINDING MACHINE,VALVE FACE

A grinding machine designed to reface internal combustion engine valves. It may be equipped to perform other related operations such as grinding valve ends, tappets, and rocker arms.

PISTON EXPANDING MACHINE

A machine designed primarily to resize and reshape collapsed and/or worn automotive type engine pistons by applying controllable impact forces to the inside surface of the piston skirt.

CLAMP,WHEEL CYLINDER,HYDRAULIC BRAKE

A device for positioning on a hydraulic brake wheel cylinder to prevent the piston from leaving the cylinder during assembly or disassembly of brake.

TESTER,BRAKE,MOTOR VEHICLE

A floor mounted testing unit consisting of four skid proof runways, each placed to accommodate a wheel of the vehicle being tested, complete with a recording mechanism for measuring the braking energy of the vehicle and indicating whether brakes are unequal or too weak.

INDICATOR,CONNECTING ROD ALIGNMENT

A device for determining the existence of bend, twist, and/or offset distortions in connecting rods of internal combustion engines, compressors, and the like.

GRINDING MACHINE,CYLINDER HEAD

A power operated grinder, primarily designed to resurface cylinder heads, manifolds and engine block tops. The work, and not the table, is manually or automatically passed back and forth over a horizontal, cupped-type, abrasive wheel, mounted in the working surface.

GRINDING MACHINE,PISTON

A machine designed for round and/or cam grinding of automotive type pistons. May include a turning device for rapid stock removal.

TESTER,DIESEL FUEL INJECTOR NOZZLE

A manually operated test unit designed to check diesel fuel injector nozzles and holders for operation, opening pressure, and spray pattern.

BORING MACHINE,CAM AND MAIN BEARING

A fixed or portable machine consisting essentially of a steel boring bar with required equipment designed to bore engine crankshaft main and/or camshaft bearings to a predetermined accuracy of inside diameter, linearity, and concentricity.

TESTER,HEADLIGHT BEAM

A device essentially consisting of a light tunnel equipped with a reducing lens and transparent diagrammatic screen upon which a pattern is reproduced to test the lateral aim and elevation of a headlight beam, and a photoelectric cell andmeter to measure the luminous intensity. Mounting standard with wheels or track and rollers may be included.

MOUNTER AND DEMOUNTER,PNEUMATIC TIRE

A manually operated device employed to loosen the bead, demount and/or mount pneumatic tires for various size wheels.

TEST STAND,OIL TEMPERATURE CONTROL VALVE

A device designed to test the performance and operating characteristics of engine oil temperature control valves, at simulated actual operating conditions.

MAINTENANCE FIXTURE,AUTOMOTIVE ENGINE ACCESSORY

A device for temporarily supporting and holding carburetors, fuel pumps, distributors, and similar items in the correct position during assembly, disassembly, repair and/or testing. Excludes STAND (as modified) and VISE (as modified). See also HOLDER, MAINTENANCE FIXTURE, MULTIPOSITION.

TESTER,FUEL INJECTOR PUMP

A power driven mechanical device primarily designed for testing the flow and delivery rate of fuel injector pumps. Excludes TESTING EQUIPMENT, FUEL INJECTION.

TEST STAND,HYDRAULIC SYSTEM COMPONENTS

A cabinetlike item usually with a front work area and consisting of the necessary instrumentation, integral hydraulic system and component mounting facilities. Designed to provide the hydraulic pressure for testing and/or calibrating hydraulic system components, such as valves, actuating cylinders, pressure regulators, accumulators, hose lines, hand and/or engine driven pumps and the like. May include facilities for filling and checking hydraulic systems for leakage and performance. See also PUMPING UNIT, HYDRAULIC.

PILOT,VALVE SEAT REFACING

A device which, when inserted into the bore of a valve guide on an internal combustion engine, serves as a center post for aligning and guiding the grinding stone and/or reamer of a valve seat refacer.

INFLATOR-GAGE,PNEUMATIC TIRE

An item consisting essentially of a pneumatic tire pressure gage with an attached length of hose equipped with device for supplying compressed air to a tire valve stem. In service the item is connected to an air supply hose.

TESTER,INTERNAL COMBUSTION ENGINE

A device consisting of two or more gages or indicators mounted in a single unit, and capable of determining two or more different mechanical performance characteristics of an internal combustion engine, or its component systems, while functioning under engine operating conditions, by making either a single or a multiple test in order to determine one or more engine characteristics similar to the following: cylinder compression, engine oil pressure, carburator adjustment, manifold vacuum, fuel pump pressure, and the like. It does not include permanently installed gages, or any devices designed to test electrical components or characteristics of an engine. See also TESTER, IGNITION SYSTEM, ENGINE.

TIRE FORM,SECTIONAL REPAIR

An arc shaped form for use inside a tire to position the tire while preparing it for sectional repair. It is designed to be mounted on a bracket. May include one or more forms.

PLUG,RADIATOR TEST

A cylindrical or ball-shaped item fabricated of solid rubber, having a hole running through its center through which a threaded stem is inserted. A wing nut, two washers and the stem are supplied to apply pressure, thereby expanding the ball and plugging up inlet and outlet opening in radiators. It is used to locate leaks in the core or tank of a radiator and the like.

HOIST,TIRE

A device primarily designed for lifting pneumatic tires to facilitate inspection and/or repair of the tire with the use of a tire spreader. It is also commonly used for lifting tires in and out of molds, placing mounted tires on a wheel balancer spindle, and other general tire shop use. May be portable or stationary. Excludes SPREADER, TIRE.

BUFFER,INNER TUBE REPAIR

A tool designed to roughen the surface area immediately surrounding a puncture or other small hole in an inner tube, in preparation for the application of a rubber patch.

ADAPTER SET,ENGINE ELECTRICAL TEST

A group of adapters designed to permit electrical test connections to 24 volt waterproof electrical systems used on military equipment for making generator-regulator tests, coil tests, distributor tests, and voltage tests. It may also contain adapters to permit engine rpm tests and engine timing checks.

ANALYZER SET,ENGINE

A complete multiple test unit designed for use in the testing of exhaust, ignition, voltage, revolutions per minute, etc., of a gasoline or diesel engine. Excludes ANALYZER, IGNITION AND VIBRATION, RECIPROCATING ENGINE.

RADIATOR REPAIR KIT

TESTING EQUIPMENT,FUEL INJECTION

Excludes TESTER, FUEL INJECTOR PUMP.

ALIGNMENT SERVICE UNIT,MOTOR VEHICLE

A group of related components primarily designed for and used in the detection and correction of distortion of chassis for automotive rolling equipment. Consists of STRAIGHTENER, MOTOR VEHICLE FRAME, and at least one of the following: wheel balancer, front end alignment equipment, and/or axle housing straightening equipment.

PLUG SET,RADIATOR TEST

TEST STAND,AUTOMOTIVE GENERATOR AND STARTER

A unit equipped with the necessary instruments and fixtures for testing starting motors, generators, and related units.

TRUCK,LIFT,WHEEL

A hand propelled, wheeled vehicle equipped with hydraulic or mechanical lifting device used in installation, removal, and transportation of wheels for aircraft, buses, trucks, and the like.

DRIVER,VALVE SEAT GRINDING,ELECTRIC

An electric powered hand-held rotary tool designed for engaging accessories when grinding valve seats. It contains no accessories. See also GRINDING KIT, VALVE SEAT, ELECTRIC.

GRINDING KIT,VALVE SEAT,ELECTRIC

An item consisting of a DRIVER, VALVE SEAT GRINDING, ELECTRIC and accessories. Excludes GRINDING MACHINE, VALVE SEAT, ELECTRIC.

TANK,TESTING,RADIATOR AND FUEL TANK

An open top receptacle in which automotive radiators, fuel tanks, and the like are submerged for the visible detection of leaks.

PAN,DRAIN

A shallow metallic or non-metallic receptacle, equipped with baffle and wire cloth primarily designed to receive engine oil and the like, draining from automotive vehicles. Excludes oil drip pans.

STAND,RADIATOR TEST AND REPAIR

A benchlike device, consisting of an integral water tank, electrically powered elevator, tool shelf, air and gas manifold(s), and necessary equipment for testing and/or repairing vehicle radiators.

DYNAMOMETER,RUN-IN

A mechanical device used for running-in new and rebuilt internal combustion engines under load prior to their applicable installation by simulating actual load conditions and applying them to the engines. It employs a closed hydraulic turbine torque absorption system, and includes a tachometer, intake manifold vacuum gage, temperature gage, and indicator plate for valve operation. Excludes DYNAMOMETER, VEHICLE CHASSIS, SINGLE DRIVE.

RELINER SET,BRAKE SHOE BONDING

A set of stationary, manually operated devices consisting principally of clamping fixtures and permanently installed electric heating units. It is used to bond or debond brake linings on automobile, motor truck, and the like, shoe type brakes by the application of heat. See also RELINER, BRAKE AND CLUTCH.

TABLE,WORK,AUTOMOTIVE MAINTENANCE

JACK,DOLLY TYPE,HYDRAULIC

A lifting device consisting of a ram actuated by a hydraulic pump, mounted on a base which has casters or the like for mobility. Excludes JACK, HYDRAULIC, HAND and JACK, HYDRAULIC, TRIPOD.

REEL AND HOSE ASSEMBLY,COMPRESSED AIR DISPENSING

A device primarily designed to supply compressed air for pneumatic tire inner tube inflation. It usually consists of a mechanical spring or compressed air actuated reel for retracting the manually extended hose. The hose is usually equipped with a tire and tube inflator on discharge end. It may be used for air dusting by substituting air dusting gun for the tire and tube inflator.

REEL AND HOSE ASSEMBLY,WATER DISPENSING

A device primarily designed to supply automobiles, buses, motor trucks, and the like with water. It usually consists of mechanical spring or compressed air actuated reel for retracting the manually extended hose. The hose is equipped with a discharge control valve on service end.

GROOVING MACHINE,TIRE TREAD

A device primarily designed to cut longitudinal and/or transverse grooves and/or slits in automobile, motor truck, and the like, tires (usually worn) for the purpose of minimizing skidding by increasing traction.

PLATFORM,VEHICLE LUBRICATING

A metal and/or wood structure, for use in the field, consisting primarily of two parallel wheel accommodating surfaces which provide a ramp and horizontal runway. It may be used for other maintenance operations.

GUARD,SAFETY,TIRE INFLATION

A cage type enclosure, consisting of frame members welded to a base plate, for inclosing a large size tire and rim assembly during inflation of the tire. It is designed for the protection of personnel in the event of a blowout.

HOLDER,MAINTENANCE FIXTURE,MULTIPOSITION

A device having a stationary or adjustable base with movable arm(s) for affixing maintenance fixtures to hold items in convenient working positions. It is commonly used for benchwork and may be free standing. For items which include maintenance fixtures, see MAINTENANCE FIXTURE (as modified).

JACK,DOLLY TYPE,PNEUMATIC

CONSTRICTOR,BEAD EXPANDING,PNEUMATIC TIRE

A device used to apply pressure about the tread circumference of a tubeless pneumatic tire, causing the tire beads to expand against the wheel rim to form an airtight seal. It consists of either an air, hydraulic, screw, or friction force contracted band, or of a confined, inflatable, circular tube, inside which the tire is placed for application of pressure.

CUTTER BIT,BORING MACHINE,CONNECTING ROD

CUTTER BIT,BORING MACHINE,ENGINE CYLINDER

STAND,VALVE REMOVING AND INSTALLING,CYLINDER ASSEMBLY

A cylindrical shaped post, rounded on top, mounted on a flat base, usually square and usually made of wood. Used to hold an engine cylinder assembly while the valves are being removed or installed.

GRINDING MACHINE,VALVE SEAT,ELECTRIC

A motor driven grinding machine that utilizes an abrasive wheel, designed for precision grinding and refinishing of internal combustion engine valve seats. It consists essentially of a base, upright and grinding supports, work holder, electric motor(s), spindle(s), grinding head(s), gage(s), and any necessary accessories such as diamond dressers and abrasive wheel sets. It usually has a coolant system for wet grinding and it may be portable (disassembled in container base) for ease of transportation. Excludes GRINDING KIT, VALVE SEAT, ELECTRIC.

DYNAMOMETER,VEHICLE CHASSIS,SINGLE DRIVE

A mechanical device used to test motor vehicle performance by placing the vehicle's driving wheels on drive rollers and simulating actual driving load conditions. Consists of all, or part of the following components: instrument cabinet, chassis, engine cooling system, and auxiliary idler rolls. Excludes DYNAMOMETER, RUN-IN.

RASP,BUFFING,TIRE TREAD

A rotating tool used for removing rubber from the tread area in preparation to recapping and repairing automotive pneumatic tires. It may have such mounting facilities as a threaded hole or an arbor hole for application on flexible shaft or arbor mounted machines. Tools may be solid steel with integral teeth in rows forming a spiral from the top to the bottom, or disk shaped hubs constructed to accommodate removable teeth segments, or tack inserted bands.

GUN,FLUSHING,RADIATOR AND ENGINE BLOCK

A gun type flushing and reverse flushing device utilizing compressed air and water. For use on motor vehicle radiators and engine blocks. See also CLEANING AND FLUSHING MACHINE, AUTOMOTIVE COOLING SYSTEM.

BEAD BREAKER,PNEUMATIC TIRE

A hand-operated leverage device designed to loosen tire beads from a wheel rim for tire removal. It consists of a base-mounted upright which serves as a fulcrum for an attached lever arm from which a leg with a shoe is suspended. When the wheel and tire assembly is positioned flat on the base with the shoe against the upper side of the tire at the rim, downward pressure on the lever arm forces the tire bead to break away from the wheel rim. See also DEMOUNTER, PNEUMATIC TIRE.

LIFT,TRANSMISSION AND DIFFERENTIAL

A caster mounted device designed primarily for removing and/or replacing automotive vehicle transmissions and differentials. It may be of the type designed for use with vechicle elevated on LIFT, MOTOR VEHICLE or of the type designed for use with vehicle standing on floor.

ADAPTER,PULLEY,TEST STAND

A cylindrical shaped metallic item used as a means to adapt the driving pulley to the various sizes of shafts of generators being tested on TEST STAND, AUTOMOTIVE GENERATOR AND STARTER. The item must have a means for securing to the shaft, such as a setscrew(s), keyway(s), or the like. See also BUSHING, SLEEVE.

ADAPTER,CYLINDER COMPRESSION TESTER

An item used to adapt the stem of a TESTER, CYLINDER COMPRESSION to various size automotive spark plug ports. It may be a threaded type to fit a designated spark plug port or a universal type designed to accommodate a range of sizes. It may be fastened to the tester stem by means of a quick change or threaded connector.

ADAPTER,SPARK PLUG CLEANER

A moulded item usually of rubber designed to accommodate a designated size spark plug in a CLEANER, SPARK PLUG. Excludes ADAPTER, SPARK PLUG TESTER.

LINK,HOISTING

A rigid item which is less than three times as long as it is high. It includes an eye(s), ring(s), hole(s), loop(s), or the like, to facilitate hoisting and is designed to permit attaching such items as sling legs, shackles, rods, and hooks at two or more points. May include mounting hardware such as bolts, screw, washers and the like. Excludes SPREADER, SLING. See also BEAM, HOISTING. Do not use if a more specific name applies, such as RING, CONNECTING, ROUND and LINK, CHAIN, END.

CONE,CENTERING,BRAKE DRUM

A conical shaped item (actually a frustum of a cone) with either a stepped, tapered (cone) or spool (one end must be smaller than the other) shaped silhouette between ends, used for aligning a brake drum, on a brake drum lathe, during the turning and/or grinding process. It may fasten to the drum with studs when the drum is without a center bearing.

INDICATOR,PISTON POSITION,IGNITION TIMING

An item used for indicating crankshaft angle with relation to top dead center for ignition and valve timing purposes and synchronizing timing of dual ignition systems. Usually consists of a body, head, pivot arms and scales, test lead wires, and a case. Excludes INDICATOR, SCALE.

TEST SET,TACHOMETER-DWELL

A set of one or more instruments, used for measuring the distributor cam dwell on internal combustion engines employing battery distributor ignition systems, and as a tachometer to measure the revolutions per minute of both battery distributor and magneto ignition system type engines. Excludes TACHOMETER, ELECTRONIC; TACHOMETER, STROBOSCOPIC; TACHOMETER, ELECTRIC, NONSELF-GENERATING and TACHOMETER, VIBRATING REED.

SCALE,FITTING,INTERNAL COMBUSTION ENGINE PISTON

An instrument used to fit pistons in rebored internal combustion engine blocks by checking the clearance between the thrust side of the piston skirt and the cylinder wall.

TANK,TESTING,TIRE AND TUBE

A water-filled tank in which pneumatic tire inner tubes and wheel mounted or rim mounted tubeless tires are submerged, either manually or mechanically, for the visual detection of air leaks.

LEVEL,TEST STAND

A device which utilizes a VIAL, LEVEL. It is used for leveling, adjusting and setting angles for test stand of which it is a component part.

TEST SET,DIESEL INJECTOR

A fixture or group of fixtures specifically designed to test the serviceability of injectors for various types of diesel fuel engines. It may have provisions for testing individual components of the injectors and may include hand tools and equipment to perform limited maintenance operations. Excludes TOOL KIT (1), DIESEL INJECTOR.

MAINTENANCE FIXTURE,RADIATOR

An item consisting of a lifting device and a holding fixture, having a means of multiposition. It is designed to lift, hold, and temporarily support a core radiator in the correct position during repair and/or testing. Excludes MAINTENANCE FIXTURE, AUTOMOTIVE ENGINE ACCESSORY.

COVER,PROTECTIVE,VEHICLE FENDER

A piece of material, such as cloth, paper, or the like, used to protect a vehicle fender from becoming soiled or scratched during maintenance repair operations on the vehicle.

HOISTING UNIT,TRUCK MOUNTING

A group of items consisting of a chain hoist, towbar, and a hoist superstructure designed for mounting on a truck used for maintenance operations to pick up and/or tow vehicles. It may include mounting accessories.

TRAILER,LIFT,WHEEL

A trailer equipped with hydraulic or mechanical lifting devices used in installation, removal, and transportation of wheels for aircraft, buses, trucks, and the like.

HONING MACHINE,AUTOMOTIVE CYLINDER

A motor driven automatic machine that is used for honing or resizing automotive engine cylinder bores.

GRINDING MACHINE,CLUTCH PLATE-FLYWHEEL

A grinding machine specifically designed to recondition worn automotive clutch plates and flywheels. Excludes GRINDING MACHINE, SURFACE, ROTARY.

STAND,MAINTENANCE,ARMORED VEHICLE TURRET

A metallic structure designed to support and hold armored vehicle turret(s) during overhauling and maintenance operations.

SHOP EQUIPMENT,AUTOMOTIVE VEHICLE

A group of items consisting of tools, accessories, and equipment, such as brake drum lathe, tire demounter, brake and clutch reliner, transmission and differential lift, vulcanizer, and the like, required for complete automotive rebuild, maintenance and repair operations. See also SHOP EQUIPMENT (1), INTERNAL COMBUSTION ENGINE.

SHOP EQUIPMENT,INTERNAL COMBUSTION ENGINE

SHOP EQUIPMENT,MOTOR VEHICLE ASSEMBLING

SHOP EQUIPMENT,RADIATOR

PARTS KIT,HYDRAULIC JACK

PARTS KIT,WHEEL BALANCER

ANALYZER SET,VEHICULAR

A self-contained portable test set designed for use in the automated testing of a complete vehicle, including all basic electrical, mechanical, and hydraulic subsystems. The set may be reprogrammable. Excludes-ANALYZER, IGNITION and VIBRATION, RECIPROCATING ENGINE and ANALYZER SET, ENGINE.

STAND,VEHICLE SUPPORT

A metallic structure designed for use in pairs to be placed under the chassis of an automotive vehicle as stablizing safety devices when the vehicle is in a raised position. The base may be of various cross-sectional shapes with a center, usually rack-and-pawl type, central column having a saddle head and designed for height adjustment.

TOOL KIT,CYLINDER COMPRESSION TESTER

A group of items with special tools used in conjunction with TEST, CYLINDER COMPRESSION.

STAND ASSEMBLY,LIFTING AND BLOCKING,VEHICULAR

FIXTURE ASSEMBLY,TURBOCHARGER

ADAPTER,BLEEDER,MASTER CYLINDER

An item specifically designed to be applied to the master cylinder for bleeding the complete brake system.

CALIBRATION KIT,FUEL INJECTOR

COVER,OVERHAUL STAND

WELDMENT ASSEMBLY,OVERHAUL STAND

GUIDE,HOSE REEL

COMPARATOR,INJECTOR,TEST STAND

MODIFICATION KIT,MAINTENANCE AND REPAIR SHOP EQUIPMENT

An item or items employed to modify specially designed maintenance or repair shop equipments.

BRAKE PAD ASSEMBLY,ENGINE STAND

MAINTENANCE KIT,VEHICULAR

A maintenance kit for components of ground or tracked vehicles.

DISCHARGE HEAD,INJECTOR CALIBRATOR

A separate component item of an injector calibrator, designed to accommodate specific engine injectors, so the calibrator can receive the injector output, smooth and route it to the succeeding component to meet test requirements.

FIXTURE,VEHICULAR MAINTENANCE

A fixture designed to be attached to vehicular components, such as engines, generators and the like to facilitate inspection, repair, and/or replacement of components.

STAND,MAINTENANCE,AUTOMOTIVE TRANSMISSION

BLADE,GROOVING MACHINE,TIRE TREAD

An item used in conjunction with a GROOVING MACHINE, TIRE TREAD and designed for cutting treads on new smooth-tread tires and also for regrooving original treads.

ADAPTER,BALANCER,VEHICULAR WHEEL

An item used both for centering and mounting a wheel on a BALANCER, VEHICULAR WHEEL.

POWER PUSHER,VEHICLE

A self propelled two-wheeled vehicle designed to assist in pushing/pulling of disabled wheeled vehicles.

ALIGNMENT FIXTURE,FINAL DRIVE ASSEMBLY

A fixture designed specifically to align and/or position interfacing components of a vehicular final dirve assembly, such as a gear box transmission or a drive shaft.

HOLDING FIXTURE,SLIDER SHOE,CLUTCH

A specially designed metallic item designed to maintain proper postioning of clutch slider shoe assembly during removal and assembly operations.

WASHER,AUTOMATIC,VEHICLE

A power-driven unit consisting of various configurations of brushes and/or scrubbers, and soap and water application systems. Designed to automatically remove dirt from the exterior of automotive vehicle bodies. May include facilities for dispensing wax or drying air.

RING CENTERING TOOL,COIL,MAGNETO

A circular shaped item of solid cross-section designed to ensure proper spacing between COIL, MAGNETO and flywheel of small gasoline powered engines during maintenance and assembly operations.

ACCESSORY KIT,TEST SET

An accessory kit containing two or more supplemental items, such as attentuators, dummy loads, BRIDGE, IMPEDANCE, isolation transformers, and the like which are necessary to perform test and/or perform maintenance procedures on a piece of equipment or a system in conjunction with a TEST SET, (as modified).

INSTALLATION KIT,SHOP EQUIPMENT

An installation kit to adapt a SHOP EQUIPMENT (as modified) in a container, trailer, semitrailer, shelter or the like.

TESTING MACHINE,ELECTROMECHANICAL ACTUATOR

A device designed to check the functions and pre-set data of an electromechanically actuated component.

ADAPTER SET,CYLINDER COMPRESSION TESTER

A collection of ADAPTER (1), CYLINDER COMPRESSION TESTER of different types and sizes. May include a storage case.

ANALYZER,POWER STEERING SYSTEM

A portable testing device that measures both flow and pressure for automated diagnostic analysis of power steering system malfunctions.

TEST STAND,AUTOMOTIVE ENGINE AND TRANSMISSION

A test stand designed for evaluating the performance and/or operational characteristics of and making adjustments and/or repairs to automotive type engine and transmission assemblies.

COVER,PROTECTIVE,DUST AND MOISTURE SEAL

A cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.

HEATER,WHEEL SPINDLE,VEHICULAR

A hand-controlled electrically operated item designed to expand the axle eye by means of heat.

PROBE,ANALYZER,GASOLINE ENGINE EXHAUST

An item designed to obtain exhaust gas samples from vehicles to determine the pollutant content.

SHOP EQUIPMENT,HYDRAULIC SYSTEMS,TRAILER MOUNTED

A self-contained, trailer-mounted, mobile maintenance facility, designed for field testing, servicing, and repair of hydraulic circuits found in various equipment. Consists of such a major components as a trailer, enclosure with box racks and sliding tables, various electrical and non-electrical tools, testing equipment and spare parts.

ANALYZER,DIESEL ENGINE EXHAUST

An item designed to determine the concentration of solid particles in the exhaust gas of diesel engines. The meter readings are displayed and recorded. Hearing protection and storage box may be included. See also ANALYZER,GASOLINE ENGINE EXHAUST.

STAND SUBASSEMBLY,MAINTENANCE,AUTOMOTIVE ENGINE

A part of a STAND (1), MAINTENANCE, AUTOMOTIVE ENGINE which is designed to enable various maintenance works on combustion engines of vehicles.

STETHOSCOPE,MECHANIC'S,NONELECTRONIC

An instrument that locates any engine sound for trouble such as bearing noise, knocks, squeals, from the fan, water pump, valve tappets, and the like. An amplifying diaphragm and a flexible tube are included to reach any inaccessible machine or motor parts. It may also be used on other mechanical equipment.

STETHOSCOPE,MECHANIC'S,ELECTRONIC

An instrument that has a sensitive microphone in the tip attached to a flexible shaft for hard-to-reach areas. A light signals when the switch is on. Earphones are included to block out outside noise. It is usually battery operated. This item is designed to pinpoint noise and to locate worn bearings, bushings, defective valves, lifters, and the like.

ADJUSTING TOOL,PLATE,BRAKE SUPPORT

A special metallic arc shaped tool utilized during maintenance procedures for replacement/adjustment of brake shoes to preclude damaged brake parts and inoperative brake self-adjusters. Excludes ADJUSTING TOOL, BRAKE SHOE.

GUARD,SAFETY,COMPONENT TESTING,VEHICULAR

An item used for the protection of the testing personnel, when testing hydraulic, pneumatic, electric, or similar components such as valves, pumps, hoses, operating cylinders, engines and the like in hydraulic, pneumatic and electric systems.

INSTALLATION AND REMOVAL TOOL,VEHICLE SUSPENSION

An item specifically designed to assist in attaching and detaching components such as springs, shock absorbers, and the like.

STAND,MAINTENANCE,AUTOMOTIVE POWER TRAIN ASSEMBLIES

A supporting structure designed for assembling, disassembling vehicular engine/transmission/ transfer gearbox/differential/transaxle assemblies or subassemblies during maintenance operations. See also STAND, MAINTENANCE, AUTOMOTIVE AXLE; STAND, MAINTENANCE, AUTOMOTIVE ENGINE; and STAND, MAINTENANCE, AUTOMOTIVE TRANSMISSION.

REFINISHING TOOL,INJECTION TUBE,DIESEL ENGINE

A maintenance device designed to accommodate and refinish the ends of fuel injector tubes.

TESTER,CHASSIS,VEHICULAR

A testing unit with test plates and vibration tables mounted to the floor and designed to ascertain adjustment and wear data. The display of data can be computerized. The test unit can be combined with a TESTER, BRAKE, MOTOR VEHICLE.

TEST SET,FUEL CONTROL SYSTEM

An item specifically designed to provide appropriate instrumentation and data acquisition/control logic for testing of an aircraft or vehicular fuel system and/or components.

CONDUCTIVITY CELL,BATTERY WATER TESTING

A plastic cuplike item consisting of a base to which five (5) standard spaced contractor pins are attached, two of the pins having platinum or platinum plated electrodes firmly attached thereto inside the cup. The cup is provided with a removable cap individually fitted to the inside diameter of same. Used as a component in a battery-water tester assembly to determine whether the water to be used in storage batteries has been contaminated.

SLING,ENGINE AND TRANSMISSION,MOTOR VEHICLE

An item designed for use on specific type(s) of engine(s) and transmission(s).

TEST STAND,ELECTRIC AND HYDRAULIC SYSTEM COMPONENTS

A cabinetlike item usually with a front work area and consisting of the necessary instrumentation and mechanical and electrical facilities for component mounting. Designed to simultaneously test efficiency of packaged hydraulic pressure and electric power generating equipment. Component under test is equipped with self-contained power source. Excludes TEST STAND, HYDRAULIC SYSTEM COMPONENTS.

TEST STAND,HYDRAULIC PUMPING UNIT

A cabinetlike item with a front work area and consisting of the necessary instrumentation and facilities for testing a PUMPING UNIT, HYDRAULIC, (as modified). The item is not designed for mounting components under test. Excludes TEST STAND, HYDRAULIC SYSTEM COMPONENTS.

POLISHING MACHINE,CAMSHAFT AND CRANKSHAFT JOURNAL

A motor driven polishing machine that utilizes abrasive belts, used to produce a polished finish on camshaft and crankshaft journals. Excludes LAPPING MACHINE, METALWORKING, HIGH PRECISION.

TEST SET,PNEUMATIC SYSTEM COMPONENTS

An item designed specifically for making examinations of pneumatic system components, such as valves, pressure regulators, accumulators, hose lines, pressure switches, and the like. May include facilities for checking pneumatic systems for leakage and performance. See also TEST SET, LEAKAGE, GUIDED MISSILE DRAINAGE EQUIPMENT.

TEST SET,HYDRAULIC SYSTEM COMPONENTS

An item or collection of items designed specifically for making examinations of hydraulic system components, such as valves, pressure regulators, accumulators, hose lines, pressure switches, and the like. May include favilities for checking hydraulic systems for leaks and performance. See also TEST SET, LEAKAGE, GUIDED MISSILE DRAINAGE EQUIPMENT, OR TEST SET, PNEUMATIC SYSTEM COMPONENTS.

JACK,HYDRAULIC,AXLE

A single lifting device consisting of a actuated by air over hydraulic pump, mounted on a base which has casters or the like for mobility. Excludes JACK, DOLLY TYPE, HYDRAULIC and JACK DOLLY TYPE, PNEUMATIC.

ANALYZER,ENGINE

An instrument capable of performing two or more diagnostic tests on the exhaust, ignition, electrical, and the like, systems of a gasoline or diesel engine. Connecting and test cables may be included. See also METER, MULTIPLE SCALE and MULTIMETER.

TESTER,PRESSURE,GEARBOX

A unit designed for testing the operation pressure of a gearbox.

FILLER AND BLEEDER,HYDRAULIC SYSTEM,HAND OPERATED

A combination of storage tank(s), filters, switches, gages, hoses, and fittings sufficient to service a hydraulic system. The power for moving the hydraulic fluid is provided by a hand pump. May include hose racks or reels, and related plugs, caps, tools and miscellaneous hardware.

FILLER AND BLEEDER,HYDRAULIC SYSTEM,POWER OPERATED

A combination of storage tank(s), filters, switches, gages, hoses, and fittings sufficient to service a hydraulic system. The power for moving the hydraulic fluid is provided by compressed air or mechanical pump. May include a compressor, motor, engine, pump, hose racks or reels, and related plugs, caps, tools and miscellaneous items.

PARTS KIT,SPECIALIZED

Use of this name is restricted to the support of DLA's kitting project.

SUPPORT PLATFORM,JACK

An item, usually square in shape, made of various materials and designed to be placed under a SHOE, JACK-SUPPORT or the like, providing additional support and helping to prevent the SHOE, JACK-SUPPORT from sinking into the ground or surface upon which it is placed. A handle(s) may be included on item to aid in carrying and placement. Excludes: SHOE, JACK.

ANALYZER,INTERNAL COMBUSTION ENGINE EXHAUST

An instrument designed to indicate efficiency of the air to fuel mixture of either a gasoline or diesel internal combustion engine by determining the air to fuel ratio and/or the completeness of combustion. For items capable or only analyzing gasoline engine exhaust see: ANALYZER, GASOLINE ENGINE EXHAUST. For items capable or only analyzing diesel engine exhaust see: ANALYZER, DIESEL ENGINE EXHAUST.

LID,TEST SET CASE

An item of various shapes and material designed to enclose the top portion of a CASE (2), TEST SET. It is mounted to the case by means of bolts, clamps, latches, or the like.

INSTALLATION AND REMOVAL TOOL,VALVE

An item specifically designed to hold valves during maintenance to prevent valve damage.

SLING,LIFTING,FINAL DRIVE

A lifting device designed to install or remove a final drive assembly from a vehicle.

BEAD SEATER,PNEUMATIC TIRE

A device used to quickly seat a tubeless tire by supplying a high volume of air into the tire, expanding the tire sidewalls to set the bead onto the wheel rim. It can be used to mount pneumatic tires for various size wheels.

SPRAYER,HAND,INDUSTRIAL

A hand - and/or strap carried item, primarily designed to discharge/spraying a liquid (chemical liquid, oil and the like) as atomized particles by means of a manually operated pump. Excludes fingertip-pumped sprayers, mouth type sprayers, and sprayers with dusting attachments or accessories.

SIMULATOR,GUIDED MISSILE FLIGHT

An item designed to simulate signal voltages for ground guidance equipment that are analogous to signals received from a Guided Missile in flight. Excludes SIMULATOR, RADAR SIGNAL.

SIMULATOR,GUIDED MISSILE SAFETY AND ARMING DEVICE

An item whose electrical output provides synthetic signals, which, when applied to a Guided Missile safety and arming device test set will give a presentation similar to that observed under actual operating conditions.

SIMULATOR,GYROSCOPE SIGNAL

An item whose electrical output provides synthetic signals similar to those produced by a gyroscope(s).

TEST SET GROUP,SERVO

A group that provides facilities for testing servo systems and/or components.

CABLE ASSEMBLY,SPECIAL PURPOSE,ELECTRICAL

A definite continuous length of CABLE, SPECIAL PURPOSE, ELECTRICAL, having one or more ends processed or terminated in fittings which provide for connection to other items. Excludes items having branches or forks. Excludes LEAD, TEST and CABLE AND CONDUIT ASSEMBLY, ELECTRICAL.

ABSORBER,RADIO FREQUENCY RADIATION

An item specifically designed to absorb and dissipate incident radio frequency energy. It consists of a material, such as phenolic, varnished cardboard, cloth, or metal, the surface of which is coated or otherwise processed with a radio frequency absorbent element. See also DUMMY LOAD, ELECTRICAL.

CONTROL,GUIDED MISSILE TEST SET

A control which determines the mode of operation of a TEST SET, GUIDED MISSILE.

CONTROL,MISSILE GUIDANCE SYSTEM EXERCISE SET

A control that determines the mode of operation of a component that is used for the actuation of a missile guidance system during operational checkout procedures.

CALIBRATOR,SYNCHRO

An item consisting of two master synchros in a carrying case. Used for comparing and adjusting synchros to establish accurate zero or null position.

TEST SET,AUTOMATIC PILOT FLIGHT CONTROLLER

A test set primarily designed for use in making examinations of CONTROLLER, FLIGHT, AUTOMATIC PILOT.

TEST SET,AUTOMATIC PILOT INTEGRATORS

A test set specifically designed for use in making examinations of pitch, yaw, and drift integrators of an automatic pilot. See also TEST SET, AUTOMATIC PILOT.

TEST SET,CALIBRATION,MISSILE TRACKING ANTENNA

A test set specifically designed for making examinations of tracking antenna. May also provide facilities for recalibration.

TEST SET,ELECTRICAL CIRCUIT,GUIDED MISSILE LAUNCHER

A test set specifically designed for use in making examinations of electrical circuits on a guided missile launcher.

TEST SET,GUIDED MISSILE

A test set primarily designed for use in making examinations of electronic components, circuits, and/or electrically controlled systems within a Guided Missile. Excludes individual test sets designed for a single specific function.

TEST SET,GUIDED MISSILE LAUNCHER

A test set specifically designed for use in making examinations of a guided missile launcher(s) performance capabilities. For items used in making examinations of electrical circuits on a guided missile launcher, see TEST SET, ELECTRICAL CIRCUIT, GUIDED MISSILE LAUNCHER.

TEST SET,GUIDED MISSILE SAFETY AND ARMING DEVICE

A test set designed to check the operation of a SAFETY AND ARMING DEVICE, GUIDED MISSILE under simulated operational conditions.

TEST SET,GUIDED MISSILE TEST SET

An item specifically designed to measure the output voltages of a TEST SET, GUIDED MISSILE to localize defective circuits and/or subassemblies. See also CALIBRATOR SET, MISSILE SYSTEM TEST EQUIPMENT. Excludes PROGRAMMER, ELECTRONIC COMMAND SIGNALS.

TEST SET,HYDRAULIC CONTROL VALVE,GUIDED MISSILE

A device specifically designed for use in making examinations of the hydraulic control valve while mounted in a guided missile.

TEST SET,LEAKAGE,GUIDED MISSILE DRAINAGE EQUIPMENT

A portable device consisting of valve(s) and coupling hoses which are connected to the defueling lines of a guided missile to supply air for leak testing the missile propulsion draining equipment. May also be used in purging the fuel and oxidizer systems after drainage.

TEST SET,MISSILE GUIDANCE COMPONENTS

A test set specifically designed for use in making examinations of the components of a missile guidance set. Tests are conducted at a distance from the launch site. See also TEST SET, MISSILE GUIDANCE SET.

TEST SET,SYNCHRO

A test set primarily designed for use in making examinations of the operation of synchros, such as measuring the accuracy of angular motion. See also TRANSFORMER, SYNCHRO OVERLOAD.

PANEL,ACCELEROMETER ADJUSTMENT CONTROL,MISSILE GUIDANCE ALIGNMENT SET

A panel upon which is mounted such items as switches, indicator lights, meters, and the like, and which is specifically designed for the purpose of providing controls for accelerometer adjustment and determining when power has been applied to a missile guidance alignment set.

LEAK DETECTOR,REFRIGERANT GAS

PNEUMATIC SHOP,GUIDED MISSILE SYSTEM,TRUCK MOUNTED

A mobile unit permanently fitted with the necessary equipment and tools for testing and repairing components of a pneumatic system used in a guided missile system.

TEST STATION,GUIDED MISSILE,SEMITRAILER MOUNTED

A complete electronic test station specially designed to perform all field tests on a Guided Missile prior to preparation for firing. See also TEST STATION, GUIDED MISSILE, TRUCK MOUNTED.

TEST STATION,GUIDED MISSILE,TRUCK MOUNTED

A complete electronic test station specifically designed to perform all field tests on a guided missile prior to preparation for firing.

ADAPTER,TEST

An adapter which provides facilities for electrically connecting an item to be tested and a piece of test equipment. Do not use for interconnecting cables. Includes plug-in electronic component socket adapters which provide terminations for dynamic testing while an electronic component is inserted. See also COUPLER, TEST SET.

FILLER,HYDRAULIC SYSTEM,GUIDED MISSILE

A specifically designed item, mounted on a hand truck, consisting of an ethylene oxide cylinder, a hydraulic pump and necessary gages, hoses, and valves required to pressurize the hydraulic system of a guided missile. See also FILLER AND BLEEDER, HYDRAULIC SYSTEM.

STAND,MAINTENANCE,GUIDED MISSILE COMPONENTS

A cradle type supporting structure having elevating and/or positioning devices specifically designed for supporting and positioning guided missile components during maintenance operation. See also STAND, MAINTENANCE, RAIL TYPE.

CASE,TEST SET

ACTUATOR,ELECTRO-MECHANICAL,LINEAR

A self-contained power transmitting device designed to convert electrical energy into controlled mechanical force, in the form of linear (straight line) mechanical movement. Comprised of an electrical motor(s), gear box(es), screwjacks, limit switch(es), and such accessories as required for the specific moving and positioning of other components. Excludes hydraulic and pneumatic cylinders and screwjacks.

TEST STAND,HYDRAULIC SYSTEM COMPONENTS

A cabinetlike item usually with a front work area and consisting of the necessary instrumentation, integral hydraulic system and component mounting facilities. Designed to provide the hydraulic pressure for testing and/or calibrating hydraulic system components, such as valves, actuating cylinders, pressure regulators, accumulators, hose lines, hand and/or engine driven pumps and the like. May include facilities for filling and checking hydraulic systems for leakage and performance. See also PUMPING UNIT, HYDRAULIC.

TRUCK,GUIDED MISSILE TEST STATION

A truck with an insulated van type body, equipped with heating and air conditioning equipment, designed to provide personnel operating space, and is used to house and transport a guided missile test station. Excludes TRUCK, VAN.

TRAILER,GUIDED MISSILE TEST EQUIPMENT

An insulated van type trailer designed for specific load distribution and equipped with special shock resistant suspension. It provides personnel operating space and is used to house and transport guided missile test equipment. It may include air conditioning and heating units. Excludes TRAILER, VAN.

TABLE,RADAR MAINTENANCE

A table equipped with various electrical receptacles, circuit breakers, and terminal boards used in the maintenance, repair or testing of radar equipment.

TABLE,ELECTRICAL TEST AND MAINTENANCE

A table designed for general use in the testing of electrical circuits in the maintenance of instruments and appliances operated by electricity.

DECODER GROUP

A collection of items, which provide decoding facilities.

TEST SET GROUP,GUIDED MISSILE

A collection of electronic components and items which is a subdivision of a complete TEST SET, GUIDED MISSILE, but which is not capable of performing a complete operational function. Do not use if a more specific item name exists.

GENERATOR,ELECTRONIC COMMAND SIGNALS

An electronic device which provides signals for the actuation of components of a guided missile during prelaunch or testing function. See also PROGRAMMER, ELECTRONIC COMMAND SIGNALS.

TESTER,PITOT AND STATIC SYSTEMS

A device designed to check the pitot and static systems of aircraft, guided missiles, rockets or the like for leaks. It may also be used to calibrate air speed indicators, altimeters, rate of climb indicators and machmeters.

TESTER,STATIC SYSTEM

A device specifically designed to check the static tube system of a guided missile, rocket, or the like for leakage. Excludes TESTER, PITOT AND STATIC SYSTEMS.

SIMULATOR,RADAR TARGET

An item whose reflection properties are similar to those of a radar target. It is designed for fixed position installation so that its range and azimuth, with respect to the equipment with which it is used is known. It is normally used for the calibration of a radar set. See also TARGET, RADAR.

ALIGNMENT SET,MISSILE GUIDANCE

A fixed number of components and/or items, not all having the same basic name, which are required for the performance of a complete specific operational function. May exclude certain operating components supplied separately or already present at the point of usage that provides facilities for the preflight orientation-to-target by insertion of flight coefficients into a missile guidance set.

COUPLER,KEYER

A coupler which provides a means of transfer of electrical energy between a keyer and other components.

PROTRACTOR,FIN POSITION

A protractor specifically designed for measuring the angular position of guided missile fins.

REFILL KIT,PROPELLANT CONDITION TEST KIT

A collection of various chemicals of specific quantities, used to replenish a TEST KIT, PROPELLANT CONDITION.

TEST KIT,PROPELLANT CONDITION

A collection of items such as bottle(s), gage(s), ladle(s), syringe(s), vial(s), various chemicals, and accessories required for use in determining dilution, reaction, and solids content of PROPELLANT (as modified).

PARTS KIT,RADAR TEST SET

COVER,INTERVAL TIMER

TEST KIT,SUPPLEMENTAL,GUIDED MISSILE SHOP EQUIPMENT

A collection of items which are supplemental in nature and intended to facilitate certain guided missile test functions not already provided for in other test sets and/or shop equipment. May include such items as jigs, test fixtures, indicators, substitute missile components and/or items, but does not include hand tools or repair parts. Excludes SHOP EQUIPMENT (as modified); TEST SET (as modified) and SUPPLEMENTARY EQUIPMENT (as modified).

MONITOR,VOLTAGE DEVIATION

An item that accepts fixed voltages from test points in another component or set, and displays them in such a manner that deviation from a predetermined voltage value is readily apparent. The display is in terms of "good" and "bad" and is not in terms of voltage values. For items that display the same or similar information that is derived from a radio frequency signal input, see MONITOR, ERROR VOLTAGE. For items that indicate voltage values in either scaler or digital form, see VOLTMETER. See also INDICATOR (as modified).

LINK,HOISTING

A rigid item which is less than three times as long as it is high. It includes an eye(s), ring(s), hole(s), loop(s), or the like, to facilitate hoisting and is designed to permit attaching such items as sling legs, shackles, rods, and hooks at two or more points. May include mounting hardware such as bolts, screw, washers and the like. Excludes SPREADER, SLING. See also BEAM, HOISTING. Do not use if a more specific name applies, such as RING, CONNECTING, ROUND and LINK, CHAIN, END.

CABLE AND CONDUIT ASSEMBLY,ELECTRICAL

A CABLE ASSEMBLY, SPEICAL PURPOSE, ELECTRICAL; or CABLE ASSEMBLY, POWER, ELECTRICAL; inclosed in a separate CONDUIT, METAL, FLEXIBLE; CONDUIT, METAL, RIGID; CONDUIT, NONMETALLIC, RIGID; CONDUIT ASSEMBLY, METAL, FLEXIBLE; CONDUIT ASSEMBLY, METAL, RIGID; or CONDUIT ASSEMBLY, NONMETALLIC, ELECTRICAL. Excludes LEAD, TEST; and items having branches or forks. See also LEAD AND CONDUIT ASSEMBLY, ELECTRICAL.

STAND,MAINTENANCE,RAIL TYPE

An item consisting of a pair of horizontal parallel rails or tracks mounted on telescoping legs with adjustable foot assemblies and rail coupling devices. Designed for supporting engine cradles, missile component cradles, and the like, during maintenance operations and transferring of the cradles from one rail type transporting and/or storage vehicle to the other. Excludes rail type maintenance stands having attached cradles or additional equipment designed for specific items.

LEVEL,TEST STAND

A device which utilizes a VIAL, LEVEL. It is used for leveling, adjusting and setting angles for test stand of which it is a component part.

TAPE,PUNCHED PROGRAM

May be in roll form or encased in a cartridge or cassette.

TAPE SET,PUNCHED PROGRAM

FILLER AND BLEEDER,COOLING SYSTEM

A device consisting of an inclosed tank, pressure/vacuum gages, hoses, valves, and necessary accessories utilizing air pressure to force fluid into or from cooling systems.

TEST EQUIPMENT,GUIDED MISSILE REMOTE CONTROL SYSTEM

A group of items, such as oscilloscopes, frequency meters, signal comparators, signal generators, audio oscillators, and other necessary equipment for testing components of a guided missile remote control system. It does not contain hand tools or spare replacements.

TEST STATION,GUIDED MISSILE SYSTEM

A complete electronic test station designed specifically for performing tests on a guided missile system. Excludes TEST STATION, GUIDED MISSILE SYSTEM COMPONENTS.

TEST STATION,GUIDED MISSILE SYSTEM COMPONENTS

A complete electronic test station designed specifically for performing tests on guided missile system components which consist of plug-in assemblies, commonly referred to as modules or potted components. It is equipped with spare replacements and may have a self-contained power source. It also provides work space and may contain heating and air conditioning units. See also TEST STATION, GUIDED MISSILE, TRUCK MOUNTED.

PANEL,PATCHING,PROGRAMMING

A panel consisting of s single flat-surfaced item which contains contact springs, jacks, sockets, and the like, and is encased in a frame assembly. It is used for connecting to the internal wiring of the electronic equipmetnt in use. It may be designed to accept either nonremovable or interchangeable patchboards that can be programmed with patchords to create the circuit required for a given operation. Excludes PANEL, PATCHING, ANTENNA; PANEL, PATCHING, COMMUNICATION; and SWITCHBOARD, PATCHING, COMMUNICATION. See alos PATCHBAORD, ELECTRICAL.

TEST STATION,GUIDED MISSILE SYSTEM-SYSTEM COMPONENTS,SEMITRAILER MOUNTED

An item consisting of a TEST STATION, GUIDED MISSILE SYSTEM; and a TEST STATION, GUIDED MISSILE SYSTEM COMPONENTS mounted in a SEMITRAILER, VAN, specifically designed for performing tests on a guided missile system and/or guided missile system components. See also TEST STATION, GUIDED MISSILE SYSTEM; and TEST STATION, GUIDED MISSILE SYSTEM COMPONENTS.

TEST KIT,GUIDED MISSILE SYSTEM

A collection of items consisting of test adapters, test leads, cable assemblies, test programmer controls, gunner's quadrant, telescope support, and the like, contained in a compartmented shipping and storage container. The item is designed to provide specific test functions in a guided missile system test station and/or shop equipment. It does not contain hand tools. Excludes TEST KIT, SUPPLEMENTAL, GUIDED MISSILE SHOP EQUIPMENT; TEST SET (as modified) and SUPPLEMENTAL EQUIPMENT (as modified).

PROGRAM BOARD ASSEMBLY

A control (programmed) board grouped with one or more component board(s). It may include patchboards or terminal boards assembled on a common mounting which provides a point of convenient interconnections by use of plugs, patchcords, or other means of connecting electrical circuits and is designed to be programmed (prewired) to create the circuit required for a given operation. Excludes PATCHBOARD, ELECTRICAL; ELECTRONIC COMPONENTS ASSEMBLY; and PANEL PATCHING (as modified).

RECORDER-REPRODUCER,GUIDED MISSILE SYSTEM

A complete set of components and/or items, not all having the same basic name which are specifically designed to record and store program event data of a guided missile system, and reproduce this data for analysis and evaluation. The item may also have the capability to store and reproduce pre-recorded programs for the missile system. Excludes RECORDER-REPRODUCER SET, SIGNAL DATA.

TEST SET,GUIDED MISSILE LAUNCHER ALIGNMENT-CIRCUIT AMPLITUDE

A collection of items such as a boresight telescope and target, evaluator missile and power cable(s), designed to facilitate examinations of a guided missile launcher(s) to determine correct launcher alignment, remote control signal amplitudes and deviations, shear pin position and the like. For items designed for launcher alignment only, see ALIGNMENT SET, LAUNCHER; for items designed to examine launcher electrical circuits only, see TEST SET (1), ELECTRICAL CIRCUIT, GUIDED MISSILE LAUNCHER; for items which do not require alignment capabilities, see TEST SET (1), GUIDED MISSILE LAUNCHER.

TEST SET GROUP,GUIDED MISSILE INFRARED TRACKER

An item specifically designed to be used in conjunction with a TEST SET, GUIDED MISSILE INFRARED TRACKER to provide additional functional capabilities for making examinations of a TRACKER-VIEWER, INFRARED, GUIDED MISSILE.

TEST SET,MISSILE GUIDANCE SET

A test set specifically designed for use in making examinations of a MISSILE GUIDANCE SET. See also TEST SET, MISSILE GUIDANCE COMPONENTS.

SHOP EQUIPMENT,GUIDED MISSILE

See also SHOP EQUIPMENT (1), GUIDED MISSILE, SEMITRAILER MOUNTED. Excludes SHOP EQUIPMENT (1), GUIDED MISSILE SYSTEM.

SHOP EQUIPMENT,GUIDED MISSILE,REMOTE CONTROL SYSTEM

SHOP EQUIPMENT,GUIDED MISSILE,SEMITRAILER MOUNTED

See also SHOP EQUIPMENT (1), GUIDED MISSILE.

SHOP EQUIPMENT,GUIDED MISSILE SYSTEM

Excludes SHOP EQUIPMENT (1), GUIDED MISSILE.

SHOP EQUIPMENT,CONDUCT OF FIRE TRAINER

SHOP EQUIPMENT,GUIDED MISSILE SIMULATOR STATION

CONTROLLER,TEST,GUIDED MISSILE SYSTEM

An item used in conjunction with other items such as a guided missile system test set, simulator(s) and the like. It is designed to interface with two or more components of a guided missile system to provide readiness verification and fault isolation. It measures and controls power inputs, frequency and time intervals and provides signal switching and processing capabilities. May include digital keyboard and/or display.

TEST SET,GUIDED MISSILE LAUNCHING STATION

A portable test set used to detect malfunctions of launching equipment. Excludes TEST SET, ELECTRICAL CIRCUIT, GUIDED MISSILE LAUNCHER and TEST SET, GUIDED MISSILE LAUNCHER ALIGNMENT-CIRCUIT AMPLITUDE.

COMPUTER SUBASSEMBLY

Two or more different types of items, having a common mounting or mounted on each other which together form a portion of a computer, but which in itself is not a complete functioning item and cannot be assigned a more definite item name.

TERMINAL,DATA PROCESSING

An item designed to permit access to a COMPUTER (as modified) for the purpose of entering and retrieving data. It must include a data input device such as a KEYBOARD, DATA ENTRY&#59; TOUCHSCREEN, DATA ENTRY&#59; or GRAPHICS TABLET, DATA ENTRY and a data output device such as a DISPLAY UNIT&#59; DISPLAY, OPTOELECTRONIC&#59; or PRINTER, AUTOMATIC DATA PROCESSING. It may include a JOYSTICK, DATA ENTRY&#59; SCANNER, OPTICAL&#59; MOUSE, DATA ENTRY&#59; MODEM, COMMUNICATIONS&#59; or similar device. Excludes DATA STATION.

CASE,COLLIMATOR SET

A portable case designed to hold COLLIMATOR SET (as modified). For single collimators see CASE (2), OPTICAL INSTRUMENT or CASE (2), SURVEYING INSTRUMENT.

FIXTURE,GUIDED MISSILE MAINTENANCE

A fixture designed to mount or position guided missile subassemblies such as rate sensing units, control subassemblies, missile guidance sections or the like to facilitate inspection, repair, and/or replacement of component parts.

PLATE,MOUNTING,GUIDED MISSILE

A generally flat metallic item varied in shape specifically designed for mounting guided missile components used on test stands only. It may or may not have a centrally located hole but must have drilled and/or tapped holes for mounting purposes. Excludes SHIM; SPACER, PLATE; and FIXTURE, GUIDED MISSILE MAINTENANCE.

SIMULATOR,CAVITY VOLUME

An item designed to simulate the inertial member assembly. It is used to produce similar conditions of actual performance to check out and troubleshoot the test station for leakage by providing the appropriate required quantity and flow characteristics of fluids. It consists of a cylinder, base, cap and associated piece parts that are fastened together by cap screws.

ADAPTER GROUP,COMPUTER TEST SET

A group of items composed of the necessary test card assemblies, extender assemblies, cables, plugs and the like to be used as an interface between the computer test set and item under test.

CONTROL PANEL,TEST

A panel that is specifically designed to control the actions of and is an integral part of a test set or a test station. Excludes PANEL, TEST, ELECTRICAL; PANEL, POWER DISTRIBUTION; PANEL, INDICATOR; and PANEL BLANK.

PANEL,CONTROL,ELECTRICAL-ELECTRONIC EQUIPMENT

A panel, upon which are mounted such items as indicator lights, meters, relays, switches and the like, which is specifically designed for the purpose of controlling the operation of electrical and electronic equipment. See also PANEL, TEST, ELECTRICAL.

MODIFICATION KIT,MAINTENANCE AND REPAIR SHOP EQUIPMENT

An item or items employed to modify specially designed maintenance or repair shop equipments.

TESTER,BOND,GUIDED MISSILE

A device consisting of such items as a curved plexiglass vacuum frame with fittings and carrying case. It is designed to view all areas of the external protective material under vacuum. Its purpose is to detect all voids and bubbles indicating areas not permanently bonded.

HOUSING,TIMER

The outer component of a timer designed to inclose, support and/or protect the timer mechanism.

COVER,ELECTRONIC COMMUNICATION EQUIPMENT

A cover specifically designed for electronic communication equipment. It may be designed to protect against shock, vibration, dust and/or moisture.

TEST SET SUBASSEMBLY,GUIDED MISSILE COMPONENTS

TEST SET,MISSILE PROGRAMMER-TEST STATION

A test set specifically designed for use in making examinations of a POWER STATION, GUIDED MISSILE SYSTEM (as modified).

STAND,MAINTENANCE,GUIDED MISSILE

An item consisting of one or more STAND,MAINTENANCE,GUIDED MISSILE COMPONENTS and additional equipment such as holders, cradles and the like which are required for the maintenance and/or mounting of a guided missile. See also STAND,MAINTENANCE,RAIL TYPE.

ACCESSORY KIT,TEST SET

An accessory kit containing two or more supplemental items, such as attentuators, dummy loads, BRIDGE, IMPEDANCE, isolation transformers, and the like which are necessary to perform test and/or perform maintenance procedures on a piece of equipment or a system in conjunction with a TEST SET, (as modified).

TEST KIT,GUIDED MISSILE PRESSURIZATION EQUIPMENT

A group of items specifically designed to maintain and service a nitrogen servicing or recharging unit.

WEIGHT SIMULATOR,GUIDED MISSILE SUBASSEMBLY

An item which in weight and/or shape resembles a subassembly of a guided missile and replaces it without changing the mechanical properties of the guided missile. It may include electrical, hydraulical, mechanical devices for mounting plug-type or threaded terminals. A storage case may be included.

TEST PROGRAM SET,GUIDED MISSILE MAINTENANCE

A collection of items used to facilitate inspection, fault isolation, maintenance, repair, and other evaluations of guided missile components. May include cables, fixtures, interface adapters, software, and operational instructions.

DRAWER,ELECTRICAL TEST SET ADAPTER

An item designed to fulfil a partial function in an ADAPTER (2), TEST which is constructed as a drawer unit. The item is not functional without other drawer units.

ADAPTER SUBASSEMBLY,ELECTRICAL TEST SET

An item which is a subassembly of an Adapter, Electrical Test Set and cannot be assigned a more definite item name.

PANEL ASSEMBLY,TEST SET,GUIDED MISSILE SYSTEM

A panel which accomodates connectors, an air filter, a heat sink, and two handles. It constitutes the front panel of a TEST SET, GUIDED MISSILE SYSTEM.

GUARD,SAFETY,COMPONENT TESTING,NONAIRCRAFT

An item used for the protection of the testing personnel, when testing checkout equipment specially designed for use with guided missiles and guided missile remote control systems.

ALIGNMENT DEVICE,GUIDED MISSILE

An item specifically designed to align and/or position components of a guided missile during maintenance or assembly.

TEST SET,LIQUID COOLER,GUIDED MISSILE

An item that measures the flow rate, pressure and temperature of the liquid coolant supplied to the missile guidance set.

ADAPTER,CABLE BREAKOUT

An item designed to electrically and physically accommodate cable connectors and the terminations to which the cable would normally be connected, and thereby provide facilities for the insertion of test equipment leads, probes, and the like, for test and/or monitoring of power, intelligence, and the like, that may be on the wire complement of the cable. The item may provide facilities for either series, shunt, or interwire tests of the cable under actual operating conditions.

ADAPTER SET,CABLE BREAKOUT

A set consisting of two or more ADAPTER, CABLE BREAKOUT with associated connecting cables that provide facilities for the insertion of test equipment leads, probes, and the like, for test and/or monitoring of power, intelligence, and the like, that may be on the wire complement of the cable. The item may provide facilities for either series, shunt, or interwire tests of the cable while under actual operating conditions.

AMPLIFIER-GENERATOR,ELECTRON BEAM DEFLECTION

A single component with the dual function of an amplifier, and of producing electrical signals utilized in the movement of an electron beam on the face of a cathode ray tube.

CABLE ASSEMBLY,POWER,ELECTRICAL,BRANCHED

A definite continuous length of CABLE, POWER, ELECTRICAL with branches (forks), and having one or more ends processed and/or terminated in fittings which provide for connection to other items. Excludes LEAD, TEST. See also WIRING HARNESS, BRANCHED.

CABLE ASSEMBLY,SPECIAL PURPOSE,ELECTRICAL,BRANCHED

A definite continuous length of CABLE, SPECIAL PURPOSE, ELECTRICAL with branches (forks), and having one or more ends processed and/or terminated in fittings to provide for connection to other items. Excludes LEAD, TEST. See also wiring harness.

CALIBRATOR SET,MISSILE GUIDANCE SET GROUP

A fixed number of components and/or items, not all having the same basic name, which are required and specifically designed to determine the accuracy of a MISSILE GUIDANCE SET GROUP.

CALIBRATOR SET,MISSILE SYSTEM TEST EQUIPMENT

A collection of all the necessary items and components required for calibrating the test equipment of a guided missile system. The set consists of such items as oscillators, power supply, oscilloscope, program device pulse box, frequency multiplier, test stand, microammeter, pressure gage tester, and the like, used individually or conjectively to perform the necessary calibration. For items designed to calibrate a single item, see CALIBRATOR (as modified). Excludes CALIBRATOR SET, RADAR TEST SET.

CONSOLE,POWER DISTRIBUTION

A console specifically designed to distribute and control electrical power. It includes equipment to supply either alternating or direct current of various output characteristics.

CASE,INTERVAL TIMER

A case specifically designed to inclose and protect an interval timer.

CONTROL,MISSILE GUIDANCE ALIGNMENT SET

A control that determines the mode of operation of a MISSILE GUIDANCE ALIGNMENT SET.

CONTROL,VELOCITY ADJUSTMENT

An item that provides facilities for the adjustment of the components of a missile guidance set during pre-launch operations so as to establish velocity-to-be-gained levels of missile inflight performance.

CORE MEMORY UNIT

An electronic item which accepts and systematically retains digital or analog input data in such a manner as to facilitate rapid recovery of the stored information. The item consists of one or more memory array frames and wound magnetic cores. It may include core selector circuitry, signal drivers, and memory address register. See also MAGNETIC DRUM, DATA STORAGE.

COUPLER,SELECTOR,TEST SET

A single component with the dual function of providing coupler facilities, and of selecting components of another item during the conduct of a testing operation.

DUPLEXER-MIXER

A single component with the combined dual function of duplexing and mixing electronic signals. May include integral isolator and interconnecting waveguide.

LEVELING FIXTURE,GYRO INSTRUMENT TESTING

A portable instrument specifically designed to mount and level a guided missile gyroscope assembly for alignment by the electrical test method. It consists of a vertical plate rigidly attached perpendicular to the base plate which contains level vials and leveling devices. Excludes TABLE (2), TILTING, GYRO INSTRUMENT TESTING.

MONITOR,MISSILE GUIDANCE SET

An item which presents operational information derived from a missile guidance set, to which it is connected.

PLUNGER,DETENT

A metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.

SIMULATOR,ACCELEROMETER SIGNAL

An item whose electrical output provides synthetic pitch and yaw signals similar to those produced by an accelerometer.

SIMULATOR,COORDINATE DATA

An item whose electrical output provides synthetic signals that represent the X-Y parameters of coordinates applicable to one or more targets. It may also provide one or more reference signals.

SIMULATOR,GUIDED MISSILE PRELAUNCH SIGNALS

An item designed to simulate guided missile prelaunch signals or voltages. Excludes SIMULATOR, GUIDED MISSILE FLIGHT.

SWITCHING UNIT,YAW-PITCH,GUIDED MISSILE

An item specifically designed to provide switching facilities to select yaw and pitch signals received from a guided missile for voltage calibration and test purposes.

TEST SET,CONTROL

A test set specifically designed for use in making examinations of controls.

TEST SET,GUIDED MISSILE ANGULAR TRACKER RECEIVER

A test set specifically designed for use in making examinations of the receiver portion of a TRACKER, ANGULAR, GUIDED MISSILE. Excludes TEST SET (1), MISSILE GUIDANCE COMPONENTS; TEST SET (1), RADAR and TEST SET (1), RADIO.

TEST SET,GUIDED MISSILE FIRING PANEL

A test set specifically designed for use in making examination of a PANEL, FIRING, GUIDED MISSILE.

TEST SET,GUIDED MISSILE PRELAUNCH SIGNALS SIMULATOR

A test set specifically designed for use in making examinations of a SIMULATOR, GUIDED MISSILE PRELAUNCH SIGNALS.

TEST SET,GUIDED MISSILE TARGET RANGING SET

A test set specifically designed for making examinations of a guided missile target ranging set. Excludes TEST SET, RADAR.

TEST SET,PLATFORM ELECTRONICS

A test set specifically designed for use in making examinations of the electronic components of a stable platform.

TEST SET GROUP,MISSILE GUIDANCE SET COMPONENTS

A group that provides facilities for testing components of a missile guidance set.

TEST STAND,ELECTRIC AND HYDRAULIC SYSTEM COMPONENTS

A cabinetlike item usually with a front work area and consisting of the necessary instrumentation and mechanical and electrical facilities for component mounting. Designed to simultaneously test efficiency of packaged hydraulic pressure and electric power generating equipment. Component under test is equipped with self-contained power source. Excludes TEST STAND, HYDRAULIC SYSTEM COMPONENTS.

TEST STAND,HYDRAULIC PUMPING UNIT

A cabinetlike item with a front work area and consisting of the necessary instrumentation and facilities for testing a PUMPING UNIT, HYDRAULIC, (as modified). The item is not designed for mounting components under test. Excludes TEST STAND, HYDRAULIC SYSTEM COMPONENTS.

TRANSPORT,MAGNETIC TAPE

A component of data, audio or video recording, processing and/or reproducing equipment, that accommodates magnetic recording tape. It consists of items such as recording-reproducing heads, tape controls, bias generators, meters, reels, and the like, that facilitate the utilization of magnetic tape for rapid information recording and retrieval. The item does not include amplifiers, drivers, or transducers primarily designed for signal amplification or conversion; however, it may include elementary devices, such as cathode followers that insure impedance matching, noise reduction, stability, and similar functions. See also READER, PUNCHED TAPE.

COLLIMATOR SET,RADAR,GUIDED MISSILE SYSTEM

A complete set specifically designed for alignment of the radars in a guided missile remote control system.

TEST SET,GUIDED MISSILE POWER STATION,TRUCK MOUNTED

A mobile unit completely equipped with the necessary components required for making examinations of a POWER STATION, GUIDED MISSILE SYSTEM (as modified). Excludes TEST SET, POWER SUPPLY.

STAND,TEST,GUIDED MISSILE

An item specifically designed for supporting a guided missile during test procedures.

COMPARATOR MODULE,SIGNAL

An item specifically designed to correlate information from two or more signals when installed in an appropriate circuit. For similar items not having modular characteristics, see COMPARATOR, SIGNAL.

TEST STATION,GUIDED MISSILE

A complete test station specifically designed to perform all electronic and/or hydraulic testing of a guided missile. Excludes TEST STATION, GUIDED MISSILE, SEMITRAILER MOUNTED; and TEST STATION, GUIDED MISSILE, TRUCK MOUNTED.

SIMULATOR,WARHEAD SECTION COMPONENTS

An item designed to simulate the electrical and/or mechanical functions of the components of a warhead section. It is used in conjunction with a guided missile, rocket, or the like during training, practice, and/or test procedures.

TEST SET,GUIDED MISSILE SYSTEM TEST EQUIPMENT

A test set specifically designed for performing maintenance testing of test equipment used in a guided missile system shop equipment and/or test station. It is designed to localize defective circuits, assemblies, and/or subassemblies. Excludes TEST KIT, SUPPLEMENTAL, GUIDED MISSILE SHOP EQUIPMENT; and TEST SET, GUIDED MISSILE TEST SET.

TEST SET,GUIDED MISSILE SYSTEM

A test set specifically designed for making examinations of guided missile system, including electronic components and circuits. Excludes individual test sets designed for a single specific function. Excludes TEST SET, ELECTRONIC SYSTEMS.

TEST SET,GUIDED MISSILE REMOTE CONTROL COMPONENTS

A test set specifically designed for making examinations of specially designed guided missile remote control components, such as power supply(ies), transmitter(s), receiver(s), signal data converter(s), and the like. Excludes TEST SET, MISSILE GUIDANCE COMPONENTS.

TEST STAND,STABILIZED PLATFORM

An item specifically designed to support and position a guided missile inertial guidance system platform, by tilting or rotating as desired, to orient accelerometers, pendulums, and azimuth prisms(s), in the required pitch, roll, or azimuth positions. It includes appropriate checkout and calibration equipment.

ALIGNMENT SET,INFRARED TRANSMITTER,GUIDED MISSILE REMOTE CONTROL SYSTEM

A collection of items, such as a specially designed sighting telescope, target unit, measuring line, and the like, for checking the alignment of an infrared transmitter optical reference axis with respect to the optical portion of a guided missile tracker. Excludes ALIGNMENT SET, MISSILE GUIDANCE; COLLIMATOR (as modified); SIGHT (as modified); and TEST SET (as modified).

TEST SET,GUIDED MISSILE INFRARED SEEKER SECTION

A test set specifically designed for making examinations of a SEEKER SECTION, INFRARED, GUIDED MISSILE. Excludes TEST SET, GUIDED MISSILE; TEST SET, MISSILE GUIDANCE; and TEST SET, MISSILE GUIDANCE COMPONENTS.

COUNTING UNIT,DIGITAL

A binary counting unit used to electronically count the quantity of discrete electrical impulses applied to its input terminal. It is normally used in conjuction with other counting units in a COUNTER, ELECTRONIC, DIGITAL READOUT. The unit is designed to count from zero to a predetermined digit, return to zero, and simultaneously generate an output signal for applications as required, such as to other counting units, meters, or remote indicators. It may be a plug-in or circuit card unit of vacuum tube or transistorized design. It may be nonindicating or indicating with display in the form of vertical, horizontal, in-line, or remote readout. Excludes COUNTER, ELECTRICAL; COUNTER, ELECTRONIC, DIGITAL; and COUNTER, ELECTRONIC, DIGITAL READOUT. See also INDICATOR, DIGITAL DISPLAY.

TEST EQUIPMENT,GUIDED MISSILE SYSTEM

A group of items, such as signal generators, voltmeters, test adapters, flowmeters, calibrators, gyro simulators, gages, power supplies, thermocouplers, and other necessary equipment for testing components of a guided missile system. It does not contain hand tools or spare replacements. See also TEST EQUIPMENT, GUIDED MISSILE REMOTE CONTROL SYSTEM.

SUPPLEMENTARY EQUIPMENT,GUIDED MISSILE SYSTEM TEST STATION

A collection of items such as cable assemblies, electrical leads, adapters, jigs, fixtures, patchboards, special design tools and accessories, and the like. The equipment is specifically designed to extend the capabilities of a basic TEST STATION,GUIDED MISSILE SYSTEM for specific missile system(s) application. Excludes SHOP EQUIPMENT (as modified); TEST EQUIPMENT (as modified); and TEST KIT,SUPPLEMENTAL,GUIDED MISSILE SHOP EQUIPMENT.

ALIGNMENT SET,LAUNCHER

An item consisting of one or more instruments designed specifically to accurately align a launcher to the operator's line of sight when positioned at a distant aim point. It provides continuous observation of alignment conditions during adjustment.

TEST STAND,ELECTRIC,HYDRAULIC AND PNEUMATIC SYSTEM COMPONENTS

A cabinetlike item usually with a front work area and consisting of the necessary instrumentation, mechanical and electrical facilities for component mounting. Designed to test efficiency of packaged hydraulic and pneumatic pressure and electric power generating equipment. Component under test is equipped with self contained power source. Excludes TEST STAND, HYDRAULIC SYSTEM COMPONENT; TEST STAND, ELECTRIC; and HYDRAULIC SYSTEM COMPONENTS.

STAND,GUIDED MISSILE TEST SET

An item specifically designed for holding and supporting a TEST SET (as modified). It may have casters or wheels to facilitate movement in a shop area and may have features for tilt and/or height adjustment of the test set. For items having pulling or towing facilities, see TRUCK (as modified). Excludes FIXTURE (as modified); STAND, MAINTENANCE, GUIDED MISSILE COMPONENTS; and TRUCK, LIFT (as modified).

TEST SET,EXPLOSIVE BRIDGE WIRE

A test set specifically designed for making examinations of explosive bridge wire used in guided missile ignition systems without the risk of ignition. It utilizes a change in capacitance to detect a broken wire.

TEST SET,GUIDED MISSILE INFRARED TRACKER

An item specifically designed for making examinations of a guided missile infrared tracker. May include facilities for tracker collimation. Excludes TEST SET, GUIDED MISSILE INFRARED SEEKER SECTION; and TEST SET, GUIDED MISSILE REMOTE CONTROL COMPONENTS.

TEST SET,TARGET ALERT DATA DISPLAY SET

A test set specifically designed for use in making examinations of a target alert data display set.

TEST SET,PNEUMATIC SYSTEM COMPONENTS

An item designed specifically for making examinations of pneumatic system components, such as valves, pressure regulators, accumulators, hose lines, pressure switches, and the like. May include facilities for checking pneumatic systems for leakage and performance. See also TEST SET, LEAKAGE, GUIDED MISSILE DRAINAGE EQUIPMENT.

PLUG-IN UNIT,ELECTRICAL-ELECTRONIC TEST EQUIPMENT

An electronic subassembly designed to be plugged into one or more basic pieces of test equipment to extend the capabilities of the basic instrument. The basic instrument cannot function without one or more plug-in units (as required) in position.

TEST SET,GUIDED MISSILE RADAR SEEKER SECTION

A test set(1) specifically designed for making examinations of a SEEKER SECTION, RADAR, GUIDED MISSILE. Excludes TEST SET, GUIDED MISSILE; TEST SET, MISSILE GUIDANCE; and TEST SET, MISSILE GUIDANCE COMPONENTS.

LID,TEST SET CASE

An item of various shapes and material designed to enclose the top portion of a CASE (2), TEST SET. It is mounted to the case by means of bolts, clamps, latches, or the like.

CHARGING AND TESTING UNIT,NITROGEN

A mobile unit used to charge and test an item (infrared equipment, guided missile, guided missile shipping and storage container and the like) containing nitrogen. It allows one to verify nitrogen pressure and may analyze the item using a nitrogen scan. It can be reloaded from a source containing nitrogen such as a bottle or the like.

MAINTENANCE KIT,GUIDED MISSILE

A maintenance kit for components of a GUIDED MISSILE (as modified).

COMPUTER SYSTEM,SPECIAL PURPOSE

One or more computers and all the associated software and peripheral hardware, designed to perform a specific task. Do not use if a more specific name applies.

ENCODER,ELECTRICAL-MECHANICAL

An electro-mechanical assembly containing an encoder drawer and various devices which operate to input and lock code into Mechanical Code Units.

STAND SUBASSEMBLY,MAINTENANCE,GUIDED MISSILE COMPONENTS

An item which is a part of a STAND,MAINTENANCE,GUIDED MISSILE COMPONENTS.

COMPUTER,SPECIAL PURPOSE

One or more computers which may or may not have one or more associated software designed to perform one or more specific tasks. For a computer not designed for a specific task, see COMPUTER DIGITAL. Do not use if a more specific name applies.

CABINET,GUIDED MISSILE COMPONENTS,MOBILE

A hand-pushed mobile cabinet mounted on wheels or casters. It is designed for storing and transporting guided missile components. Cabinet design includes drawers and may include separate compartments. The top is suitable for a working surface. It may also be used for storing and transporting accessories and/or mounting hardware.

TEST SET,GUIDED MISSILE AND LAUNCHER

A test set primarily designed for use in making examinations of a GUIDED MISSILE (as modified) and a guided missile launcher and/or a GUIDED MISSILE AND LAUNCHER (as modified). Excludes TEST SET,GUIDED MISSILE and TEST SET,GUI DED MISSILE LAUNCHER.

TEST STAND,GUIDED MISSILE AND LAUNCHING ASSEMBLY

A structure designed for supporting a guided missile and launching assembly during test procedures. Excludes: STAND,TEST,GUIDED MISSILE.

TEST STAND SUBASSEMBLY,GUIDED MISSILE

An item which is part of a Stand,Test,Guided Missile. Do not use if a more specific name applies.

TEST STAND SUBASSEMBLY,GUIDED MISSILE AND LAUNCHING ASSEMBLY

An item which is a part of a Test Stand,Guided Missile and Launching Assembly.

MAINTENANCE KIT,GUIDED MISSILE AND LAUNCHING ASSEMBLY

A maintenance kit for components of a GUIDED MISSILE AND LAUNCHER ASSEMBLY.

MAINTENANCE KIT,GUIDED MISSILE SUBSYSTEM

A maintenance kit for components of a GUIDED MISSILE SUBSYSTEM (as modified). It may include a carrying case.

TEST SET,COMMAND LAUNCH UNIT

A test set primarily designed for use in making examinations of a LAUNCH UNIT,COMMAND. EXCLUDES: TEST SET,GUIDED MISSILE LAUNCHING STATION.

STAND,MAINTENANCE,GUIDED MISSILE LAUNCHER

A supporting structure which may or may not have elevating and or positioning devices specifically designed for supporting and positioning a LAUNCHER,GUIDED MISSILE,AIRCRAFT; LAUNCHER,TUBULAR,GUIDED MISSILE; LAUNCHER,MONORAIL,GUIDED MISSILE; and the like.

TEST SET SUBASSEMBLY,GUIDED MISSILE

A test set subassembly which forms a portion of a TEST SET,GUIDED MISSILE. In itself it is not a complete functioning item and cannot be assigned a more definite item name. Excludes TEST SET SUBASSEMBLY,GUIDED MISSILE COMPONENTS.

STAND SUBASSEMBLY,MAINTENANCE,GUIDED MISSILE

An item which is a part of a STAND,MAINTENANCE,GUIDED MISSILE such as a circular holder, frame, one or more trucks, and the like. Do not use if a more specific name applies.

STAND,MAINTENANCE,GUIDED MISSILE AND LAUNCHER

A supporting structure which may or may not have elevating and or positioning devices specifically designed for supporting and positioning a GUIDE MISSILE (as modified) and a guided missile launcher for maintenance and/or mounting purposes. Excludes STAND, MAINTENANCE, GUIDED MISSILE and STAND, MAINTENAMAINTENANCE, GUIDED MISSILE LAUNCHER.

TEST SET,GUIDED MISSILE AND LAUNCHING ASSEMBLY

A test set primarily designed for use in making examinations (as modified).

TEST SET GROUP,GUIDED MISSILE AND LAUNCHER

A test set group which is a subdivision of a complete TEST SET,GUIDED MISSILE AND LAUNCHER, but is not capable of performing a complete operational funchtion. Do not use if a more specific item name exists. Excludes TEST SET GROUP, GUIDED MISSILE.

COUPLING,GREASE GUN

The outlet member of a pressure greasing device, by means of which the device may be connected to a FITTING, LUBRICATION. It is threaded for attachment to a grease gun, pipe, hose fitting, or valve. The outlet is a nozzle, designed to mate with the lubrication fitting.

OILER,SELF-FEEDING

An oil reservoir having a needle valve, wick or other restriction in the discharge passage which delivers lube oil by gravity or capillary action to one or more points of a machine. See also OILER, AIRLINE; INDICATOR, SIGHT, LIQUID; AND CUP, OIL, LUBRICATING.

PUMP,LUBRICANT TRANSFER

A manual or power operated reciprocating pump, designed for transferring lubricants from a reservoir to a grease gun, measure, or similar items.

LUBRICATOR

An item which meters and delivers lube oil under pressure, at timed intervals, to one or more points of a machine.

NOZZLE,FUEL AND OIL SERVICING

FILTER UNIT,FLUID,PRESSURE

A machine designed to remove foreign particles and/or impurities from a fluid which is passed through an element of porous material or thin closely spaced disks. It includes a source of power and a circulating pump for forcing the fluid through the system under pressure.

SEPARATOR,OIL

An enclosed tank or vessel specifically designed to remove harmful solids, insoluble sludge and water by the force of gravity from continuous flow of contaminated oil. Exclude settling tanks.

PURIFIER,CENTRIFUGAL,OIL

A mechanical device containing a cylindrical vessel or bowl which rotates on its axis at a high rate of speed. Contaminated oil is injected under pressure and by means of centrifugal force the harmful solids, insoluble sludge and water are removed.

OIL GUN,PNEUMATIC

An item having an oil reservoir with a self-contained atomizer operated by air pressure to produce a fine spray or mist of oil.

SWIVEL,LUBRICATION LINE

A metal connection designed to be attached between, and to allow angular and/or circular movement between two items such as hose and valve or pipe and tubing in a lubricating line. Excludes swivel type items with more specializied functions, and such items a grease gun couplings, extensions and adapters.

CUP,OIL,JEWELER'S

An inkwell-like item with a cover, used as a reservoir for lubricating oil.

LUBRICATING UNIT,POWER OPERATED

A self-contained unit having one lubricant storage tank and an air or electrically operated pump, designed for the high pressure application of a lubricant to machinery. The unit may be mounted on wheel(s) or caster(s) and may be equipped with the necessary hose, control valve, and fittings.

LUBRICANT PACKER,BEARING

A device designed to evenly distribute and pack lubricant into the races and cages of anti-friction bearing. Excludes LUBRICATING GUN, HAND.

PUMP,BUCKET,LUBRICATING

A manually operated, self-contained, portable unit designed to deliver lubricant under pressure for application to automotive or industrial equipment and machinery.

EXTENSION,GREASE GUN

Consists of a COUPLING, GREASE GUN joined at its inlet end to a pipe or rigid tube; the coupling thus attaches to the gun by means of the pipe or tube, rather than directly. In this extended position the nozzle can be applied to hard-to-reach lubrication fittings.

DISPENSER,GRAPHITE

A hollow, compressible unit containing powdered graphite which is ejected through a nozzle or the like, when pressure is applied.

REEL,CABLE

A reel designed to accommodate wire, cord and/or cable. Excludes REEL, SOUND RECORDING WIRE. See also REELING MACHINE, CABLE (as modified).

SPOUT,HAND OILER

A hollow stem-like item, one end of which is adapted for attachment to hand oilers and the like, the other end may be fitted with a tip or nozzle. Excludes SPOUT, CAN, FLEXIBLE.

OILER,HAND

An item consisting of a metal or plastic refillable container having an integral or detachable spout, and may be gravity fed, force fed from a compressible surface, or force fed by pressure created by an internal pump. It is primarily designed for applying lubricating oil to moving parts of machinery. Excludes GUN, FLUID, DIRECT DELIVERY.

GREASE GUN,PNEUMATIC

An item having an air cylinder for developing high grease pressure for lubrication of bearing surfaces through pressure gun fittings. Air is supplied from a separate source. The item has a tube for grease stick application for a cylindrical body in which grease is stored. It may include the necessary hose or tube extensions, fittings and spare grease cylinders.

DEFLECTOR,DIRT AND LIQUID

An item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part.May or may notbe a mechanical device.

DISPENSING PUMP,HAND DRIVEN

A unit consisting of a pump, with intake pipe, and either spouts, hose, or other attachments specifically designed for transferring liquid fuels and lubricants from a drum, barrel, tank, or similar container.

DISPENSING PUMP,AUTOMOTIVE FUEL,SERVICE STATION

An item consisting of an electrically driven pump and a metering element, designed to be permanently connected by pipe to a supply source. It is normally used in service stations to refuel automobiles and trucks.

GREASE GUN KIT,PNEUMATIC

A kit consisting of high and/or low pressure air operated grease guns, power actuator, adapters, couplings and similar items. For items having an integral grease gun and power actuator, see GREASE GUN, PNEUMATIC.

LUBRICATOR KIT,BEARING

A group of items for packing lubricant into the races and cages of rollor and ball type bearings.

REPAIR KIT,LUBRICATOR COUPLER

A group of replacement parts for servicing the coupler of lubricating guns. It may contain necessary tools.

LUBRICATING AND SERVICING UNIT,POWER OPERATED

A self-contained maintenance unit. Usually consists of a lubricant storage tank and/or drums with air or electrically operated pump(s) designed for high pressure application of lubricant to machinery in the field. May include transporting vehicle.

PUMPING UNIT,PRESSURE LUBRICATING,DRUM MOUNTING

An item consisting of one or more air or electric motor driven pump(s), lubricant hose, control valves and adapters, designed to clamp on lubricant drum(s) for pressure application of lubricant to chassis and/or machinery. It may be furnished with dolly for mounting drum and may be equipped with pump hoisting device. See also LUBRICATING UNIT, HAND OPERATED.

GUN,FLUID,DIRECT DELIVERY

A device designed to supply lubricants or similar liquids by manual force feed to such parts as gear cases, shock absorbers, wet clutches, brake fluid master cylinders and the like. It may be used as a suction gun to drain gear cases and the like.

ADAPTER,GREASE GUN COUPLING

A grease conducting device, the inlet of which has the form of a lubrication fitting, to receive the nozzle of a COUPLING, GREASE GUN. The outlet end may have the form of a nozzle for engaging a FITTING, LUBRICATION, or it may be threaded for the attachment of such a nozzle. When complete with nozzle it serves to connect a grease gun coupling to a lubrication fitting of a different type, or adapts the coupling to a fitting which is otherwise inaccessible.

SEPARATOR,WATER,LIQUID FUEL

A self-contained unit designed to remove water from liquid fuel products. It usually consists of a tank with a removable head, inlet and outlet connections, water accumulator sump(s), water separating media, and necessary controls. Excludes FILTER-SEPARATOR, LIQUID FUEL.

OILER,JEWELER'S

An item designed to regulate the quantity of oil to be deposited on watch mainspring, pivot and/or jewel hole.

OILER SET,JEWELER'S

A group of OILER, JEWELER'S having different characteristics.

DAMPENER,FLUID PRESSURE

An automatic throttling device designed to absorb fluid pulsations and surges, thus reducing mechanical vibrations. Excludes DAMPENER, FLUTTER.

TANK AND PUMP UNIT,LIQUID DISPENSING,PORTABLE

A self-contained unit consisting of a storage tank with one or more power or manually operated pumps. The unit is used for transporting and dispensing liquid such as lubricating oils, cutting oils, coolant solutions, hydraulic fluids, and the like. Excludes TRAILER, TANK.

ADAPTER,PRESSURE FUEL SERVICING

A metallic device of variable configuration having a circular ingress orifice located in the greatest dimension. When inoperative, the orifice is sealed by a poppet valve held in position by a mechanical spring. It permits rapid replenishment of fuel storage tanks, or fueling of an aircraft or guided missile when the valve is depressed by the fueling nozzle or by another similar pressure fuel dispensing device.

REEL AND HOSE ASSEMBLY,LUBRICANT DISPENSING

A device primarily designed to supply automobiles, buses, motor trucks, and the like, with lubricant(s). It usually consists of a lubricant hose and a mechanical spring or compressed air actuated reel for retracting the manually extended hose. The hose is equipped with either a metering or nonmetering type discharge control valve on the service end. Excludes LUBRICATING UNIT, POWER OPERATED and LUBRICATING AND SERVICING UNIT, POWER OPERATED.

DRAIN UNIT,WASTE OIL,PORTABLE

An item designed to facilitate the draining and temporary storing of waste lubrication oil from vehicle engines and the like.

METERING GUN,LUBRICANT

A hand held item designed for attaching to the outlet end of a lubricant delivery hose to control and record the amount of lubricant dispensed.

LUBRICATING UNIT,HAND OPERATED

A pumping unit designed for application of lubricant from lubricant drum to automotive transmissions, differentials, and the like. It consists of a low pressure pump, usually with hose and nozzle. It may include a lubricant meter and dolly or hand truck for mounting and/or transporting the unit. For power operated items, see PUMPING UNIT, PRESSURE LUBRICATING, DRUM MOUNTING.

FUEL SERVICING UNIT,AIRCRAFT,TRAILER MOUNTED

A mobile item basically equipped with piping, hose, nozzle(s), valves, surge suppression equipment, etc., for controlling and dispensing fuel obtained from a permanently installed pressure fueling system having single or multiple outlets. Designed for rapid single point and/or overwing aircraft fueling. May be equipped with fueling hose reels or fuel filter(s) and meter(s).

HYDRANT REFUELING SYSTEM,AIR TRANSPORTABLE

A grouping of related items such as collapsible fuel storage tanks, pumps, filters and water separators, metering equipment, valves, fuel hoses, nozzles, trailers and the like. Specifically designed as air transportable for use by tactical organization where a rapid refueling capability of aircraft is required.

FUEL SYSTEM,SUPPLY POINT

A collection of items, such as fitting assembly sets, manifold units, nozzles, pumps, water separators and gasoline loading stands, and the like, necessary for bulk fuel handling at supply points to provide closeup support to elements in forward areas. Excludes FUEL SYSTEM, AMPHIBIOUS ASSAULT.

PARTS KIT,FUEL AND OIL SERVICING NOZZLE

FILTER-SEPARATOR,LIQUID FUEL

An item designed to remove water and solid particulates from contaminated liquid fuels. It consists primarily of a tank with a removable head or a pressure vessel containing electrodes and inlet connections, filtering elements, and may contain water accumulator sump(s), alternating electric fields, necessary flow controls, gages, and accessories. It is used in military aircraft and vehicular fueling and in military pipeline systems. Excludes SEPARATOR, WATER, LIQUID FUEL; and FILTER-SEPARATOR, LIQUID FUEL, TRAILER MOUNTED.

FILTER-SEPARATOR,LIQUID FUEL,TRAILER MOUNTED

A trailer mounted item designed to filter out solid material contaminants and separate water from liquid fuels. It consists primarily of a tank with a removable head, inlet and outlet connections, filtering elements, water separating media, water accumulator sump(s), necessary flow controls, gages, and accessories. The unit may be mounted on a two wheel or four wheel trailer.

FILTER-SEPARATOR-METERING UNIT,LIQUID FUEL,SELF-PROPELLED

A mobile self-contained unit designed to filter out solid material contaminants, separate free and entrained water from liquid fuels, and meter the fuel to and from aircraft, missiles, and the like. Consisting principally of a filter-separator, flow meter, associated flow control components, and auxiliary equipment, such as hose, hose rack(s) or reel(s), nozzle(s), and the like, permanently mounted on and driven by the power take-off of the prime mover. Used with air field fuel pipe line systems.

LUBRICATING UNIT,AIR PRIMED,PORTABLE

A self-contained unit consisting of a tank with a carrying strap, hose assembly and a LUBRICATING GUN, HAND. In the tank is a piston like separator above which lubricant is stored and under which compressed air is stored. The stored compressed air forces the piston up, pushing the lubricant through the hose to the LUBRICATING GUN, HAND.

PUMPING UNIT,CENTRIFUGAL,FUELING-DEFUELING

An assembled unit consisting of an electric motor driven pump(s), hoses, couplings, and other necessary accessories and attachments, utilized in fueling and defueling operations.

PARTS KIT,LUBRICANT PUMP

DRUM AND PUMP UNIT,LIQUID DISPENSING,TRACKED CARRIER MOUNTING

A unit consisting of a DRUM, FABRIC, COLLAPSIBLE and a PUMPING UNIT, CENTRIFUGAL, FUELING-DEFUELING to be mounted on a tracked carrier for the purpose of dispensing and transporting liquid petroleum products. The power source for the pumping assembly is furnished direct from the vehicle's electrical system.

ADAPTER KIT,GREASE GUN COUPLING

An adapter kit containing items such as adapters, bushings, couplings, nozzles, and swivels. It is used to connect the outlet member of a pressure greasing device to a lubrication fitting. See also ADAPTER SET, GREASE GUN COUPLING.

LUBRICATING GUN,HAND

A manually operated device designed to provide grease, oil, and the like under pressure through related fitting(s) to moving parts or areas requiring lubrication. Pressure for ejection of the lubricant is created by movement of a plunger or piston. Excludes GUN, FLUID, DIRECT DELIVERY and OILER, HAND.

FILTER,FLUID

A filter having inlet and outlet connections and designed to be connected in a pipe, tube or hose line. For spin-on, base-mounted filtering devices with integral outer casings, see FILTER ELEMENT, FLUID. Excludes AIR CONDITIONER.

PARTS KIT,AIR FLOW REGULATOR

SHOP EQUIPMENT,UTILITY,TRUCK MOUNTED

For use in conjunction with other motorized shops. Do not use if a more specific name is applicable.

PARTS KIT,LUBRICATING GUN

PARTS KIT,LUBRICATOR

A parts kit used to repair a LUBRICATOR.

PARTS KIT,SEPARATOR

A parts kit used to repair an air-oil separator or air-water separator.

PARTS KIT,SPRAY GUN

VENT UNIT,RELIEF

A spring loaded device equipped with automatic pressure and vacuum relief valves to relieve drum structure of excessive vapor pressure build-ups and provide for vacuum relief to facilitate liquid flow. It also serves as a filling unit with removable cap with chain attachment.

DRUM,HOSE REEL

An item designed to be used as a component to accommodate a hose. May be cylindrically shaped or narrow in width and greater in diameter. Item may have an opening passage to accommodate an inlet and/or outlet fitting.

REEL ASSEMBLY,HOSE

A circular device with flanged ends designed to accommodate a hose. May include components such as bracket(s), legs, hand crank, ratchet spring loaded device for automatic hose return, inlet and outlet ports for hose attachments. May be of high or low pressure and can be styled for floor, bench, service vehicle, trailer or ceiling mounted. Excludes WINCH, DRUM, (as modified).

ADAPTER SET,GREASE GUN COUPLING

A collection of various types and sizes of ADAPTER, GREASE GUN COUPLING. May include a display rack, container, or the like, for ease in selecting and storing the adapters. See also ADAPTER KIT (1), GREASE GUN COUPLING.

ROLLER ASSEMBLY,HOSE REEL

PARTS KIT,FLUID PRESSURE FILTER UNIT

EXTRACTOR,FUEL NOZZLE ADAPTER

A tee-handled device for removing a fuel nozzle adapter.

DRAINING KIT,FUEL

An item consisting of adapters, fittings, nozzles, vent pipes, hose assemblies, and the like, designed to facilitate draining fuel tanks. Excludes PROPELLANT DRAINING KIT, GUIDED MISSILE.

PARTS KIT,REEL ASSEMBLY,HOSE

A parts kit for a REEL ASSEMBLY, HOSE.

FORWARD AREA REFUELING EQUIPMENT

It is composed of a collection of items such as hoses, vials, fittings, nozzles, wyes, tees, and sundry accessories, filtering system, and pumping assembly (either gasoline, diesel, or turbine engine driven or electric motor driven with power source) utilizing 500 gallon, collapsible, fabric drums as the fuel source. It is used to refuel aircraft and is airlifted into a Forward Arming and Refueling Point (FARP) located immediately behind, in or forward of the main battle area. Excludes FUEL SYSTEM, SUPPLY POINT (FSSP).

REEL ASSEMBLY,STATIC DISCHARGE

An item consisting of a grounding reel and a definite continuous length of wire cable. Designed to be installed on mobile fuel equipment and other hazardous locations to reduce the possibility of sparks, explosions or fires caused by static electrical accumulations.

FRAME,HOSE REEL

A rigid item constructed of one or more segments, designed to be used with other components to contain and support the spool and hose weight and to maintain reel alignment.

FUEL SYSTEM,SHIP TO SHIP TRANSFER

A collection of hoses, nipples, wire ropes, hose coupling halves, cap with vent, lanyards/ropes, and the like. It is designed to transfer petroleum products such as diesel, heavy fuel, and the like at sea.

HANDLE GRIP,LUBRICATING UNIT

A pistol-shaped item made of metal or non-metal with or without selector valve which is mounted to the outlet end of a lubricant hose or unit and which controls the amount of lubricant to be dispensed.

HANDLE GRIP,OIL GUN

A pistol-shaped item for an OIL GUN, PNEUMATIC with an air compressor outlet and a metering equipment for spray agents. It may include a connection for the spray agent container.

TANK AND PUMP UNIT,FUEL DISPENSING,TRUCK MOUNTING

A unit consisting of a metal storage tank(s) and a pumping assembly. It is designed to be mounted on a truck for the purpose of dispensing and transporting liquid hydrocarbon fuel.

TANK UNIT,FUEL DISPENSING,TRAILER MOUNTING

A single self-contained tank unit consisting of a storage tank with accessories and fittings. It is to be mounted on a trailer for transporting and connecting to a power source for dispensing oils, hydraulic fluids, hydrocarbon fuel and the like.

REEL,HALF

The right or left part of a complete reel which is a component of a fluid dispenser.

DISPENSING PUMP,AIR PRESSURE

An item consisting of a pressure-driven pump equipped with intake and dispensing devices or other attachments. It is used for dispensing fluids from a tank, barrel or similar container. See also DISPENSING PUMP, HAND DRIVEN and DISPENSING PUMP, ELECTRICAL. Excludes DISPENSING PUMP, AUTOMOTIVE FUEL, SERVICE STATION.

FUEL UNIT SUPPORT ASSEMBLY

A major assembly of the tactical petroleum terminal which is used in the inland petroleum distrubution system. The fuel unit consists of 8 each 5000-barrel, callapsible fabric tanks and pumps, hoses, and manifolds necessary to receive or issue fuel from/to railcars and tanker trucks.

ADVANCE AVIATION FORWARD AREA REFUELING SYSTEM

An item specifically designed to provide refueling support for rotary wing aircraft. It consists of a fuel pump and holding tanks, hoses couplings and nozzles required for four refueling points. The pump provides filtered fuel at a rate of 55 GPM to each of the four refueling points simultaneously. The hoses allow refueling at a distance of 100 feet between aircraft. All items are stowed in containers designed for easy handling. The AAFARS may be manually carried from the transport vehicle/aircraft to the selected refueling site, where it is easy assembled. The item functions under all terrain and/or environmental conditions, including total darkness. Excludes FUEL SYSTEM, SUPPLY POINT (FSSP), and FORWARD REFUELING EQUIPMENT (FARE).

FILTER-LUBRICATOR ASSEMBLY,AIRLINE

A unit consisting of a pneumatic filter and an airline lubricator. It prevents dirt and moisture from entering air-operated equipment and at the same time provides proper lubrication to the equipment. A VALVE, REGULATING, FLUID PRESSURE and/or pressure gauges may be included with the assembly. For items which include the filter and regulating valve with no lubricator, see FILTER-REGULATOR ASSEMBLY, AIRLINE.

FILTER-REGULATOR,AIRLINE

A device consisting of a pneumatic filter and a pressure regulating valve usually assembled as an integral unit. The item is designed to remove foreign matter from the compressed air line and regulate the air flow, thus protecting the air operated equipment for which it is designed.

LUBRICATOR,AIRLINE

A device consisting of an oil reservoir, wick, or needle valve, line connections for an air inlet and outlet, and any additional features necessary for lubricating the working parts of air operated equipment on a compressed air line. For combination units, see also FILTER-LUBRICATOR ASSEMBLY,AIRLINE and FILTER-REGULATOR,AIRLINE.

FUEL DISPENSING UNIT,PRESSURE FEED,PORTABLE

A unit consisting of a flexible, nonmetallic, heavy-duty fuel container, valves, hose, and refueling nozzle. The unit is secured to the body of a military vehicle for the purpose of in-field refueling. Pressure to dispense the fuel is created by driving the tracks or wheels of a vehicle upon the fuel container. When empty, the container can either be folded and stored away, or refilled from a fuel tanker truck or stationary fuel source.

DISPENSING KIT,DRUM

A collection of items, such as adapters, fittings, nozzles, vent pipes, hose assemblies, and the like, designed to facilitate the draining of storage drums.

PARTS KIT,AIRLINE LUBRICATOR

A parts kit containing items used to service a LUBRICATOR, AIRLINE or a FILTER-LUBRICATOR ASSEMBLY, AIRLINE.

RESERVOIR,OIL,AIRLINE LUBRICATOR

An item designed as part of a LUBRICATOR,AIRLINE to store lubricating oil.

TANK UNIT,FUEL DISPENSING,TRUCK MOUNTING

A single self-contained tank unit consisting of a storage tank with accessories and fittings. It is to be mounted on a truck for transporting and connecting to a power source for dispensing oils, hydraulic fluids, hydrocarbon fuel and the like. Excludes: TANK UNIT, FUEL DISPENSING, TRAILER MOUNTING.

REFUELING SYSTEM,AVIATION TACTICAL TRUCK TANKER

A four station helicopter refueling system that consists of drybreak couplings, lightweight hoses and nozzles in sufficient quantity to allow safe operation of simultaneous refueling of multiple helicopters.

FUEL SYSTEM,AMPHIBIOUS ASSAULT

A grouping of related items, such as pumps, hoses, gages, valves, storage tanks, dispensing and manifold units, capable of receiving, transferring, dispensing and storing fuel for all types of vehicles used in an amphibious assault operation. Excludes FUEL SYSTEM,SUPPLY POINT.

FILTER-ABSORBER,LIQUID FUEL

An item mounted in a chain filtration system used as a finishing filter after a FILTER-SEPERATOR,LIQUID FUEL. it removes water from the liquid fuel by a chemical substance that gels. it also removes solid particles from the liquid fuel: EXCLUDES: FILTER-SEPERATOR,LIQUID FUEL

FILLING SET,OIL

A set consisting of a filter, ring(s), fitting(s), and the like, and used to fill an oil system during maintenance and/or repair.

BACKPACK,LIQUID DISPENSING UNIT,PORTABLE

An open structure with shoulder straps and or a waist strap and designed to accomodate a TANK AND PUMP UNIT, LIQUID DISPENSING, PORTABLE.

FILTER ELEMENT,COALESCER,FILTER-SEPARATOR,LIQUID FUEL

A replaceable device of a FILTER-SEPARATOR, LIQUID FUEL designed to remove solid particles from liquid fuels and gather dissolved water into droplets.

FUEL SYSTEM,MODULAR

A collection of subsystems necessary to receive, store, filter and dispense fuels. The components may consist of tank racks, pump racks with filter separators and associated equipment. The racks are modular in design for portability.

SPOUT,FUEL AND OIL SERVICING NOZZLE

A tubular item, straight or bent, one end of which is designed for attachement into the body of a NOZZLE, FUEL AND OIL SERVICING.

INJECTOR,FUEL ADDITIVE

An item that introduces an appropriate amount of fuel additive from the fuel additive reservoir into a fuel system, a drum or the like. May include injector, control panel, tank, sample probe, gear reducer and pump subassemblies.

FLANGE,HOSE REEL DRUM

An item usually flat and circular which is mounted on the two sides of a DRUM, HOSE REEL to constitute a REEL ASSEMBLY, HOSE. Excludes FLANGE, REEL, CABLE.

PARTS KIT,CENTRIFUGAL OIL PURIFIER

A parts kit used for maintenance of a PURIFIER,CENTRIFUGAL,OIL. May include replacement belt, gasket and grease.

MECHANICAL FUSE

An item of various shapes and material, sized to rupture, shear and the like under the action of a predetermined mechanical force. It protects against mechanical damage and/or releases a mechanism.

TEST SET,FIRE CONTROL SYSTEM

A test set primarily designed for use in making examinations of a fire control system. Excludes TEST SET, BOMB DIRECTOR.

TEST SET,SYNCHRO

A test set primarily designed for use in making examinations of the operation of synchros, such as measuring the accuracy of angular motion. See also TRANSFORMER, SYNCHRO OVERLOAD.

ADAPTER,TEST

An adapter which provides facilities for electrically connecting an item to be tested and a piece of test equipment. Do not use for interconnecting cables. Includes plug-in electronic component socket adapters which provide terminations for dynamic testing while an electronic component is inserted. See also COUPLER, TEST SET.

SCALE,RANGE,COMPUTER

A flat circular interchangeable item, graduated in common units of linear measurement, which is designed to be mechanically secured to a simulated computer output shaft. It is used in conjunction with an electro-mechanical test fixture to check the accuracy of, and/or calibrate, the superelevation output data with the known input data of a COMPUTER, BALLISTICS, or the like. For items not attached to a moving element, see DIAL, SCALE.

ALIGNMENT DEVICE,OPTICAL GUN BORE

A device utilizing a cross-hair reticle for alignment of the axis of a gun bore with the line of sight of an optical instrument. It may be designed for use under all weather conditions. Excludes BORESCOPE; and COLLIMATOR (as modified).

ELECTRONIC UNIT,LASER RANGING

A group of components in a single unit designed to be used with a CONTROL (2), COMMANDERS SIGHT AND RECEIVER-TRANSMITTER, LASER RANGING. It contains electronic circuitry that serves as a pulse forming network to generate and control voltages for a flash tube (which stimulates a ruby rod in the laser cavity). It also cantains range counters (electronic), range storage, and portions of the built-in test circuitry (performs internal checks to show that the laser, range finder is functioning correctly). In addition, it contains protective circuitry to guard against severe voltage changes.

TEST SET,FIRE CONTROL SUBSYSTEM

A test set primarily designed for use in making examinations of a fire control subsystem. Excludes TEST SET, FIRE CONTROL SYSTEM.

BORESIGHT KIT,HELMET SIGHT ASSEMBLY

A group of items consisting of a waterproof container, boresight tool and a power supply cable assembly. It is specifically designed to align the verticle line of sight of the optical aiming system.

TEST STATION,AIR DEFENSE GUN ELECTRONIC SYSTEM

A group of items containing a console and peripheral equipment specifically designed for use in testing air defense gun electronic systems. A controlled environment is required. It does not have repair capabilities. Excludes SHOP EQUIPMENT (1), AIR DEFENSE GUN ELECTRONIC SYSTEM. See also TEST STATION, AIR DEFENSE GUN ELECTRONIC SYSTEM, SEMITRAILER MOUNTED.

TEST STATION,AIR DEFENSE GUN ELECTRONIC SYSTEM,SEMITRAILER MOUNTED

A van type mobile unit which houses a console and peripheral equipment specifically designed for use in testing air defense gun electronic systems. It must have a controlled environment and an internal or external power source. It does not have repair capabilities. Excludes SHOP EQUIPMENT (1), AIR DEFENSE GUN ELECTRONIC SYSTEM, SEMITRAILER MOUNTED.

SHOP EQUIPMENT,AIR DEFENSE GUN ELECTRONIC SYSTEM,SEMITRAILER MOUNTED

A van type mobile unit which houses a group of items, not all having the same basic name, specifically designed to repair prediagnosed defects in air defense gun electronic systems. It provides workspace and must have a controlled environment and an internal or external power source. Excludes TEST STATION, AIR DEFENSE GUN ELECTRONIC SYSTEM, SEMITRAILER MOUNTED.

SHOP EQUIPMENT,AIR DEFENSE GUN ELECTRONIC SYSTEM

A group of items specifically designed to repair prediagnosed defects in air defense gun electronic systems. It provides work benches and must have a controlled environment. Excludes TEST STATION, AIR DEFENSE GUN ELECTRONIC SYSTEM. See also SHOP EQUIPMENT (1), AIR DEFENSE GUN ELECTRONIC SYSTEM, SEMITRAILER MOUNTED.

SHOP EQUIPMENT,FIRE CONTROL SYSTEM

TEST STATION,AIR DEFENSE GUN OPTICAL-MECHANICAL SYSTEM

A group of items containing multiple consoles and peripheral equipment specifically designed for use in testing air defense gun optical-mechanical systems. A controlled environment is required. It does not have repair capabilities.

TOOL AND EQUIPMENT KIT,AIR DEFENSE GUN

A group of items specifically designed to perform maintenance on the air defense gun. It may include a limited quantity of common and/or specialized tools and equipment to perform a specific operation.

SHOP EQUIPMENT,AIR DEFENSE GUN

TEST STATION,AIR DEFENSE GUN POWER UNIT

A group of items containing a console, prime power unit test stand, load bank and the like specifically designed for use in testing an air defense gun power unit.

FIXTURE,BORESIGHT,PORTABLE

A structure consisting of borescopes, support frames, alignment blocks and the like, with portable case for carrying disassembled components, designed to provide and maintain alignment of weapons systems in a common attitude to a helicopter telescope sighting.

TEST SET,PROGRAM,AIR DEFENSE GUN

A group of instruments including computer software designed to be mounted and/or connected to a test station, to provide the testing of any of the components of the air defense gun. May be included in a test station. Does not include a computer. It modifies a test set for a specific function.

TEST SET,SIMULATOR SYSTEM,LASER

A portable test set which can be used for fault - isolation/testing all MILES (Multiple Integrated Laser Engagement Systems) mounted in air/ground vehicles.

TOOL AND EQUIPMENT KIT,OPTICAL INSTRUMENT

A group of items specifically designed to perform maintenance on an optical instrument.

CASE,COLLIMATOR SET

A portable case designed to hold COLLIMATOR SET (as modified). For single collimators see CASE (2), OPTICAL INSTRUMENT or CASE (2), SURVEYING INSTRUMENT.

PROGRAMMER,MICROCIRCUIT

A device used to imprint information on a microcircuit including EPROMS and single chip microcomputers. The device may also edit, verify and/or erase existing programmed microcircuits. The device may include remote controls and associated software packages.

MODIFICATION KIT,MAINTENANCE AND REPAIR SHOP EQUIPMENT

An item or items employed to modify specially designed maintenance or repair shop equipments.

MASK,OPTICAL INSTRUMENT

A thin metallic or nonmetallic plate which has an opening of a specific size. Its function is to limit the field of view of a telescope, periscope or the like by blocking peripheral light or images. Excludes MASK, LANTERN SLIDE, PHOTOGRAPHIC.

TEST SET SUBASSEMBLY,FIRE CONTROL EQUIPMENT

TEST SET,HELMET UNIT,INTEGRATED

A test set primarily designed for use in making examinations of a HELMET UNIT, INTEGRATED. It may or may not incorporate a built in or internal reliability tester to determine the functionality of the test set.

SUPPORT,ADJUSTABLE,TEST FIXTURE

An item which holds a piece in various positions within a single plane for a test fixture. Excludes HOLDER, MAINTENANCE FIXTURE, MULTIPOSITION.

INSTALLATION KIT,SHOP EQUIPMENT

An installation kit to adapt a SHOP EQUIPMENT (as modified) in a container, trailer, semitrailer, shelter or the like.

HOLDER,TEST EQUIPMENT,FIRE CONTROL INSTRUMENT

An item specifically designed to accomodate a fire control instrument or tester during handling. It may have clamping or locking devices to retain the held item when it is moved from a vehicle to a test bench and back. Detachable handles, lifting eyes, and the like may be provided, Excludes HOLDER, MAINTENANCE FIXTURE, MULTIPOSITION and FIXTURE (1), (as modified).

FIXTURE,TEST,FIRE CONTROL INSTRUMENT

A fixture designed to position a fire control instrument for testing and calibration. Excludes FIXTURE (1), TEST, OPTICAL INSTRUMENT.

ALIGNMENT SET,FIRE CONTROL EQUIPMENT

A collection of items not all having the same name which aligns a cupola mounted weapon such as a machine gun with an optical fire control device such as a periscope. Some items are mounted temporarily on the weapon while other items are mounted on the fire control device. The equipment may be provided with a chest for shipping and storage.

CASE,TEST EQUIPMENT,FIRE CONTROL

A case specifically designed to store and carry the special tools and test equipment of the fire control equipment.

DRAWER,ELECTRICAL TEST SET ADAPTER

An item designed to fulfil a partial function in an ADAPTER (2), TEST which is constructed as a drawer unit. The item is not functional without other drawer units.

TEST DEVICE,INTERFACE

An item designed as a test aid for the extended selftesting of interface signals in connector plugs and circuit cards.

ADAPTER SUBASSEMBLY,ELECTRICAL TEST SET

An item which is a subassembly of an Adapter, Electrical Test Set and cannot be assigned a more definite item name.

COLLIMATOR,TELESCOPE

A small, tubular item utilizing an eyepiece, cross hair reticle, and an objective lens, to align the optical axis to the mechanical axis of a telescopic instrument. It does not have the viewing power of a telescope. It may have two like items secured in a common holder for simultaneous checking of a dual optical system.

COMPUTER ERROR EVALUATOR

An item that contains a meter for indicating the percentage of time that a computer vector is under a given preset distance. It also contains controls and switches for monitoring purposes during testing of a computer.

TEST BENCH SET,FIRE CONTROL SYSTEM

A complete electronic set for testing, by the substitution method, the components of a fire control system. The item consists of two or more test benches on which are mounted operable fire control system components, and includes provisions for the application of electrical operating power. Components of a fire control system are systematically substituted for the test bench component until the defective system component is located.

COLLIMATOR SET,ALIGNMENT

A fixed number of components and/or items, not all having the same basic name, which are specifically designed for checking the alignment of a boresight-type fixture.

TEST SET,LASER RANGE FINDER

A test set specifically designed for use in making examination of a laser range finder, including electronic components and circuits. Excludes individual test sets designed for a specific function.

TESTER,RECEIVER-TRANSMITTER,LASER

A unit designed to measure the transmitter output energy and the receiver sensitivity of a laser receiver-transmitter.

CASE,TEST EQUIPMENT,LASER RANGE FINDER

A case specifically designed to store and carry the special tools and test equipment of the laser range finder.

PLUG-IN UNIT,ELECTRICAL-ELECTRONIC TEST EQUIPMENT

An electronic subassembly designed to be plugged into one or more basic pieces of test equipment to extend the capabilities of the basic instrument. The basic instrument cannot function without one or more plug-in units (as required) in position.

PRESSURIZING-PURGING DEVICE,LASER DESIGNATOR

A combination of equipment and accessories to perform maintenance on and pressurize the LASER DESIGNATOR MODULE. This item can also purge components of the module to remove moisture and contamination.

ALIGNMENT VERIFICATION ASSEMBLY

A device utilizing a cross hair reticle to verify alignment of fire control sensors and helmet display unit receiver with an integrated helmet or to verify alignment of a helmet fire control optics assembly. Has mounts specifically built to adapt to a HELMET UNIT, INTEGRATED or helmet optics assembly.

CHARGING AND TESTING UNIT,NITROGEN

A mobile unit used to charge and test an item (infrared equipment, guided missile, guided missile shipping and storage container and the like) containing nitrogen. It allows one to verify nitrogen pressure and may analyze the item using a nitrogen scan. It can be reloaded from a source containing nitrogen such as a bottle or the like.

MAINTENANCE KIT,FIRE CONTROL EQUIPMENT

A maintenance kit of fire control equipment which may consist of one or more CABLE ASSEMBLY,SPECIAL PURPOSE,ELECTRICAL; DUMMY CONNECTOR,PLUG; SHACKLE; or the like. It may or may not include a carrying case.

CASE,MAINTENANCE EQUIPMENT,FIRE CONTROL

A case specifically designed to store and carry maintenance equipment of fire control equipment.

ADAPTER,TEST

An adapter which provides facilities for electrically connecting an item to be tested and a piece of test equipment. Do not use for interconnecting cables. Includes plug-in electronic component socket adapters which provide terminations for dynamic testing while an electronic component is inserted. See also COUPLER, TEST SET.

CASE,BREECH BORE SIGHT

CASE,GUN RECOIL SPRING COMPRESSOR

CASE,TEST SET

REEL,CABLE

A reel designed to accommodate wire, cord and/or cable. Excludes REEL, SOUND RECORDING WIRE. See also REELING MACHINE, CABLE (as modified).

CHEST,RECOIL MECHANISM EXERCISER

CHEST,RECOIL MECHANISM-EQUILIBRATOR CHARGING REGULATOR

TOOL SET,ORDNANCE BALLISTIC AND TECHNICAL SERVICE TEAM

SIGHT,BORE,BREECH

A sighting device, usually a disk or segment with a central peephole, so designed to fit in the breech end of the gun tube for the purpose of aligning the sights with the gun.

SIGHT,BORE,MUZZLE

A sighting device consisting of (1) a string and a web belt which is attached to the outside of the muzzle end of the tube, or (2) a disk, with a central peephole, which is inserted in the bore, or (3) a short piece of tubing, with cross lines, which is inserted in the bore of a cannon.

REPAIR KIT,FIELD ARTILLERY MAINTENANCE

A repair kit designed for the maintenance of light, medium, and heavy artillery guns and howitzers.

EXERCISER,RECOIL MECHANISM

An item specifically designed for exercising hydropneumatic recoil mechanisms. It usually consists of a power unit, a hydraulic system and a control system. It may be trailer mounted.

HOLDING TOOL,BREECHBLOCK

A specially designed metallic item used to support the breechblock of an artillery weapon during assembly and disassembly.

REMOVER,ARTILLERY CARTRIDGE

An item specifically designed to remove cartridge(s) from the automatic loader of an artillery weapon.

QUADRANT,FIRE CONTROL

A mechanical device having scales graduated in mils, with a fine micrometer adjustment(s) and a leveling and/or a cross-leveling vial(s). It may be physically attached to the gun, gun mount, or gun carriage and is used for setting and/or measuring the elevation angles of a weapon.

LINK,HOISTING

A rigid item which is less than three times as long as it is high. It includes an eye(s), ring(s), hole(s), loop(s), or the like, to facilitate hoisting and is designed to permit attaching such items as sling legs, shackles, rods, and hooks at two or more points. May include mounting hardware such as bolts, screw, washers and the like. Excludes SPREADER, SLING. See also BEAM, HOISTING. Do not use if a more specific name applies, such as RING, CONNECTING, ROUND and LINK, CHAIN, END.

SUPPORT,BORESCOPE TUBE

An item designed to be mounted around and secured to the main tube and extension tube(s) of a BORESCOPE to center and balance it in a cannon bore.

REFLECTOR,GUN BARREL

An L-shaped housing designed for insertion into the barrel of a gun, such as a rifle, machine gun, or the like. An integral mirror provides a reflecting surface for visual inspection of the surface of the barrel interior. Excludes BORESCOPE; HOLDER, MIRROR; and HOLDER, REFLECTOR.

REGULATOR,CHARGING,RECOIL MECHANISM-EQUILIBRATOR

A manually operated device designed for accepting compressed nitrogen gas from a cylinder and to deliver it to a recoil mechanism or an EQUILIBRATOR, CANNON. It has an outlet connection controlled by a needle valve. A bleeder valve is provided for purging purposes and there is a threaded projection for the attachment of a pressure gage. Excludes REGULATOR, PRESSURE, COMPRESSED GAS.

ADAPTER,OIL PUMP TO RECOIL MECHANISM

ADAPTER,PRESSURE GAGE TO RECOIL MECHANISM

ADAPTER,RECOIL MECHANISM-EQUILIBRATOR CHARGING REGULATOR

SHIELD,SAFETY,RECUPERATOR

A disk-shaped concave metal item with a center hole designed to fit over the end of a recuperator cylinder on a recoil mechanism. It is used to protect the operator from escaping gases when the recuperator is being charged with compressed gas.

TARGET,BORESIGHTING

A paper, plastic and/or metal item of square or rectangular shape designed as an aiming point to be used in bore sighting a gun to bring the axis of the barrel of a spotting pistol, spotting rifle, subcaliber rifle and/or telescope sight(s) into coaxial alignment with the center line of a cannon tube or artillery trainer barrel. It usually consists of a series of quartered circles printed on a white background with alternate quadrants printed in black. Crosses, center lines and other appropiate sighting marks may also be included.

COMPRESSOR,GUN RECOIL SPRING

An item specifically designed to facilitate the compression and decompression of the helical spring(s) in equilibrators, recoil and counter-recoil cylinders, and recuperators on an artillery weapon.

SIGHT,BORE,OPTICAL

A telescopic device which utilizes a boresighting reticle, used to align the axis of a weapon bore with a target. It is secured to the exterior or interior of a weapon barrel or tube. It includes a MOUNT, TELESCOPE with a strap and clamp assembly for exterior mounting, or an expansion sleeve adapter for internal mounting. Excludes SIGHT, BORE, BREECH; SIGHT, BORE, MUZZLE and SIGHT, BORE, OPEN.

EXTRACTOR,RUPTURED CARTRIDGE CASE

A hand operated mechanical maintenance device designed for removing a ruptured case out of the chamber of a gun, rifle, or the like.

TARGET ASSEMBLY,BORESIGHT ALIGNMENT

A device which utilizes two small disc targets to check the boresighting adjustments of the telescopes mounted on a weapon, without the aid of a test target or distant aiming point.It consists of an expansion mandril which is inserted into a gun tube, and a hinged arm to which the targets are secured. The arm protrudes from the muzzle of the weapon at a right angle to the weapon tube, and may be used on weapons equipped with, or without a muzzle brake.

BORESIGHTING EQUIPMENT,WEAPON

An item consisting of a combination of various devices designed to bring the bore axis into parallel alignment with the line of sight of the aiming system. It may include a target sighting disk.

SHOP EQUIPMENT,ANTIAIRCRAFT ARTILLERY

SHOP EQUIPMENT,ARTILLERY

Excludes SHOP EQUIPMENT (1), ANTIAIRCRAFT ARTILLERY.

SHOP EQUIPMENT,SMALL ARMS

TEST STATION,AIR DEFENSE GUN POWER UNIT

A group of items containing a console, prime power unit test stand, load bank and the like specifically designed for use in testing an air defense gun power unit.

TEST SET,PROGRAM,AIR DEFENSE GUN

A group of instruments including computer software designed to be mounted and/or connected to a test station, to provide the testing of any of the components of the air defense gun. May be included in a test station. Does not include a computer. It modifies a test set for a specific function.

TEST SET,AIR DEFENSE ARTILLERY

A test set primarily designed for use in making examinations of electronic equipment for carriage and mount.

MODIFICATION KIT,MAINTENANCE AND REPAIR SHOP EQUIPMENT

An item or items employed to modify specially designed maintenance or repair shop equipments.

MASK,OPTICAL INSTRUMENT

A thin metallic or nonmetallic plate which has an opening of a specific size. Its function is to limit the field of view of a telescope, periscope or the like by blocking peripheral light or images. Excludes MASK, LANTERN SLIDE, PHOTOGRAPHIC.

MAINTENANCE FIXTURE,WEAPON

A device for temporarily supporting and holding weapons in the correct position during maintenance, adjustment or testing.

CHECK WEIGHT,TRIGGER

An item designed for checking the trigger pull-off of weapons.

TEST SET,GUN TUBE

A collection of items such as star gaging equipment, control unit, visual display unit, output data unit, interconnect cable and the like, as designed for the inspection of bore interfaces of large-caliber gun tubes and for identification, measuring and marking of damages resulting from the firing load. Includes generation of a test protocol by the output data unit.

SHOP EQUIPMENT,AIR DEFENSE ARMAMENT MOBILE REPAIR,TRAILER MOUNTED

A trailer which houses a group of items, not all having the same basic name, specifically designed to repair prediagnosed defects in air defense armament systems. It provides workspace and can have a controlled environment and an internal or external power source.

INSTALLATION KIT,SHOP EQUIPMENT

An installation kit to adapt a SHOP EQUIPMENT (as modified) in a container, trailer, semitrailer, shelter or the like.

SHIELD,SPLASH,LIQUID

A disk-shaped concave item with a center hole designed to fit around a cylindrical shaped item. It is used to protect the operator from backsplash when transferring liquids.

INSPECTION SET,CANNON BARREL

An item designed to video record the inner barrel and transmit data to a control unit.

DRAWER,ELECTRICAL TEST SET ADAPTER

An item designed to fulfil a partial function in an ADAPTER (2), TEST which is constructed as a drawer unit. The item is not functional without other drawer units.

ADAPTER SUBASSEMBLY,ELECTRICAL TEST SET

An item which is a subassembly of an Adapter, Electrical Test Set and cannot be assigned a more definite item name.

TEST SET,ROCKET LAUNCHER

A test set specifically designed for use in making examinations of a rocket launcher performance capabilities. For items used in making examinations of electrical circuits on a rocket launcher, see TEST SET, ELECTRICAL CIRCUIT, ROCKET LAUNCHER.

ADAPTER SET,TEST

A grouping of items consisting of two or more ADAPTER (2), TEST. May include a mounting, or other facility for storage and rapid access to individual adapters.

TARGET,BORESIGHT ALIGNMENT

A circular disc, usually metallic, which has alternate solid and cut-out quadrants. It is specifically designed to fit a cell used to bore sight a target. Excludes TARGET, BORESIGHTING.

TEST SET,ELECTRICAL CIRCUIT,ROCKET LAUNCHER

A test set primarily designed for use in making examinations of electrical cables, wiring continuity, relay operations, switching positions, and the like in a rocket launcher.

CLEANING TOOL,BARREL BEARING

A metallic item, designed to clean and remove carbon from the barrel bearing of a weapon. It may have a tee handle, wrenching flats or the like, for the purpose of rotating.

BORE LIGHT SYSTEM,LASER

A device used to align various sightings to different weapon systems without discharge of the weapon under daylight, low light or dark conditions. Components may include laser borelight, target, battery, carrier, distant gage and interfaces.

PLUG-IN UNIT,ELECTRICAL-ELECTRONIC TEST EQUIPMENT

An electronic subassembly designed to be plugged into one or more basic pieces of test equipment to extend the capabilities of the basic instrument. The basic instrument cannot function without one or more plug-in units (as required) in position.

FIXTURE,WEAPON COMPONENT MAINTENANCE

A device specifically for holding weapon components or pieces during maintenance, adjustment or testing.

STAND,MAINTENANCE,MACHINE GUN

An item used to support a large caliber MACHINE GUN (as modified) during maintenance or repair. Item may include towbar or casters. For items used to adapt, see MOUNT or ADAPTER as modified.

LID,TEST SET CASE

An item of various shapes and material designed to enclose the top portion of a CASE (2), TEST SET. It is mounted to the case by means of bolts, clamps, latches, or the like.

HAND TOOL KIT,ROBOTIC SYSTEM

A collection of hand tools used by a robotic system for remote reconnaissance of unexploded ordnance and improvised explosive devices. One or more tools may be mounted on a universal gripper block that is attached to the system gripper for use. Tools may include a rake and wire trace attachment, a knife assembly, spear attachment and associated stabilizing hardware. The kit may include the universal gripping block and case.

CHAMFER TOOL,BARREL

A tool used to help shape the muzzle crown, especially before installation of a new flash suppressor.

HAND TOOL KIT,UNMANNED VEHICLE

A collection of hand tools used by a robotic system for remote reconnaissance of unexploded ordnance and improvised explosive devices. One of more tools may be mounted on a universal gripper block that is attached to the system gripper for use. Tools may include a rake and wire trace attachment, a knife assembly, spear attachment and associated stabilizing hardware. The kit may include the universal gripping block and case.

SIMULATOR,GYROSCOPE SIGNAL

An item whose electrical output provides synthetic signals similar to those produced by a gyroscope(s).

CHOCK,TORPEDO

A rectangular shaped item of wood or other suitable material, generally with one or more grooves and/or inserts on one face to ensure a snug fit, used for cradling torpedoes on ships, shore bases and the like.

LEVEL,TEST STAND

A device which utilizes a VIAL, LEVEL. It is used for leveling, adjusting and setting angles for test stand of which it is a component part.

TEST SET,TORPEDO

A test set primarily designed for making examinations of a torpedo and/or other components.

TEST STAND,TORPEDO,WARSHOT

A unit equipped with the necessary equipment designed to test the performance and operational characteristics of a TORPEDO, WARSHOT.

MODIFICATION KIT,MAINTENANCE AND REPAIR SHOP EQUIPMENT

An item or items employed to modify specially designed maintenance or repair shop equipments.

TOOL AND EQUIPMENT KIT,TORPEDO

SHOP EQUIPMENT,TORPEDO

REPAIR KIT,TORPEDO

TEST SET SUBASSEMBLY,TORPEDO COMPONENTS

MAINTENANCE KIT,TORPEDO

A maintenance kit for components of torpedoes.

TEST SET,DEPTH CHARGE

INC 34860 REINSTATED ON 110317~A collection of items designed for use in making examinations of a depth charge or components of it.

TEST SET,UNDERWATER MINE

A test set primarily designed for use in making examinations of a MINE, UNDERWATER or components of it.

ADAPTER,TEST SET,UNDERWATER MINE

An item which is designed to connect a TEST SET, UNDERWATER MINE with mine components which are to be tested.

MAINTENANCE FIXTURE,UNDERWATER MINE

A device for temporarily supporting and holding a MINE, UNDERWATER and/or the components thereof during assembly, disassembly, repair and/or test.

PROGRAM SET,UNDERWATER MINE

A device for the input of tactical parameters into the central computer memory of an underwater mine.

PROGRAMMER-TEST STATION,UNDERWATER MINE

An item for testing the function of underwater mines and mine components. Auditing of the entire test is performed by a printer. After testing, the firing device base program is loading into the computer of the underwater mine. The item consists of a TEST AND PROGRAM SET, UNDERWATER MINE, a printer, monitor and the requisite accessories.

TEST AND PROGRAM SET,UNDERWATER MINE

An item for testing the function of an underwater mine and/or its components. After testing, the firing device base program is loaded into the computer of the underwater mine. The item is part of a PROGRAMMER-TEST STATION, UNDERWATER MINE.

TOOL AND EQUIPMENT KIT,UNDERWATER MINE

SHOP EQUIPMENT,UNDERWATER MINE

REPAIR KIT,UNDERWATER MINE

TEST SET SUBASSEMBLY,UNDERWATER MINE

A test set subassembly which forms a portion of a TEST SET (1), UNDERWATER MINE. In itself it is not a complete functioning item and cannot be assigned a more definite item name.

PROGRAMMER-TEST STATION SUBASSEMBLY,UNDERWATER MINE

Different types of items having a common mounting or mounted on each other which form part of a PROGRAMMER-TEST STATION, UNDERWATER MINE. In themselves, they are not complete functioning items and cannot be assigned to a more definite item name.

BAG,PROGRAM SET,UNDERWATER MINE

An item made of heavy duck, medium-weight coated cloth or similar flexible material and designed for carrying a PROGRAM SET, UNDERWATER MINE. Carrying straps or other carrying devices may be included.

MAINTENANCE SUPPORT EQUIPMENT,UNMANNED WATERCRAFT

The maintenance support equipment is used in launch and recovery operations, maintenance and repair actions, and during loading and unloading of a mine detection, classification, and localization sensor from the unmanned semi-submersible vehicle.

TEST SET,ELECTRIC SQUIB

A test set primarily designed for use in making examinations of SQUIB, ELECTRIC.

PROTECTOR,BOMB PARACHUTE

A device designed to prevent damage to a parachute during installation in a bomb.

TEST SET,RADAR FUZE

A test set specifically designed for use in making examinations of radar fuzes.

STAND,RADAR FUZE

An item designed to support a FUZE, RADAR during assembly, disassembly and/or testing.

REPOSITIONING MACHINE,LINKED CARTRIDGE

A lightweight, hand-operated machine used to accurately reposition misaligned or loose cartridges in link belts.

DELINKER,POWERED

A power operated machine designed to remove cartridges from webbed belts and/or metallic link belts.

FEEDER,AMMUNITION

An item designed to supply uniform quantities of cartridges and/or projectiles from hoppers to conveyers by means of a vibrating tray, plate or chute.

TEST SET,CONTINUITY,IGNITER CIRCUIT

A test set calibrated in ohms, designed to measure the continuity of the electro-explosive igniter circuits used in missiles, jettisoning equipment, and the like.

SHOP EQUIPMENT,AMMUNITION

SHOP EQUIPMENT,AMMUNITION RENOVATION

A collection of tools, accessories, and equipment required for restoration of ammunition to a serviceable condition, usually by replacement of components.

TEST SET,ELECTRICAL CIRCUIT,AMMUNITION DISPENSER

A test set primarily designed for use in making examinations of the electrical circuits of the ammunition dispensers of DISPENSER AND BOMB, AIRCRAFT; DISPENSER AND MINE, AIRCRAFT and/or the like prior to loading with ammunition.

SUPPORT,LINKER

An item designed to hold, support and carry a hand or powered linker on a vehicle, weapon or work bench in the proper position.

TEST KIT,HIGH EXPLOSIVE CUTTER

A collection of items such as testing machines, designed for testing high explosive cutters for leakage and proper function, and additional accessories required to test the application and proper function of a high explosive cutter or parts thereof.

TESTING MACHINE,LEAKAGE,HIGH EXPLOSIVE CUTTER

A mechanical device consisting of a pump unit and a transparent container accommodating high explosive cutters. The item is designed for testing the fuze and the frame of a high explosive cutter for leakage under vacuum pressure.

TESTING MACHINE,DIAPHRAGM-PISTON,HIGH EXPLOSIVE CUTTER

A mechanical device which examines the diaphragm for leakage and the piston of a high explosive cutter for proper function.

TEST SET,REMOTE CONTROL FUZE

A test set specifically designed for examinations of proper function and ignition-safety of a remote control fuze.

LOADER,BOX MAGAZINE,AMMUNITION

A mechanical device which loads ammunition into a vehicle-or-aircraft-mounted magazines. The device may have linking capability and may be reversible for unloading and delinking ammuntion.

TOOL AND EQUIPMENT KIT,AMMUNITION DISPENSER SET

A group of items specifically designed to perform maintenance on an Ammunition Dispenser Set.

LOADING SYSTEM,AMMUNITION

An item consisting of an ammunition autoloader and advanced ammunition packaging. It can be programmed to perform all loading/unloading functions using either fixed or separated ammunition. It has a hull storage area for ammunition.

TEST SET,LEAKAGE,AMMUNITION PACKAGE

A collection of items for leakage testing of transport and storage containers, ammunition containers and other types of ammunition packages containing ammunition. The tightness of ammunition packages is determined by measuring the pressure-drop over a fixed period of time.

CHAMBER,PRESSURE,PROPELLANT TEST KIT

A hollow body sealable to be gas-pressure-tight and equipped with a sensor designed for detecting the gas pressure of burning PROPELLANT POWDER; PROPELLANT GRAIN; liquid propellants or similar substances and converting it into electric signals which are subsequently transferred to a PROCESSOR AND RECORDING DEVICE, PROPELLANT TEST KIT. The item is part of a TEST KIT, PRESSURE-TIME CURVE, PROPELLANT.

TEST KIT,PRESSURE-TIME CURVE,PROPELLANT

A collection of items such as CHAMBER PRESSURE, PROPELLANT TEST KIT and PROCESSOR AND RECORDING DEVICE, PROPELLANT TEST KIT designed for testing and recording the gas pressure of burning PROPELLANT POWDER; PROPELLANT GRAIN liquid propellants or similar substances over a specific period of time and/or for determining the quickness of propellants.

DEFUZING TOOL,MORTAR PRACTICE ROUND

A device used by mortar crews as a defuzing tool for removing the fuze from a mortar practice round.

TEST SET,LASER GUIDED BOMB

A test set primarily designed for the testing of laser guided bombs.

COMPRESSION TOOL,WING ACTUATOR

An item designed to compress the springs and enable retraction of the wing fin or canard of a bomb or missile.

LINKER,POWERED

A power operated device designed to link ammunition.

LINKER-DELINKER,HAND

A hand operated device designed to assemble or disassemble metallic disintegrating linked belts for ammunition.

LINKER-DELINKER,POWERED

A power operated device designed to assemble or disassemble metallic disintegrating linked belts for ammunition.

MANDREL,CARTRIDGE CASE SECTION

A tool equipped with accessory anvils of specified shapes and sizes. It is used for holding cartridge cases of various sizes and shapes for reshaping and dedenting operations.

LINKER,HAND

A machine designed to manually link ammunition.

PROGRAMMER,ELECTRONIC COMMAND SIGNALS

An item which processes electronic command signals in a manner and sequence suitable for the predetermined automatic control of another item such as a missile or electronic computer.

TEST SET,BLASTING CAP

A test set primarily designed for use in making examinations of a blasting cap.

TEST SET,MINE CANISTER

A test set specifically designed to evaluate the functioning of mine canister equipment while in storage.

TEST SET,FUZE SAFETY AND TIMING DEVICE

A test set specifically designed for use in making examinations of the electrical circuits in the fuze safety and timing device prior to flight. It has an internal power supply or may use external power, if required.

FIXTURE,AMMUNITION MAINTENANCE

A part or group of parts that are designed to hold or position ammunition to facilitate inspection, repair, testing and/or replacement of components. Excludes fixtures designed for repair of guided missiles.

TRANSFER SYSTEM,AMMUNITION

An intermediate system used to transfer loose ammunition from storage configuration to replenish a loading system. May be manually or mechanically driven. For systems concerned with linked ammunition, use LINKER-DELINKER, HAND; LINKER-DELINKER, POWERED; LINKER, HAND; or LINKER, POWERED.

TEST SET,MINE PROGRAMMER

A test set designed for use in making examinations of a programmer of MINE,ANTIPERSONNEL and/or MINE,ANTITANK.

MAINTENANCE KIT,BOMB

A maintenance kit for components of a BOMB (as modified).

JOINING MACHINE,HAND

A device designed to manually join two or more metallic link belts. Excludes LINKER,HAND and LINKER-DELINKER,HAND.

TEST SET,BOMB FUZE

A test set specifically designed for use in making examinations of a FUZE,BOMB.

TEST SET,ROCKET

A test set primarily designed for use in making examinations of electronic continuity, fuze setting time, and the like in a rocket.

DEMAGNETIZER

An item specifically designed to remove magnetism from another item. For items specifically designed to disorientate the magnetic signal induced on tape or wire in preparation for the recording of another signal, see ERASER, MAGNETIC.

CHARGER,MAGNET

An item specifically designed to restore or establish the field strength of a permanent magnet by energizing it with an electrical current.

LATHE,RAILROAD WHEEL

LATHE,RAILROAD JOURNAL-AXLE

TUBE AND FLUE CLEANER,BOILER,INTERNAL

A hand- or power-operated tool designed to remove inside deposits from boiler tubes by cutting, and/or scraping and with or without brushing. It may also be equipped with a vibrator head to remove scale from the exterior of boiler tubes. Excludes BRUSH, WIRE, BOILER TUBE.

TUBE AND FLUE CLEANER,BOILER,EXTERNAL

A stationary floor type motor-driven mechanism, through which a boiler tube or flue is passed and the external surface of the tube is freed of scale.

BLAST CLEANING CABINET

A suitable inclosure equipped with necessary devices through which abrasive materials are ejected either by air pressure or by centrifugal force against surface to be cleaned. It is designed to allow the operator to perform his duties through protected hand holes, viewing the operation through a suitable window.

BLOCK,PITCH,PROPELLER

A precision machined and shaped metal block, on which marine propellers are checked, to insure accuracy of pitch, boring, blade spacing, and layout. It is also used as a gauge or an anvil on which a damaged propeller can be beaten and restored to its original pitch.

ARBOR,BALANCING,PROPELLER

A fixture having two sliding cones for centering the hub bore of a marine propeller used when mounting on balancing ways.

ARBOR,MOUNTING,PROPELLER

A fixture, having a cone and nut, designed for mounting marine propellers in position to be gaged and checked on a pitch block.

RACK,RAILWAY VALVE TESTING

A mechanical device, consisting of tanks, gages and valves mounted on a structural rack and used to determine the general condition of a railway brake valve and to discover wherein it deviates from the proper standards.

TESTER,AIR BRAKE

A mechanical device, consisting of a dial gage, a valve, and two couplings which are connected in the brake air line of a single car, for the purpose of checking the condition of the brake equipment.

MAINTENANCE PLATFORM

An item of equipment with small floored area(s) supported by scaffolding of metal or wood framework, either portable or stationary. For use in repairing, cleaning, installing, and inspection of property, machinery, and equipment above the general floor level. Excludes MAINTENANCE PLATFORM, AIRCRAFT and MAINTENANCE PLATFORM, GUIDED MISSILE or the like.

PRESS,TRACK PIN AND BUSHING,HYDRAULIC

A machine used for removing and replacing crawler type track pins and bushings.

PRESS,JOURNAL BOX,HYDRAULIC

A machine used to force bearings and bearing races into journal boxes.

PRESS,RAILWAY WHEEL

A machine primarily designed to force railway wheels on and off axles by utilizing a driving ram.

PRESS,BUSHING,HYDRAULIC

A machine consisting of base, two uprights and working mechanism including tank, pump, ram, and electric motor all mounted on top of uprights.

LEAK DETECTOR,REFRIGERANT GAS

GUN,AIR BLOW

A mechanical device designed for attachment to the discharge end of a compressed air line, for blowing dirt or other foreign substance from motors, machinery, and the like.

CLEANING GUN,PNEUMATIC

A cleaning gun with reservoir designed to spray water or solvents. It is used with a COMPRESSOR UNIT (as modified). For items that do not have a reservoir, see: GUN,AIR BLOW

CLEANING GUN,STEAM

SPRAY GUN,PAINT

A mechaincal device for bringing air and a stream of paint or similar material together, atomizing or breaking up the stream into a spray and ejecting it for the purpose of applying a coating to an object or surface at high speed. See also SPRAY OUTFIT, PAINT.

AGITATOR,PAINT,SHAKER TYPE

A mechanical device consisting of a power-driven can holder or holders which shake or vibrate the contents of the can. It is used for rejuvenating or conditioning paint and the like.

MIXER,LIQUID,REVOLVING HEAD

A mechanical device which consists of a hand-or power-driven head to which mixing paddles are attached, and a removable can, and may have a mechanically driven turntable for revolving the can.

MIXER,LIQUID,REVOLVING SHAFT

A mechanical device which may be fastened to a tank, vat, drum, and the like, consisting of an electric or pneumatic powered rotating shaft to which one or more stirrers or impellers are affixed. Excludes MIXING MACHINE, FOOD, ELECTRIC and MIXER, FLUID, ELECTRIC.

ELECTRONIC SHOP,SEMITRAILER MOUNTED

ELECTRONIC SHOP,TRAILER MOUNTED

A trailer permanently fitted with equipment and tools for testing and repairing electrical and electronic equipment. Do not use for shop equipment designed for testing and repairing guided missile maintenance, repair, and checkout specialized equipment. See also SHOP EQUIPMENT (as modified).

ELECTRONIC SHOP,TRUCK MOUNTED

A truck permanently fitted with equipment and tools for testing and repairing electrical and electronic equipment. Do not use for shop equipment designed for testing and repairing guided missile maintenance, repair, and checkout specialized equipment. See also SHOP EQUIPMENT (as modified).

INSTRUMENT REPAIR SHOP,TRUCK MOUNTED

TANK,PRESSURE-FEED,FINISHING-MATERIAL

A metal container of sturdy construction used to hold materials such as paint, enamel, lacquer, emulsified asphalt, flock, latex, and ceramic materials, under pressure until released through a remote-operated spray gun by the air-displacement principle. Flow is controlled by valves, regulators, and gages on a lid clamped securely to the container. Excludes cups or other containers secured directly to spray guns.

EXPANDER,HOSE EXPANSION RING

An item used to expand expansion rings inside hose, such as fire hose, so that external fittings may be secured to the hose.

ADAPTER,TEST

An adapter which provides facilities for electrically connecting an item to be tested and a piece of test equipment. Do not use for interconnecting cables. Includes plug-in electronic component socket adapters which provide terminations for dynamic testing while an electronic component is inserted. See also COUPLER, TEST SET.

VULCANIZER,RUBBER COVERED CABLE

A device for bonding patches or splices in rubber covered cable by means of pressure and heat.

SPRAY OUTFIT,PAINT

An outfit consisting of spray gun(s) with fluid and air hose and one or more accessories such as pressure tank(s), feed cup(s) and the like and with or without an air compressor. It is designed for applying paints and similar fluids in large area covering operations at high speed.

LATHE,ARMATURE AND UNDERCUTTER

CUP,PAINT,SPRAY GUN

SEPARATOR,OIL AND WATER,SPRAY GUN

A device for removing oil, water, dust and other foreign matter from compressed air for paint and metal spraying operations. It also regulates and indicates air pressure by means of valve(s) or gage(s). Excludes SEPARATOR, OIL and SEPARATOR, PIPELINE.

PRESS,SOLID TIRE

A machine designed for mounting and demounting pressed-on types of metal and/or rubber tires.

CASE,MAGNET CHARGER

Changed the (AEUSA) on 060117 to US usage.

CASE,TEST SET

UNDERCUTTER,ARMATURE MICA,ELECTRICALLY OPERATED

A machine specifically designed for undercutting armature commutator mica insulation segments. Excludes armature turning and undercutting tools. See also UNDERCUTTER, ARMATURE MICA, HAND.

BALANCER,WHEEL,NONELECTRIC

A portable device designed to speed balancing, straightening and truing operations for propellers, disks and wheels.

RESURFACER,COMMUTATOR

A portable device designed to true up commutators or slip rings without dismantling. This device mounts directly on the brush rigging or arm by means of bearing or rigid supports. Replaceable abrasive stones are mounted in a holder which travels along entire face of commutator or slip ring.

CLEANING MACHINE,FUEL CAN

CLEANING MACHINE,FUEL CAN AND DRUM

A complete unit designed to remove sand, mud, loose rust and sediment from the inside of gasoline containers by the spraying action of kerosene or other petroleum solvents.

CUTTER,MILLING,COMMUTATOR MICA

CHAIR,AERIAL CABLE

An item consisting of a seat suspended under two (2) grooved wheels by means of chains and/or a steel framework. When positioned on an aerial cable, it permits a workman to travel from one pole to another in making midspan repairs.

PLUG,CONDENSER TUBE CLEANING

A cylindrical item which is propelled by air or water pressure through the inside of condenser tubes to clean foreign deposits from the inner surface.

DEGREASER

A device designed to remove grease and foreign matter from mechanical parts and like items, usually metallic, by purging action in vaporized or liquid solvent or solvent-free solution confined in a tank or similar vessel. It usally includes a circulating pump, heating mechanism, and may include an auxiliary supply tank and spray equipment, and/or an ultrasonic generator. For ittems consisting essentially of a metal vessel with heating equipment, and adaptable to functions other than degreasing (e.g., wax melting), see TANK, HOT DIP (as modified). See also PARTS CLEANING CAN. SAFETY, BENCH. Excludes CLEANER, ULTRASONIC.

VULCANIZING MOLD,RUBBER COVERED CABLE

A form consisting of two or more matched sections specifically designed for use with vulcanizing equipment for splicing or patching insulated electric wire or cable.

LADDER,ROTATING,AERIAL

A ladder having a revolvable metal base which is designed to be mounted on a motor truck or trailer. It is adjustable to varying angles or inclination and rotation. It is designed for overhead installation and maintenance work.

CLEANER,STEAM,PRESSURE JET

A unit designed to remove surface deposits of foreign materials by means of a forced stream of steam and detergent or water. Excludes CLEANER, STEAM, PRESSURE JET, TRAILER MOUNTED; DISHWASHING MACHINE, COMMERCIAL; DISHWASHING MACHINE, HOUSEHOLD; and CLEANER, PRESSURE, SOLVENT-WATER.

BLAST CLEANING MACHINE

A mechanical device consisting of an abrasive container and necessary valves and attachments which, when connected to a source of air pressure, mixes the abrasive with air to be discharged through a hose and nozzle at high speed against a surface not contained by the machine, to perform the function of surface cleaning. May include abrasive recovery system. It is an entirely self-contained unit.

TEST STAND,HYDRAULIC SYSTEM COMPONENTS

A cabinetlike item usually with a front work area and consisting of the necessary instrumentation, integral hydraulic system and component mounting facilities. Designed to provide the hydraulic pressure for testing and/or calibrating hydraulic system components, such as valves, actuating cylinders, pressure regulators, accumulators, hose lines, hand and/or engine driven pumps and the like. May include facilities for filling and checking hydraulic systems for leakage and performance. See also PUMPING UNIT, HYDRAULIC.

WINDING MACHINE,COIL

An item of equipment designed to wind one or more types of coils, such as armature, field or magnetic coils, and may include any of a number of accessories.

HEAD,COIL WINDING

SPREADER,COIL,PNEUMATIC

STAND,MAINTENANCE,ARMATURE

FILLING MACHINE,ROTARY BRUSH

A machine designed for holding and revolving rotary brush cores while refilling with new fibers. May be manually- or power-operated.

CLEANING MACHINE,CEILING AND WALL,HAND OPERATED

A manually operated device consisting of feeder tank(s), pressure gage(s), hand pump(s), hose and liquid applicators. Used for applying cleaning solution and rinse water in washing wall, ceilings, etc.

TABLE,ELECTRICAL TEST AND MAINTENANCE

A table designed for general use in the testing of electrical circuits in the maintenance of instruments and appliances operated by electricity.

JACK SET,LOCOMOTIVE,ELECTRIC

Paired lifting devices used to elevate railway locomotives and rolling stock for underneath maintenance, such as repairing and/or replacing wheels and trucks.

SUPPLEMENTARY EQUIPMENT,HEAVY SHOP COMPANY

SUPPLEMENTARY EQUIPMENT,MAINTENANCE COMPANY

A group of items consisting of brake band lining, oil and grease, v-belts, inner tube repair kits, nuts and bolts, etc., for use with shop sets. It contains a large variety of expendable items and some special tools.

TOOL SET,AMBULANCE TRAIN MAINTENANCE CREW

TOOL SET,AMBULANCE TRAIN MAINTENANCE SECTION

TOOL SET,RAILWAY BOILER AND SMITH SHOP COMPANY

TOOL SET,RAILWAY BRIDGE AND BUILDING MAINTENANCE CREW

TOOL SET,RAILWAY ERECTING AND MACHINE SHOP COMPANY

TOOL SET,RAILWAY MAINTENANCE OF WAY CREW

TOOL SET,RAILWAY SECTION CREW

TOOL SET,RAILWAY SIGNAL AND COMMUNICATION MAINTENANCE CREW

PARTS KIT,REFRIGERANT GAS LEAK DETECTOR

A parts kit used in the repair of refrigerant gas leak detectors.

PRESS,HYDRAULIC,PORTABLE

A group of items consisting of a hydraulic ram and pump unit with attachments which, when assembled, will perform various functions of bending, straightening, forcing and pressing of metal parts. Excludes PRESS, ARBOR, HAND OPERATED.

CLEANER,PIPELINE,AIR PRESSURE

A hand operated appliance consisting of pump, air pressure tank, air pressure gage, and air release mechanism, designed to remove obstructions in waterlines and drainage systems by the impact of air under pressure against a column of trapped water.

JACK,ROTARY AIR MOTOR

A heavy duty screw type jack used in railroad work, industrial plants and the like. An integral rotary air motor supplies the power necessary to make the lift.

CLEANING ELEMENT,PIPELINE,FLUID PRESSURE

An implement which, when propelled through a pipeline by fluid pressure, is designed to remove obstructions therein by the actions of scraping, buffing, and/or cutting.

ELECTRONIC SHOP GROUP

INC 17402 REINSTATED ON 090711~A collection of items, and a subdivision of an ELECTRONIC SHOP (as modified), which is used in conjunction with other groups or items to provide facilities for repair of electronic components.

MIXER AND TANK,FLUID,ELECTRIC

A unit consisting of a MIXER, LIQUID, REVOLVING SHAFT permanently attached to a covered cylindrical tank. It may or may not have a draw-off faucet. It is used to mix or blend various materials in a fluid state. See also MIXER, FLUID ELECTRIC; FOOD BLENDER, ELECTRIC; and MIXING MACHINE, FOOD, ELECTRIC.

PRESSURIZING KIT,TELEPHONE CABLE

A grouping of related items designed to inject air or gas into a telephone cable for the purpose of testing the sheath for leaks and/or maintaining a permanent pressure within the cable. It may include accessories and special tools necessary for the installation of the pressurizing fittings.

TRAY,SHOP MAINTENANCE

A shallow, flat receptacle with a raised edge rim, used for holding, carrying, storing or displaying articles in a shop evironment.

FORMER,INSULATION

A hand operated device consisting essentially of a base, creasing roller assembly, guide brackets, and a ruler guide. It is used to form troughs in slot insulation.

SERVICE KIT,REFRIGERANT

A group of items consisting of adapters, gaskets, shutoff valve(s), hand tools, and the like. It is used in charging, purging and testing the refrigerant in hermetically sealed refrigerating units. See also TOOL KIT (1), REFRIGERATION EQUIPMENT.

HEATING TORCH,FUEL OIL BURNING

A portable, general purpose item designed for heating and/or thawing in maintenance or repair work. It consists of hose assembly(s), burner(s), and an integral or separate fuel tank. It may be either wheel mounted or equipped with carrying handles or straps. Excludes BLOWTORCH (as modified); BURNER, WEED, CART MOUNTED; and BURNER, WEED, MANUALLY CARRIED.

RESEATING OUTFIT,GLOBE-ANGLE-CROSS VALVE

A unit furnished with various size cutters and/or other tools necessary for the reseating or replacement of seats in globe, angle, cross valves, and the like. May be hand operated or power operated.

RESEATING OUTFIT,PUMP AND WATER CHEST VALVE

A unit furnished with various size cutters to reseat seats of discharge and suction valves of pumps, water chests and the like.

RESEATING OUTFIT,GATE VALVE

A unit furnished with cutters, cutter support, and a disk refacing machine, to reseat seats and disks in gate valves and the like.

BOOTH,SPRAYING

An assembled unit, usually constructed of sheet metal, specifically designed to confine and/or direct fumes, dust and overspray of paint, lacquer, corrosion preventative or like material to a suitable outlet or container. It may or may not be equipped with exhaust fan(s), circulating water pump(s) or both. It may also be incorporated with a tank as an integral or separate unit for storage of the water so circulated.

STAND,MAINTENANCE,STATOR

A device designed for clamping a STATOR (as modified) in position for operations such as insulating, winding, connecting, and tying.

CLEANER,STEAM,PRESSURE JET,TRAILER MOUNTED

A unit designed to remove surface deposits of foreign materials by means of a forced stream of steam and detergent or water. Excludes CLEANER, STEAM, PRESSURE JET; DISHWASHING MACHINE, COMMERCIAL; DISHWASHING MACHINE, HOUSEHOLD; and CLEANER, PRESSURE, SOLVENT-WATER

SPRAYING UNIT,CLEANING COMPOUND,TRAILER MOUNTED

A self-contained power operated mobile item designed to spray a solvent cleaning compound on surfaces to remove deposits of foreign materials. See also SPRAYING UNIT, CLEANING COMPOUND, SKID MOUNTED.

PARTS CLEANING CAN,SAFETY,BENCH

A portable, cylindrical metal item, with a hinged cover. It contains a perforated metal dasher (fire baffle) mounted on a vertical coil spring. It is used for cleaning small parts with flammable or other solvent liquids. The cover may have a metal stand attached to the top so that the cover, when fully opened, may be used for holding parts during the drying process. See also DEGREASER and SAFETY CAN.

CLEANING GUN,WATER

A pressure nozzle designed to operate by water pressure to deliver a hard driving stream of water. It is primarily used for removing caked mud, ice, grease, and the like from the chassis and under the fenders of cars and trucks. See also NOZZLE (as modified).

CAN,PLUNGER,FLAMMABLE LIQUID

A cylindrical metal container designed to dispense hazardous liquids through a center mounted plunger. It is used primarily for moistening cleaning rags, sponges, swabs and the like. In operation, a sponge or swab may be saturated by placing it over a screened circular tray which is mounted on the top of the plunger and exerting a downward pressure, forcing the liquid upward. The plunger automatically returns to an extended position by means of a compression spring, when pressure is released. See also CAN, BENCH, FLAMMABLE LIQUID. For items intended for temporary storage or handling of flammable liquids, see SAFETY CAN.

CAN,BENCH,FLAMMABLE LIQUID

A cylindrical metal container designed for general bench work requiring the cleaning of small parts with flammable liquids. In operation, parts are placed on a perforated metal dasher. When the dasher is depressed, cleaning fluid filters through the dasher screen and over the parts. It has a vapor-tight hinged cover for protection when not in use. See also CAN, PLUNGER, FLAMMABLE LIQUID. For items intended for temporary storage or handling of flammable liquids, see SAFETY CAN. Excludes items with separable wash baskets.

ENCLOSURE,ELECTROMAGNETIC SHIELDING

A prefabricated and/or demountable structure designed to encompass electrical apparatus and personnel for the purpose of shielding against electromagnetic or mechanical interference. For items that do not encompass personnel, see SHIELD, TEST.

TANK,COLD DIP

A receptacle mainly constructed of metal, wood, earthenware, or stone. It may be equipped with discharge outlet(s), piping, valve(s), fitting(s), and the like. It may be used to clean metal with solvent or acid solutions, as insulating varnish bath for electric motor armatures, for enameling, quenching, preserving, and the like.

TANK,MIXING,CORROSIVE MATERIAL

A tank designed primarily for mixing and storage of corrosive materials such as battery acid and the like. It may be equipped with an acidproof drain valve.

TURNTABLE,TYPEWRITER REPAIR

A device equipped with a revolving platform supported by a low base.

BOOTH,CLEANING AND INSPECTING,LENS

A self-contained unit usually equipped with lights, air filters, electric motor driven ventilating system, and the like, designed to provide an illuminated and dust free working area.

HOLDER,MAINTENANCE FIXTURE,MULTIPOSITION

A device having a stationary or adjustable base with movable arm(s) for affixing maintenance fixtures to hold items in convenient working positions. It is commonly used for benchwork and may be free standing. For items which include maintenance fixtures, see MAINTENANCE FIXTURE (as modified).

AUGER MACHINE,PIPE AND SEWER,POWER OPERATED

A machine consisting of a portable steel frame on which is mounted an electric motor or gasoline engine designed to drive flexible steel cables and/or flexible steel rods by means of clutch controlled power cable retrieving equipment. The cables and rods are designed for the mounting of various types of augers and cutting blades. It is used to open clogged pipe and sewer lines. For hand held items designed with a drive similar to an electric drill, see AUGER KIT, WATER CLOSET-PIPE AND SEWER, ELECTRIC.

TEST STAND,ROTARY ACTUATOR

A unit, consisting essentially of dynamometers and electrical power input and output(s), designed to test the performance and operation characteristics of an ACTUATOR, ELECTRO-MECHANICAL, ROTARY.

BLOWER,ELECTRIC,PORTABLE

A hand-held device consisting of a structural frame, fan and motor, with a stem or nozzle. It is used for blowing sawdust and the like from motors, machinery, and other delicate equipment. Excludes CLEANER, VACUUM, ELECTRIC and CLEANER, VACUUM, PNEUMATIC with attachments for the purpose of picking up dust and particles of dirt by suction.

PARTS KIT,PRESSURE JET STEAM CLEANER

WASHER,BEARING,HAND OPERATED

An item consisting of a gun, bearing holder, and usually a bucket with lid. A cone or roller bearing is placed in the holder on the bottom of the bucket, partially filled with cleaning fluid, with the nozzle of the gun resting on the bearing. The pumping action of the gun forces the liquid back and forth through the bearing removing old grease, dirt and foreign particles.

BASKET,DIPPING-DRAINING

A container made of perforated or open mesh material. It may have handle(s), bail(s), or hand grips, and may be furnished with hook(s) for use with conveyor systems. It is used for dipping and draining objects when cleaning and/or applying preservative coatings.

SERVICING PLATFORM,SELF-PROPELLED

A self-propolled item designed to provide a safe working platform for overhead or overhead and below the ground level installation, inspection, maintenance, repair, or construction operation. A small floored area (working platform) is mounted on articulated booms which may be rotated in any horizontal plane within the limits of the supporting equipment. The booms are cable and/or hydraulically operated and are controlled by mechanism located within the platform and/or on the vehicle. (Excludes MAINTENANCE PLATFORM and SERVICING PLATFORM, TRACTOR MOUNTED.)

HEATING TORCH,GASOLINE BURNING

An open flame burner designed to facilitate starting of internal combustion engines in any ambient temperature to minus 65 degrees Fahrenheit (53.9 degrees Celsius). It is capable of being lighted with a match at temperatures down to 90 degrees below zero. Any type gasoline or JP-4 fuel may be used. It may have a false bottom for the storage of high mortality repair parts, but will not include the parts. Excludes BLOWTORCH (as modified); HEATING TORCH, FUEL OIL BURNING; and TORCH (as modified).

ELECTRONIC SHOP,TRANSPORTABLE

A transportable unmounted electronic maintenance shop incorporating electronic test equipment and facilities for repair of electronic and communications equipment.

SPRAY KIT,SELF PRESSURIZED

An externally pressurized spray unit utilizing a container pressurized with a liquid gas, to atomize a product contained in a separate jar. Includes spray nozzle and valve with activating mechanism. It is used for spraying paints, primers, degreasing compounds, plastic sealing compounds, insecticides, or the like. Excludes aerosol self-contained spraying cans.

CLEANER,PRESSURE,SOLVENT-WATER

A pressure cleaner used to project streams of water detergents, soaps, or cleaning solvents for cleaning motor vehicle exteriors, engines, aircraft exteriors, and the like. Excludes CLEANING GUN, WATER.

TESTER,HYDRAULIC HOSE ASSEMBLY

A pneumatically operated unit consisting of a pump, a fluid reservoir, filters, lines, fittings, and control gages. It is specifically designed to perform proof pressure and leakage tests on hose assemblies.

SCALING AND CHIPPING MACHINE,ELECTRIC

A hand guided, electrically powered machine mounted on wheels. It has rows of cutter wheels, in bundles, loosely attached to the periphery of a drumlike frame. In operation, the frame rotates causing the cutter wheels to strike the surface to be cleaned. It is designed to remove paint, scale, rust, and other accumulations from steel and like surfaces.

SHOP EQUIPMENT,CBR EQUIPMENT

SHOP EQUIPMENT,COMBAT VEHICLE REBUILD

SHOP EQUIPMENT,COMMUNICATION EQUIPMENT

SHOP EQUIPMENT,ELECTRICAL EQUIPMENT

See also SHOP EQUIPMENT (1), ELECTRICAL EQUIPMENT, SEMI TRAILER MOUNTED.

SHOP EQUIPMENT,FLOATING BRIDGE

SHOP EQUIPMENT,FUEL AND ELECTRICAL SYSTEM,ENGINE

SHOP EQUIPMENT,UTILITY

SHOP EQUIPMENT,UTILITY,TRUCK MOUNTED

For use in conjunction with other motorized shops. Do not use if a more specific name is applicable.

SHOP EQUIPMENT,INSTRUMENT

SHOP EQUIPMENT,RESCUE AND SAFETY EQUIPMENT

SHOP EQUIPMENT,SAWMILL,CIRCULAR

A group of items required for maintaining and operating a SAWMILL, CIRCULAR.

SHOP EQUIPMENT,SMALL TOOL,TRUCK MOUNTED

SHOP EQUIPMENT,STORAGE RACK AND WORK TABLE

A group of items consisting of work table tops, material for table top supports, and material for racks and/or shelves to be assembled in a van, shelter, or the like, to perform maintenance work.

SHOP EQUIPMENT,TIRE

A group of items consisting of tools, accessories, and equipment, such as breakdown stands, vulcanizers, tire irons, and the like, designed for the repair of tires. Excludes SHOP EQUIPMENT (1), VULCANIZING, CABLE.

SHOP EQUIPMENT,TOOLROOM

A group of special tools, materials and equipment, such as storage bins, portable crain, degreasers, disk and the like, used in conjunction with other shops.

SHOP EQUIPMENT,VULCANIZING,CABLE

A group of items consisting of tools, accessories and equipment such as vulcanizer, vulcanizing molds, heating elements and the like, required for vulcanizing rubber covered cable. Excludes SHOP EQUIPMENT (1), TIRE.

SHOP EQUIPMENT,WELDING

A group of items, such as welding machines, welding positioners, and the like, designed for general welding and cutting operations.

SHOP EQUIPMENT,ELECTRONIC EQUIPMENT

See also SHOP EQUIPMENT (1), ELECTRONIC EQUIPMENT, SEMI TRAILER MOUNTED

PARTS KIT,SPRAY GUN

PARTS KIT,WHEEL BALANCER

SHOE,JACK-SUPPORT

An item of various materials and shapes, designed to create, enhance, or secure a supporting surface of a JACK (as modified) or SUPPORT (as modified) and the like. It can be installed temporarily or permanently under the material to bear for some maintenance operations, lifting, handling and the like.

REPAIR KIT,PLASTIC

An assortment of tools and application accessories and expendable materials, such as fibrous glass, cloth, mats, resin, rubber gloves, and the like, as are required for the repair of plastic items, such as cases, noninflatable boats, and the like.

TOOL AND EQUIPMENT KIT,RADIO SET

A group of items specifically designed to perform maintenance on a radio set.

TOOL AND EQUIPMENT KIT,OPTICAL INSTRUMENT

A group of items specifically designed to perform maintenance on an optical instrument.

REPAIR KIT,METAL

A Repair Kit consisting of panels, tools, application accessories and expendable materials required for use on the panels of shelters, containers, craft, and the like.

TABLE,POSITIONING

An item designed to accurately position another item for inspection, testing, maintenance or machining. The item is capable of linear and/or rotational movement but is not furnished with a work-holding device such as a chuck or vise. It may be manually operated or motor driven. Excludes POSITIONER, WELDING.

ADAPTER KIT,TEST

An adapter kit containing items such as adapters, cables, power supply, switching units, and auxiliary test means. Cases and special tools may be included. It is used to adapt items to the standard interface of a piece of test equipment.

REEL ASSEMBLY,HOSE

A circular device with flanged ends designed to accommodate a hose. May include components such as bracket(s), legs, hand crank, ratchet spring loaded device for automatic hose return, inlet and outlet ports for hose attachments. May be of high or low pressure and can be styled for floor, bench, service vehicle, trailer or ceiling mounted. Excludes WINCH, DRUM, (as modified).

SHOP EQUIPMENT,ELECTRICAL EQUIPMENT,SEMI TRAILER MOUNTED

A van type mobile unit which houses a group of items not all having the same basic name specifically designed to repair electrical equipment. See also SHOP EQUIPMENT (1), ELECTRICAL EQUIPMENT.

SHOP EQUIPMENT,CONTACT MAINTENANCE

Item consists of utility type body mounted on a chassis. The shop set is intended to provide tools and equipment for intermediate level maintenance personnel, when operating in the field and to allow limited repair of equipment of supported organizations. Electrical power is provided by an installed generator operated by the vehicle's power take off.

SHOP EQUIPMENT,ORGANIZATIONAL MAINTENANCE TRUCK MOUNTED

Item consists of a mobile shop, with folding sides and a rear opening type body mounted on a chassis and provided with an auxiliary canvas enclosure for cold weather operation. This shop set is intended to provide machine tools, equipment, and work space to allow organizational personnel to perform maintenance at limited intermediate maintenance repair of organizational equipment in the field. Electrical power is provided by an installed generator operated by the vehicle's power take off.

NOZZLE KIT,SPRAY GUN,PAINT

A kit consisting of a fluid nozzle, an air nozzle and a fluid needle valve assembly.

AIR NOZZLE,SPRAY GUN,PAINT

An item designed to atomize the fluid flow of different kinds of paint, sealers, primers, epoxies and urethanes through the action of air jets under high pressure and speed. It may have an adjustable spray pattern. It may include or be used in conjunction with FLUID NOZZLE, SPRAY GUN, PAINT.

FLUID NOZZLE,SPRAY GUN,PAINT

A device used to meter the fluid viscosity and volume by the orifice size and to direct the fluid into the air stream. It is used in conjunction with AIR NOZZLE, SPRAY GUN, PAINT and/or FLUID NEEDLE VALVE, SPRAY GUN, PAINT.

FLUID NEEDLE VALVE,SPRAY GUN,PAINT

An item used in conjunction with FLUID NOZZLE, SPRAY GUN, PAINT to shut off the fluid flow and to meter the fluid to some degree.

MAINTENANCE PLATFORM SECTION

An individual unit of metallic or nonmetallic material used with other pieces/parts to make up the MAINTENANCE PLATFORM; MAINTENANCE PLATFORM, AIRCRAFT; or MAINTENANCE PLATFORM, GUIDED MISSILE.

COVER,STEAM CLEANER

CANISTER,PRESSURIZE,AIR BRUSH

TEST STATION,PNEUMATIC SYSTEM COMPONENTS,NONAIRCRAFT

A group of items containing a console and peripheral equipment specifically designed for use in testing pneumatic components of other than aircraft, such as valves, controls and pressure regulators. May also supply fuel or conditioned air, and provide a mechanical loading system along with appropriate instrumentation and data acquisition/control logic for testing. See also TEST SET, PNEUMATIC SYSTEM COMPONENTS.

PILOT PIN,ACTUATOR

A headless cylindrical shaped item tapering along its length. A portion is threaded. It is used for aligining or fastening.

COLUMN ASSEMBLY,WATCH CLEANER

AIR CAP,SPRAY GUN

BODY,SIDE PORT,SPRAY GUN

BLADE SET,CUTTER,SEWER

A set of replacement blades specifically designed as a component of BLADE, CUTTER ASSEMBLY, SEWER.

BLADE CUTTER ASSEMBLY,SEWER

A rigid versatile cutting device consisting of multiple blades specifically designed for boring and/or tunneling into sewer pipes for the removal of debris.

AUGER,PIPE CLEANING,SEWER

A flat, spiral blade with cutting edges of front and back sides, specifically designed for boring and/or tunneling into sewer pipes for the removal of debris. Must be operated by power equipment.

GUN BODY,BLASTING UNIT

TABLE MAT,WORK STATION

BODY,SPRAY GUN

CLEANER,ULTRASONIC

An electrical device designed to clean items by using ultrasonic pressure waves. It consists of an ultrasonic generator for ultrasonic scrubbing action, controls, and may have a stainless steel tank, a basket with or without a cover, and the like. It may also include a heating element and timer. Excludes DEGREASER; PARTS CLEANING CAN, SAFETY BENCH; and WASHING MACHINE LABORATORY.

UNLOADER,STEAM CLEANER

CLEANING BALL,SEWER

ADAPTER KIT,MECHANICAL TEST

A collection of various types of ADAPTER (1), MECHANICAL TEST with associated mechanical and/or hydraulic and/or pneumatic connectors, linkages, and fittings necessary for the adaptation of test items to the standard interface of a tester/test set. Cases, special tools and cleaning supplies may be included. Excludes ADAPTER SET, TEST.

ADAPTER,MECHANICAL TEST

An item which provides facilities for mechanically connecting an item to be tested and a piece of test equipment. It may include hydraulic and/or pneumatic functions. Do not use for CONNECTOR, MULTIPLE, FLUID MEASURE LINE or MANIFOLD, HYDRAULIC SYSTEM ACCESSORIES or the like. Excludes ADAPTER (2), TEST.

PLATFORM LIFT

An item of equipment which may be self-propelled, truck mounted or trailer mounted. Item is designed to provide a safe working platform for overhead installation, inspection, maintenance, repair or construction. A small floored area (working platform) is mounted on scissor arms for vertical extension only. Working platform may include a cantilever for additional horizontal reach. Scissor Arms are hydraulically operated and controlled by a mechanism located within the platform and/or on the vehicle. Excludes SERVICING PLATFORM, as modified and MAINTENANCE PLATFORM.

BASKET LIFT,MAINTENANCE

An item consisting of a basket- or bucket-like conveyance for one or more persons to overhead or overhead and below the ground level installation, inspection, maintenance, repair or construction operations. The basket is mounted on articulated booms, designed to be mounted on a vehicle, which may be rotated in any horizontal plane within the limits of the supporting equipment. The controls mechanism may or may not be located within the basket.

BLAST CLEANING ROOM

A suitable inclosure equipped with necessary devices through which abrasive materials are ejected either by air pressure or by centrifugal force against surface to be cleaned. It is designed to allow the operator to perform his duties from his location within the inclosure. It may be additionally provided with material handling systems, and/or suitably equipped suits for inside operations. It may be stationary or portable.

PAN,DRIP

A metallic or nonmetallic receptacle which is placed under a motor, generator, appliance or in a similar location to collect liquid from overflows, leaks, condensation and the like. It may have one or more facilities for draining.

POWER UNIT,MAINTENANCE,TRAILER MOUNTED

A mobile power unit with electrical, pneumatic and/or hydralulic capabilities designed for full-service operation and full-serviceability. It consists of individual system modules to simplify service and maintenance. It is equipped with its own power, specilaized tools, supplies and equipment necessary to perform the required functions. This mobile unit will/can be used in the event of a power failure. See also POWER PLANT, UTILITY. Excludes TRAILER, MAINTENANCE.

STILL,RECOVERY

A portable, mobile or stationary still for the reclamation of chlorinated hydrocarbon oil and solvents used in degreasers, paint and the like.

SHOP EQUIPMENT,METAL WORKING

REPAIR KIT,ELECTRICAL CABLE

SHOP EQUIPMENT,ROTARY SWEEPER

SHOP EQUIPMENT,OPTICS

SHOP EQUIPMENT,OPTRONICS

SHOP EQUIPMENT,SURVEYING EQUIPMENT

SHOP EQUIPMENT,TUBE BENDING AND FLARING

SHOP EQUIPMENT,AUTOMOTIVE ELECTRICS

SHOP EQUIPMENT,RADAR EQUIPMENT

SHOP EQUIPMENT,GROUND CONVEYOR VEHICLE

GLUE GUN,ELECTRIC

A gun-shaped item designed to heat solid glue sticks thus enabling the application of the glue to a surface.

SERVICE KIT,RECORDER-REPRODUCER ASSEMBLY,SOUND

A combination of equipment such as DEMAGNETIZER and calibrator for communication equipment, tools, accessories and spare parts needed to perform repair and maintenance of a RECORDER-REPRODUCER ASSEMBLY, SOUND. CONTAINER MAY BE INCLUDED.

BLASTING MACHINE,WATER,TRAILER MOUNTED

A cleaning unit comprised of a pump, a driver, hoses, guns and accessories used for heavy duty cleaning of steel and other hard surfaces through the means of a high pressure water system and may have a capability of adding sand for sand blasting applications.

TEST STAND,WATERPROOF FLYING SUIT PERMEABILITY

A device designed for testing the permeability of a waterproof flying suit which is worn to stand the hazards of an accidental immersion. It consists of a mobile frame, a watertight transparent chest which can swivel upon the frame and is shaped like a human body, a water filling unit, control and measuring devices, a mannequin made of rigid materials that is hinged to accommodate the suit to be tested and put in the chest of an electric circuit. It may have a plotting board. The measurement is made while reading the difference of the liquid level after a pretederminated time has elapsed.

FIXTURE,TEST,MECHANICAL EQUIPMENT

A fixture used to position a mechanical device in a specific manner during testing of its various functions.

SPRAY GUN,ELECTRICAL,PAINT

A electromechanical device, based on the airless spraying principle, for atomizing paint or similar material and ejecting it for the purpose of applying a coating to an object or surface at high speed.

PRESSURIZING UNIT,SHIPPING AND STORAGE CONTAINER

An item made of one or more cylinders of inert gas (nitrogen, argon and the like). manometers, relief valves and pipe work for connection to the pressurizing valve of a SHIPPING AND STORAGE CONTAINER (as modified) to generate inside the container a pressure greater than atmospheric pressure thus preventing the ingress of ambient air. It is usually transportable and mounted on a wheeled support.

INSTALLATION KIT,SHOP EQUIPMENT

An installation kit to adapt a SHOP EQUIPMENT (as modified) in a container, trailer, semitrailer, shelter or the like.

SHOP EQUIPMENT,CALIBRATION

A group of items consisting of tools, accessories, and equipment to calibrate TEST SET (as modified), meters and the like.

CHARGING KIT,PRESSURIZING

A collection of components used to pressurize recoil mechanism in towed and self-propelled howitzers and the like. It consists of gage assemblies, charging assembly, cylinder valve adapters, and other relative components. May include case or box for housing or portability.

REPAIR KIT,ELECTRICAL SYSTEM

A repair kit consisting of tools and spare parts such as lamps, fuses, fuse holders, contractors, switches and so on, which is used for the repair and maintenance of an electrical system as can be found in buildings or on watercraft.

REGULATOR,NITROGEN

A single port item with a female connector and a standard Compressed Gas Association (CGA) gas inlet connnection fitting. It is for use with air powered surgical instruments. It may include operating pressure gauge, tank storage pressure gauge, safety relief valve, and a twist knob for increasing or decreasing the amount of operating pressure desired.

DEFLECTOR,HEATER,GUN TYPE,ELECTRICAL

An item of different shapes and sizes designed to deflect an air flow. It is used in the processing of heat-shrinking and other plastic products in connection with a HEATER, GUN TYPE, ELECTRICAL.

RECHARGING UNIT,COOLANT,LASER

An item designed to drain the used coolant, evacuate the air with a vacuum pump and recharge the coolant into the CO2 laser cooling system.

NOZZLE,HEATER,GUN TYPE,ELECTRICAL

An item of different shapes and opening sizes through which an air flow is conducted. It is used in connection with a HEATER, GUN TYPE, ELECTRIC.

PROTECTOR,PAINT

An rigid item of various shapes and sizes designed to protect certain parts of a vehicle, a shelter and the like, when coats of paint are applied.

COVER,PROTECTIVE,DUST AND MOISTURE SEAL

A cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.

CONTAINER DUMP,LOOSE MATERIAL

An item designed for accommodation and transport of materials such as soil, stones, chips, wastes and the like. For drainage the item is equipped with a dumping device. The item is equipped with safety devices against sliding and unintended dumping and may include the following additional devices: cover, stacking device, rollers, fixtures for crane, dolly truck or pallet truck and the like. For use as a metal chip container a perforated plate may be inserted above the container bottom to separate coolant from the chips. Prior to dumping the coolant may be drained via a spout by means of an outlet cock.

HEAT GUN,ELECTRIC

An electrically driven pistol-shaped device, normally hand-held, used to deliver hot air in excess of 100 degrees Celsius for drying, curing, forming, activating, softening, shrinking, and the like. The operating parts are usually housed in a protective inclosure. It may include air flow directing accessories and a means to hang the item. Excludes DRIER,ELECTRIC,HAND.

SAW,ROOT,SEWER CLEANING

A rotating tool specifically designed as an accessory for a sewer cleaning machine. It is a continuous, rigid, circular band with teeth on the front and back edges, is center mounted on a shank/shaft, forming a peripheral shaped cutter-shredder. The rotating shaft/shank also has teeth that work as a pull back to accommodate the removal of roots and solid debris that has been cut. Must be rotated by power equipment. For items with spiral blade see AUGER, PIPE CLEANING, SEWER.

GAGE,INTERNAL,BURIED CABLE CONDUIT

A mechanical item which is passed through the conduit between two cable trunks thereby determining the smallest cunduit diameter and recording that value on a suitable recording device by means of a drag indicator.

TANK,RECOVERY,LIQUID

A container which is designed to recover, in case of incident, liquids such as fuel, oil, water and the like used for testing. More often than not it is an integral part of a fuel liquid quantity gage vibratory test bench. Excludes: TANK, LIQUID STORAGE; TANK, RADIATOR, OVERFLOW and LAGOON ASSEMBLY, RETENTION, COLLAPSIBLE TANK.

HANDLING UNIT,ELECTRONIC EQUIPMENT

A handling unit, specifically designed for use in loading, unloading, mounting, removing, and/or assembling electronic equipment.

SPRAY OUTFIT,ADHESIVE

A portable electropneumatic unit consisting of a spray gun for hot melt bonding, a pressure tank and pressure reducing valve, and an electronic device for reading or adjusting temperature. It may include a holder or stand. it is designed for applying glue or other adhesives in large area covering operations.

SPRAY OUTFIT,PLASTICS PROCESSING

A combination of items such as spray gun, barrel pumps, material and pneumatic tubes, control units, preheating units and proportion units required for the processing of plastics for sealing, insulation and soundproofing purposes.

PARTS KIT,BLAST CLEANING MACHINE

A parts kit used to replace worn and/or damaged parts of a BLAST CLEANING MACHINE.

DRAWER,ELECTRICAL TEST SET ADAPTER

An item designed to fulfil a partial function in an ADAPTER (2), TEST which is constructed as a drawer unit. The item is not functional without other drawer units.

ADAPTER SUBASSEMBLY,ELECTRICAL TEST SET

An item which is a subassembly of an Adapter, Electrical Test Set and cannot be assigned a more definite item name.

NEST,OPTICAL ELEMENT,CLEANING KIT

An item designed to accommodate a lens or another element to be cleaned.

MIXING STATION,PAINT

Consists of a computer controlled, batch metering system for blending and mixing paint.

PAD,CHUCK,HOSE ASSEMBLY MACHINE

A flat, basically rectangular shaped item specifically designed to be used with a hose assembly machine. One end is notched to match either two or three sides of a standard wrenching facility of a fitting. It is used to tailor the holding capability of the chuck to a given size or range of sizes.

MODIFICATION KIT,MISCELLANEOUS MAINTENANCE AND REPAIR SHOP EQUIPMENT

An item or items employed to modify specially designed miscellaneous maintenance and repair shop equipment.

MAINTENANCE FACILITY,TRANSPORTABLE

The facility is equipped with work benches, storage cabinets, racks, lighting, air conditioning and power to form an electronic repair shop for the maintenance of electronic equipment. The power is usually supplied by a single 10KW Power Unit.

SPARES FACILITY,COMMUNICATIONS

Containes the spare parts required to support the maintenance and repair of communications assets.

SCRUBBER,UNDERWATER,HULL CLEANING

An item designed to clean ship hulls under the waterline. It operates by a pressure water driven turbine. It usually includes two BRUSH, UNDERWATER SCRUBBER, handles, a fitting, and the like.

MAINTENANCE FIXTURE,GEAR BOX

A device for temporarily supporting and holding a gear box unit during repair and/or test.

ADAPTER,CABLE BREAKOUT

An item designed to electrically and physically accommodate cable connectors and the terminations to which the cable would normally be connected, and thereby provide facilities for the insertion of test equipment leads, probes, and the like, for test and/or monitoring of power, intelligence, and the like, that may be on the wire complement of the cable. The item may provide facilities for either series, shunt, or interwire tests of the cable under actual operating conditions.

ADAPTER SET,CABLE BREAKOUT

A set consisting of two or more ADAPTER, CABLE BREAKOUT with associated connecting cables that provide facilities for the insertion of test equipment leads, probes, and the like, for test and/or monitoring of power, intelligence, and the like, that may be on the wire complement of the cable. The item may provide facilities for either series, shunt, or interwire tests of the cable while under actual operating conditions.

ADAPTER SET,TEST

A grouping of items consisting of two or more ADAPTER (2), TEST. May include a mounting, or other facility for storage and rapid access to individual adapters.

COUPLER,TEST SET

A component which provides a means of transfer of electrical energy between a test set and another component(s). See also ADAPTER, TEST.

DOLLY,TEST EQUIPMENT

A hand-propelled device consisting of three or more wheels attached to a frame, and designed for carrying or supporting test equipment. May include facilities for connecting and interconnecting components of the test equipment to obtain electrical operating power or functional utility. Test equipment components are not included.

HOOD,ANTISPLASH

An item designed to be placed over and/or around a container to protect personnel from splashing of liquids during cleaning operations.

MAINTENANCE FIXTURE,ANTENNA DRIVE

A device for temporarily supporting and holding an antenna drive unit during repair and/or test.

MAINTENANCE FIXTURE,ROTARY SWITCH

A device for holding various types of rotary switches during adjustment and test.

SEALING COMPOUND GUN,HYDRAULIC

A specifically designed item utilizing a hydraulic cylinder which develops a high pressure to force SEALING COMPOUND through a cylindrical container and special fittings to secure optical elements, and the like, in a fixed position within an instrument. The cylinders are connected by a flexible high pressure hose which includes the necessary connectors and a pressure gage. Excludes CALKING GUN; LUBRICATING GUN, HAND; and GREASE GUN, PNEUMATIC.

FILLING SET,COOLANT FLUID,RADAR

A set consisting of a compressor, coolant fluid, tubes(s), valves(s), fittings or any combination of the items listed above. Used to fill the coolant system of a radar during maintenance and/or repair.

JIG,DRILL,INSTRUMENT,VEHICLE

An item designed to align drill points in preparing the mounting of an instrument in a vehicle. Excludes BUSHING, DRILL and GUIDE, DRILL.

PURGING SYSTEM,DRY NITROGEN

An apparatus designed to purge equipment that require humidity protection and moisture inhibition such as electronics, electro optical, high voltage switchgear, cameras, lenses and thermal imaging systems and the like, using dry nitrogen.

LIFTING TOOL,MAGNETIC

A permanent lifting magnet designed to lift, move and fasten various ferrous materials and workpieces.

BLOWER-VACUUM,ELECTRONIC EQUIPMENT,PORTABLE

A hand-held device consisting of a structural frame, fan and motor, with a stem or nozzle. It is used for removing dust and debris from electronic equipment highly sensitive to dust and static build up in fields. Excludes BLOWER, ELECTRIC, PORTABLE; CLEANER, VACUUM, ELECTRIC; CLEANER, VACUUM, PNEUMATIC, and BLOWER-VACUUM, PORTABLE.

FLANGE,HOSE REEL DRUM

An item usually flat and circular which is mounted on the two sides of a DRUM, HOSE REEL to constitute a REEL ASSEMBLY, HOSE. Excludes FLANGE, REEL, CABLE.

FILLING MACHINE,FIRE EXTINGUISHER

An item designed to fill an EXTINGUISHER, FIRE or an EXTINGUISHER, FIRE, AIRCRAFT with a fire extinguishing agent such as powder, carbon dioxide, water, nitrogen, and the like. It may also be used for emptying and/or transferring.

LID,TEST SET CASE

An item of various shapes and material designed to enclose the top portion of a CASE (2), TEST SET. It is mounted to the case by means of bolts, clamps, latches, or the like.

MAINTENANCE ATTACHMENT,UNDERSEA VEHICLE

An item mounted on an UNMANNED UNDERSEA VEHICLE to facilitate maintenance and/or repair operations. It must be unmounted from the vehicle before being reassembled.

TEST STATION,ELECTRICAL-ELECTRONIC EQUIPMENT,CONTAINERIZED

A group of items specifically designed for testing electrical-electronic equipment. Does include container(s)/shelter(s). May include instruments,test programs, tools, power supply, and related equipment. May also include vehicles and trailer(s).

FILTER ELEMENT SET,FLUID

A group of FILTER ELEMENT,FLUID having different characteristics.

CHARGING AND TESTING UNIT,NITROGEN

A mobile unit used to charge and test an item (infrared equipment, guided missile, guided missile shipping and storage container and the like) containing nitrogen. It allows one to verify nitrogen pressure and may analyze the item using a nitrogen scan. It can be reloaded from a source containing nitrogen such as a bottle or the like.

WASHER,ROPE

This item is designed to clean ropes. It may include brushes, a connector to allow attachment to a hose, and the like.

REMOTE CONTROL,INSTRUMENT-EQUIPMENT

A wired or wireless transmission device that provides remote control for equipment or instrument by pressing buttons mounted on the device. Excludes REMOTE CONTROL,HANDHELD,UNIVERSAL; REMOTE CONTROL,HANDSET,TELEVISION; REMOTE CONTROL HANDSET,VIDEO and REMOTE CONTROL RADIO DEVICE,HANDHELD.

BASKET,ULTRASONIC CLEANER

An item designed for use in a CLEANER,ULTRASONIC to hold articles during the cleaning process.

COVER,BASKET,ULTRASONIC CLEANER

An item designed to be used on a BASKET,ULTRASONIC CLEANER.

MAINTENANCE KIT,TELESCOPIC SIGHT

A portable optical tool kit used to maintain various hand-held spotting scopes that are used by forward observers, designated marksmen, reconnaissance units, field artillery, and tank crews.

PROBE-SLEEVE,RETRACTOR

An instrument used to inspect the sleeve and/or remove fuel or other liquids.

FABRICATION SHOP,TRANSPORTABLE

A group of items consisting of tools and materials used for the fabrication of unavailable mission critical final production part(s). It may contain machinery such as three-dimensional printers, scanners, milling machines, welders, water - jet cutters, and the like.

SCRAPER ASSEMBLY,PAINT CAN

Two or more scrapers on a common mounting designed to scrape out excess wet paint remaining in a paint can. The assembly is fixed onto a drum used to retrieve the paint that drips out of the paint can during operation.

TEST STATION,GUIDED WEAPONS,MULTISYSTEM

A group of items containing a console and/or peripheral equipment specifically designed to provide appropriate instrumentation and data acquisition/control logic for the testing of multiple guided weapons systems/subsystems. Excludes TEST STATION, GUIDED MISSILE.

TEST PROGRAM SET,GUIDED WEAPONS,MULTISYSTEM

A collection of items used to facilitate inspection, fault detection, fault isolation, maintenance, repair, and other evaluations of multiple guided weapons systems, and/or components. May include cables, fixtures, interface adapters, self-test programs, software, and operational instructions. Excludes TEST PROGRAM SET, GUIDED MISSILE.